The Photek Brella Box Square Kit Photography Lightingis a stand-alone fluorescent light source that sets up and breaks down as fast as an umbrella. The 32 x 32" softbox is supported by the included 4-lamp fixture. The included U-shaped, Edison base lamps are rated 25W for a total of 100W and have an ideal color temperature of 5600K.

Removable Front Face    High Output Silver Interior    4 x 25W Fluorescent Fixture    5600K Lamps Included    5/8" Stand Mount

Related Questions and Answers

Q: 1. How long is the pole?

A: its about 80"

Q: 2. What is the weight of the Kupo KS140611?

A: It weights about 7 lbs.

Q: 3. is this umberella 8ft across? and if so do you make a 6ft across version?

A: This umbrella is 7 feet across or 84”. While this model only comes in a 7 ft size, the Photoflex 72" Shoot Through Umbrella B&H # PHU72ST would be closest to 6 ft.

Q: 4. Is this compatible with the ringlight below?: Godox LR160 Bi-Color Ringlight (Black)

A: Yes. The following will accommodate the ring light.

Q: 5. Can I put 4 LED light bulbs (25W or under) onto this instead of the Fluorescent ones?

A: As long as the ballast on the bottom of the LED lights you purchase fit without bumping into each other, yes, you may use LED bulbs in place of fluorescent bulbs in the Photek Brella Box Octagon Kit. (Some LED bulbs are wider than others, so the bulbs fitting may be a concern).

Q: 6. I plan to use the Kupo KG601711 baby boom with this stand along with Kupo KS940422 80mm caster wheel set. Compatible? The footprint diameter is adequate although I am concerned about the aluminum frame. The front-end load totals under 6.1 Lb. Importantly, will the castor set impede the function/ safety of the stand with boom?

A: I use this Stand an boom on location. I have never had a concern about the boom being able to support and main light and large modifier when properly counter balanced. I do not have casters on my stand. If you are rolling on a very smooth floor the casters should do nicely. I was a little disappointed in the sturdiness of the stand. It flexes in the wind when extended and a supporting a loaded boom. But it seems to be holding up okay for now and it's hard to find another stand with the same specs that's any more sturdy. If you find something lmk. Thanks!

Q: 7. will this work on a new led tota?

A: Yes, this would work with the LED Tota as well as the original.

Q: 8. What is the folded up length ?

A: Approximately 50 inches

Q: 9. the shipping box size is 42 so whats the collapsed height of the light stand?

A: The collapsed length of the stand is 36".

Q: 10. are 2 of these sturdy enough for a slider? Looking to use it with a Glidegear dev4 and sony fs5.

A: Yes, would make a perfect combo to the Glidegear dev 4 unit.