The Manfrotto MVH500A Video Head with MVT502AM Tripodfeatures a fluid head with a wide platform to support the HDSLR form factor, and a 60mm half ball for quick leveling without adjusting the legs. The head supports a maximum weight load of 17.6 pounds and has a built-in, pre-set spring-loaded counterbalance of 5.3 pounds. It features a tilt range of -70°/+90° and provides a panning rotation of 360°. The head also features a side lock system for the sliding quick release plate, a pan handle, and an integrated bubble level.

The two-stage tripod features a 75mm bowl and includes a 75 to 60mm adapter for the MVH500A head. The legs are individually adjustable and feature a mid-level spreader for stability on uneven ground. The minimum height of the tripod and head is just over two feet, for getting low angle shots, and the maximum height is just over five feet. The legs feature non-removable feet suitable for exteriors and interiors, and are gentle on delicate floors. The included padded carry bag makes transporting your tripod and head simple and easy.

Supports 17.6 Pounds    Wide Platform for Camcorders & HDSLRs    60mm Half Ball for Leveling    Spring-Loaded Counterbalance    Side Lock Quick Release System    Integrated Bubble Level    Two-Stage Tripod with Mid-Level Spreader    26.6 to 60.6" Height Range    Rubber Feet    Padded Carry Bag

The wide camera platform provides support for DSLR cameras, making this head suitable for both camcorders and DSLR cameras.

The 60mm half ball allows you to quickly level the head without having to readjust the legs. It also makes it simpler to create Dutch angle shots without dangerously unbalancing the tripod.

The spring-loaded counterbalance is fixed at 5.3 pounds; however, the head supports 17.6 pounds, and the counterbalance will still provide assistance when using camera setups heavier than 5.3 pounds.

Professional fluid cartridges provide fixed fluid drag in both the pan and tilt axes.

The head features a tilt range of 90 degrees forward and 70 degrees back, allowing you to tilt the camera straight down, and tilt it almost straight up.

The head pans through 360 degrees, allowing you to take long panoramic shots or spin the camera around on the head.

The side lock system allows the sliding QR plate to click into the head from above, instead of needing to be aligned and slid in from the back. This gives you the speed of a touch and go quick release with the balance adjustment capability of a sliding plate.

An integrated bubble level on the head aids you in quickly leveling the fluid head.

The included 500PLONG sliding quick release plate includes both a 1/4"-20 and 3/8"-16 camera tie-down screws.

The head includes one pan bar and features two pan bar mounting rosettes, one on each side of the head, for left or right-handed operation. A second optional pan bar allows you to operate the head with two pan bars at the same time.

The Easy Link connector is a 3/8"-16 threaded hole in the side of the head that allows you to easily mount accessories to the fluid head itself, and not the camera.

Related Questions and Answers

Q: 1. My tripod case strap broke and I can't seem to find this particular case that came with the MVK500AM tripod set anywhere. It fits perfectly and that is quite important for my travels. The ones I tried are either too short, too long or too narrow. What alternative Manfrotto case would you recommend?

A: An alternative will be the Manfrotto MBAG75PN bag (MABMABAG75PN ).

Q: 2. I own this tripod, but the mid level spreader is very loose. It makes it hard to easily move your shot without having to fix the legs again once placed back down. What should I do? Can I buy a tighter mid level spreader compatible with this tripod??thanks.

A: Hello, We set our tripod up and it never really moves from its current location. So we don't pick it up. I would contact Manfrotto and see if they have any options.

Q: 3. will this adapter fit any 75mm bowl? I am trying to mount a 60mm half-ball to my gitzo system 3 with 75mm half-bowl.

A: While we cannot test this configuration and thus cannot guarantee the set-up, we have the opinion this will do what you wish.

Q: 4. Referring to the plate: how do I get the screw into the threads? They are two separate pieces. I got the shaft part into the plate, but now I need to fit this empty threaded cylinder over it. It JUST barley won't fit

A: What you're talking about is a 1/4 -3/8 reducing bushing that is only needed if you're planing on using a camera that has a larger 3/8 mount instead of a standard 1/4 . If that's the case, then you should screw the bushing into the bottom of the camera, not onto the screw. Then you can use the screw on the plate to mount the plate onto the camera.

Q: 5. Have Manfrotto 520mvb legs with 65mm bowl. Want to fit flat base 503 head. Is there a suitable bowl available. Specs seem to expect 75mm but I've measured top of tripod and empty bowl is 65mm. Thanks

A: Sorry, but currently there is no known 65mm bowl to flat base adapter. If these is imperative, an appropriate sized bolt and one, maybe two large washers should be able to mount the head on the tripod.

Q: 6. Does this come with the exact same Manfrotto 535 tripod that sold by itself is $669?

A: Yes, this kit does include the Manfrotto 535 Carbon Fiber Video Tripod, B&H # MA535.

Q: 7. Can I use the 128RC micro head on this tripod?

A: Not without an adapter. This is a bowl mount tripod and the 128RC has a flat base. So you would need to purchase a 520BALL or 520BALLSH half ball adapter.

Q: 8. can you release the mid level spreader? I've heard you can't detach that at all. How much can you actually spread the legs?

A: Sorry, no you cannot remove the spreader on this tripod. The max spread is what you see here about 22.

Q: 9. I have a 65mm bowl video head im trying to attach to a 75mm bowl tripod legs, would this fit?

A: This is a solution for 60mm video heads, it will not work with a 65mm heads. I'm afraid we do not have such an adapter either.

Q: 10. What is the screw size hole on the side of the plate?

A: If you are referring to the hole seen in this photo on our website that is a 3/8"-16 thread. https://bit.ly/2rQusEx