The DPA 3511A Stereo Kit with 4011A Cardioid Micsby DPA 3511A Stereo Kit with 4011A Cardioid Micsis designed for use when capturing instruments or vocals in recording and live sound reinforcement applications. The 3511A kit includes two frequency-matched 4011A cardioid microphones, two UA0897 shockmounts, two UA0896 foam windscreens, two UA0961 microphone holders, one DUA0019 spacer for stereo boom, and one UA0837 stereo boom excluding holders.

The 4011A cardioid microphones are matched within 1 dB on frequency response, sensitivity, and self-noise. These cardioids are linear in their frequency response and allow for several different setups, such as ORTF and XY configurations. The microphones can handle high SPL for both close-miking and distant placement. The 3511A kit can be used for piano recordings of jazz or pop or as an overhead for drums and other instruments.

2 X Cardioid Condenser Microphones    Total Transparency    Detailed High-Frequency Character    For Live Sound & Recording    Transparent Output Stage    20 dB Pad Switch

Cardioid pickup pattern provides maximum separation between sound sources

Equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments, and vocals

Flat on-axis frequency response and high-quality phase response

20 dB pad switch in the center of the XLR connector to attenuate the output of the microphone

Related Questions and Answers

Q: 1. Best wind shields for this? Both fluffy and wind shield?

A: The Sennheiser MZW-8000 Windscreen (BH #SEMZW8000) is the best choice of foam windscreen for the Sennheiser MKH 8040 Compact Cardioid Condenser Microphone. For higher wind scenarios, the Rycote Baseball Windscreen and Baseball Windjammer Combo Kit (0.7" Diameter Hole) (BH #RY039710) is a great solution.

Q: 2. Hi Works with MKH 8060 +MZF 8000 filter? Thanks!!! Renzo

A: No, The Rycote 010320 Super-Shield Kit for Shotgun Mics (Small) is for shotgun microphones up to 200mm long and it will not be able to accommodate the Sennheiser MKH 8060 when combined with the Sennheiser MZF 8000. The MKH 8060 is 178mm long and the MZF 8000 is 29mm long, which is 207mm when used together. Instead of the small Rycote Super-Shield, you can use the Rycote 010321 Super-Shield Kit for Shotgun Mics - Medium (B&H # RYSSKM) which accommodates mics that are 200 to 250mm long.

Q: 3. Are these good to capture wildlife and nature sounds when paired with a Sony PCM-D10?

A: Yes the Microphone Madness MCSM-4 would be ideal for that kind of application.

Q: 4. Do the DPA 4099s come with a carrying case, and if so what does one look like?

A: The DPA Core 4099 do not come with a case.

Q: 5. Would this be the correct model for the Sennheiser MKH 50?

A: The Super-Shield Kit for Shotgun Mics (Small) from Rycote will accommodate several mics including the MKH-50. Rycote also recommends the Modular Windshield WS 2 Kit for a more robust solution.

Q: 6. Can Sennheiser MKE 600 fit in this?

A: Hi there,It's not our official recommendation; however, you should (just about) be able to get away with an MKE 600 in the Super-Shield, Medium, since it's only 6mm over our recommended length. We would still recommend the Large, though!If in doubt, it might be an idea to bring the mic along to a dealer and try it inside the Medium, since everyone's needs are different.

Q: 7. Is there any way to switch out the cable to use with a mid-side mic like the Sanken CMS-50? Do you sell such a cable?

A: Yes, you can replace the cable that is included with the Rycote 010320 Super-Shield Kit for Shotgun Mics (Small). The Sanken CMS-50 Short M-S Stereo Shotgun Microphone has a 5-pin XLR output connector which requires a Y-cable that splits to two 3-pin XLR male connectors like the Sanken SC-532 5-Pin XLR Female to Dual 3-Pin XLR Male Adapter Y-Cable - 1' (B&H # SASC532), the Remote Audio 5-Pin Stereo XLR Female to Dual XLR Male Y-Cable - 18" (B&H # RECAXSTE), or the Sennheiser ACS5 5-pin XLR Female to Dual XLR Male Y Cable for MKH418S and MKE44P Microphones -6" (B&H # SEACS5). You can also make a custom cable yourself or have one made for you with the appropriate connector to fit the windshield and pistol grip.

Q: 8. Can this screw onto a boom pole? If so, what are the thread specs?

A: Yes, the Blimp can be attached to a boompole, threading size is 3/8"

Q: 9. Will my sennheiser 416 fit ?

A: The correct model of Super-Shield for the MKH416 is the Medium (MFR # 010321): a href= http://www.bhphotovideo.com/c/product/1044548-REG/rycote_010321_super_shield_kit_medium.html target= _blank http://www.bhphotovideo.com/c/product/1044548-REG/rycote_010321_super_shield_kit_medium.html/a

Q: 10. Would this set be appropriate for ASMR/binaural recording? I am on a relative budget but want as best quality of sound as I can get.

A: appropriate is relative. these are good mics. they compare to Shure SM81s. They are accurate. their part in the total audio chain from reality to ASMR is just one part. my guess is that they will work well. again, all the other parts of the audio chain have their own effects. most important is how YOU will use them.