Rp-Sma Male To Rp-Sma Female Antenna Extension Cable 10'

Rp-sma Male To Rp-sma Female Antenna Extension Cable 10'

Product Code: eq173597
Availability: In Stock

$44.91 $61.08

Qty

19 reviews Write a review

Description
Reviews (19)

The RP-SMA Male to RP-SMA Female Antenna Extension Cable 10'extends a detachable antenna on your wireless router up to 10' away. StarTech has designed this cable with a RP-SMA male connector on one end and the other side has a RP-SMA female connector. This design lets you relocate the antenna to improve the wireless router's signal performance.

Extends Wireless Range of Routers Compatible with RP-SMA Antennas

Hardware
Cable Jacket Type	RG-174/U
Connectors
Connector 1	1: RP-SMA (coax; reverse polarity subminiature A) male
Connector 2	1: RP-SMA (coax; reverse polarity subminiature A) female
Physical Characteristics
Cable Length	10' (3 m)
Packaging Info
Package Weight	0.135 lb
Box Dimensions (LxWxH)	7.8 x 5.1 x 0.5"

Extension cable for wireless devices with a RP-SMA antenna connector

Extends the distance between antennas and wireless networking devices

Low loss at 2.4 GHz frequency range

Related Questions and Answers

Q: 1. can I use these screws to screw a Sirui TY-5DIIIL L-Bracket Plate to my Canon 5D III camera?

A: The d ring has a clearance requirement of 3/4 over the width of the ring handle. This would require your mountung slot/hole to have at least 7/8 clearance to rotate

Q: 2. I wish to purchase a Sirui G-10X Ball Head and replace the screw with this one. Do I use this one or the QR version?

A: First, this is a very professional and high quality! The D ring is also a great plus. I replaced all my plates with this and other better quality screws. The screws that come along the plates are so cheap.

Q: 3. I have a MEFoto tripod which uses an INDURO PU 50 Swiss Arca plate. Can I remove the current screw and replace with this D screw without damage to the plate or the camera?

A: I have done that with two plates. Works great. Screw easily removed and new one easily installed. Beats the heck out of that flat head screw. Mefoto should have used the D screw to begin with.

Q: 4. Can I use the d ring to hook into the black rapid strap (10lbs of weight)? Or the pins aren't sturdy enough.

A: I don't think it would be a good idea.

Q: 5. What is the size of the Plate?

A: 50mmx47mm,and it is compatible with Giottos head and ball head

Q: 6. is this fit to Gitzo G1276 ball head plate?

A: No, the following plate will fit; https://bhpho.to/35uT72o

Q: 7. Would it hold a heavy camera like the canon 5d mark iv?

A: I would not suggest that. Good for me d90 but I would go with a bigger quick release

Q: 8. What are the actual dimensions of this mount? Under specs it say 3.0 x 2.4 x 0.5 which I assume must be the packaging size based on the picture and the relative size of the mounting screw. I am looking for a very small mounting system with quick release to use on a hiking pole as a tripod. I want as small as possible for both the mount that will stay screwed on to the bottom of the point and shoot camera (sony Rx 100M3) and the female receptacle portion of the mount that will screw on to the top of the hiking pole.

A: Hi Tim,The lower section of the base (largest dimension for the RP-10) measures 1.55 square. It measures 0.46 thick. The thickness measurement includes the flexible non-marring pad that is attached. Please note these measurements apply only to the RP-10 trapezoid shown in the picture, not the associated latching base.

Q: 9. Can someone measure the width of the d-ring for me? I need something to replace the coin screw on my Vanguard QS-39 plate and it is a tight space. Thanks.

A: The ring is about 1/2".

Q: 10. What is the purpose of the small spring-loaded pin?

A: Is a safety pin to lock in the camera position and prevented it from twisting. Certain cameras provide this option next to the built-in 1/4-20 threads.

Joseph	11/09/2024
[0.135 lb] We purchased this to extend our sure wireless antenna to outside in front of our church. It worked like a charm. Priest, said mass, then walked outside to bless the pets, without having to change mics or swap over to another AV system. We remoted the antenna and speakers 100Meters away from the sound board to in front of the main church. We had over 200 pets at the blessing. 5

ahinesobc	04/09/2024
[0.135 lb] Don't let the product photo fool you - this is a serious bit of cable. At about 1/2 in diameter, its not a cable you use casually. Its perfect for long runs where it might be subjected to some abuse. There are better options for short runs or anywhere such a massive cable would be overkill. 5

Michael M	04/09/2024
[10' (3 m)] Excellent quality cables that get the job done! Easy to wrap and have enough flexibility. 5

CMS	02/08/2024
[RG-174/U] I needed a remote antenna for my wireless microphones.� This cable allowed me to make that happen.� Good quality cable. 5

Greg	13/07/2024
[0.135 lb] Works great for mounting remote antennas for wireless microphone systems. 5

Scott	07/07/2024
[RG-174/U] We bought these to go with the new antennas we needed to fix the low signal issues we had. They work great and we have had no issues with them. 5

James	07/07/2024
[RG-174/U] Worked perfect! I actually used them with Audio Technical Paddle Antennas. 5

greg k.	05/07/2024
[10' (3 m)] This is just what you need for today's short corded headphones. I bought 4 (four) of these 10' cables. They are very high quality. The headphone input is made of metal, not plastic, which is a nice feature. These extension cables are great for monitoring work when recording or just listening from a stereo receiver. I like them. 5