The Osram 64516 CP/97 Halogen Lamp 230V 300Wis a clear 300W, 230V halogen bulb designed for projectors as well as stage and studio applications. It outputs up to 7900 lumens with a color temperature of 3150K and a CRI of 100, and has a rated lifespan of 75 hours.

Tungsten Halogen T6 Lamp    Color Temperature: 3150K    Output: 7900 Lumens    CRI 100    GX6.35 Bi-Pin Base    Rated Lifespan: 75 Hours

Related Questions and Answers

Q: 1. I read online that this can actually fit on the 24-70 2.8s and the 70-200 2.8s essentially making it only required to buy one set of 112mm filters for all three lenses. Is this true, is this hood compatible on all three trinity lenses? Thanks!

A: The Nikon HB-97 Lens Hood for Z 14-24mm f/2.8 S Lens will not work as a lens hood for the NIKKOR Z 24-70mm f/2.8 S Lens or the NIKKOR Z 70-200mm f/2.8 VR S Lens--it is the wrong diameter and the wrong shape to function as a lens hood for those lenses.

Q: 2. Does this modeling lamp work in the Broncolor Pulso G light head? The number is the same as recommended for Pulso G.

A: Yes, the Broncolor 300W Modeling Lamp for Minicom 160 (120V) is compatible with the Broncolor Pulso G light head.

Q: 3. Do you know if this will hold a Canon 500mm f4 lens with the hood reversed?

A: The bag will be too small to fit that combination in it along with a camera. Check out B&H # LOPRBP450AW.

Q: 4. Will this hold a canon R3, lenses and dji rs3 pro gimbal?

A: No, the Evoc CP 18L Camera Backpack (Heather Gold) is too small to fit the R3 2-3 lenses and a DJI RS3 pro gimbal.

Q: 5. Could a Nikon 500 f4 attached to a Nikon D500 body fit in the bag??

A: The bag's interior is 13.4 x 21.7 x 7.5 / 34 x 55 x 19 cm. The lens is 15.24 x 5.51 / 387 x 140 mm. The camera is 5.8 x 4.5 x 3.2 / 147.0 x 115.0 x 81.0 mm. Camera and lens together is approximately 18 1/2 long and since the bag is 21.7 , we see no issue.

Q: 6. can the remote panel be set for single press routing, for a shading station?

A: We are not certain of the exact function you are looking to perform with this product, however we do have the instruction manual on our website. Here is a link to it, this will allow you to familiarize yourself with what this product can and cannot do. https://bhpho.to/2JPmQIJ

Q: 7. Does this have a built in rechargeable battery or must it be used with AA batteries?

A: Hi James, no rechargeable battery built in but perfect with 8x nimh rechargeable AA batteries !

Q: 8. what power cord will work with CP-E4N to connect to Metz 64 AF-1?

A: There is no power cord that will allow these to work together. The cord on the battery pack is hardwired and the shape of the connector is different. Unfortunately the Metz P76 battery pack is no longer available. We do sell a cable that will allow you to use quantum type battery packs to power your flash. The BH# for the cable for those battery packs is QUCM4. Hope that helps.

Q: 9. ARE THESE LAMPS DIMEABLE??

A: These lamps would be dimmable but it all depends on which fixture it is being used with and if that fixture can accept an external dimmer.

Q: 10. Will this work with the new Canon Speedlite 470EX-Al. If not, is there a battery pack that will? Thanks!

A: The 470ex-al does not have a port for an external battery back.