Create another 1,500 prints with your select imageCLASS printer by picking up a fresh Canon 131 Magenta Toner Cartridge | High-Quality Printingfrom Canon.

For Color imageCLASS LBP7110Cw, MF8280Cw, MF628Cw, and MF624Cw Printers

Color imageCLASS LBP7110Cw
Color imageCLASS MF8280Cw
Color imageCLASS MF628Cw
Color imageCLASS MF624Cw

Related Questions and Answers

Q: 1. Is there a 4-pin lemo power adapter that is acceptable for plugging this into AC? (aside from using a dummy battery).

A: Currently there is no lemo power cable option from DJI. However, You could power the DJI High-Bright Remote Monitor when using the included NP-F Battery Adapter and using the following wall power supply. Power2000 AC-F550 AC/DC Adapter with Sony L-Series Dummy Battery BH #POACF550 • MFR #AC-F550 https://bhpho.to/3jbydiF

Q: 2. Will this work with the Manfrotto 425b mega boom?

A: Yes, the Kupo High Roller Stand will accommodate a mega boom but we highly suggest pay load the stand when using with 25lbs sand bags.

Q: 3. Does the telescope connect to the tripod with a standard 1/4 connection?

A: This model comes with a standard 1/4 20 threading.

Q: 4. The On-Stage LSB-6500 shows up as a bag for it under the accessories tab. Does the bottom with the wheels on actually fit in it?

A: Yes, but its a very tight squeeze. we suggest the following unit for a better experience. Matthews C-Stand Rolling KitBag for 3 Stands (Black) BH #MA339776 • MFR #339776 https://www.bhphotovideo.com/c/product/1356864-REG/matthews_339776_c_stand_rolling_kitbag_holds.html?sts=pi

Q: 5. Can the SanDisk 64 GB EXTREME UHS-1 SDXC function at its maximum in this camcorder for videos?

A: The Sandisk 64GB Extreme UHS-1 SDXC will work without an issue on the camera, however the camera will not come close to using the full speed of the card. You can use the 64GB Ultra: https://bhpho.to/2gQLMix

Q: 6. Does this come with the 5/8 studs? If not, which would best be used to mount an Avenger D600 mini boom? Thanks in advance.

A: This stand has a retractable 5/8 stud that is off center and you can mount an Avenger D600 to it. If you would like to have the boom in the center of the column, you may use the following adapter: a href= http://bhpho.to/1A8oJ5e target= _blank http://bhpho.to/1A8oJ5e/a

Q: 7. I have my car that I can put stands of 132 cm. My question is if I take out the 20 cm wheels to this stand can I get into my car? How tall is this collapsed stand without wheels?

A: According to the MFR the way the wheels are positioned removing them will save about 2" reducing the length to about 56"(about 142cm).

Q: 8. How do I mount something with a 3/8"-16 Threaded mount hole on this?

A: Please review the following item in order to do so. Manfrotto 014-38 Rapid Adapter - 5/8" Stud to 3/8" Thread BH #MA01438 • MFR #014-38 https://bhpho.to/3LRzjKN

Q: 9. Can you buy the retractable triple function combination head by itself w/o the stand?

A: The triple function head built onto the top of the Kupo High Roller Stand (14') is not available as a separate accessory. It is dedicated to this light stand.

Q: 10. Would this be a good stand for the Aputure 600d?

A: Yes, the Kupo High Baby Stand (13.75') is compatible with the Aputure 600d.