The PD-117 3-Way Pan/Tilt Head from Oben allows independent camera adjustment on the horizontal and vertical planes as well as 360° panning. The head has a load capacity of 17.6 lb, making it suitable for most DSLR camera and lens combinations, as well as many camcorders.

Two locking handles control the front-to-back and side-to-side tilt, and a thumb screw locks and unlocks the panning motion.

The quick-release system includes an RP-20 plate with a video pin, and a safety lock on the release lever, preventing accidental release of the camera. Two bull's eye levels, and three tubular levels ensure your camera will be level on both the horizontal and vertical axes.

Load Capacity: 17.6 lb    360° Panning    Quick-Release System with Safety Lock    5 x Bubble Levels

Related Questions and Answers

Q: 1. I have this, but mine is very stiff, especially for panning (yes, with the levers loosened). What would be the best way to loosen up the head? Lubricant, a hidden adjustment screw, ____? Thanks for the help.

A: DO NOT!! use anything other than a 'Syl-Glide' lubricant, and when you do, use very,very little!! Available at 'Auto Zone, auto parts store; comes in a 4oz. tube by AGS. for approximately $7.99. You can also use this on your tripod legs. Remember to use very,very little. Make sure that you clean and re-lube periodically as all lubricants do attract dust and fine dirt particles.SuperSniperSal

Q: 2. Are the handles removable?

A: Yes, you can unscrew the handles from the head. However, the threads tend to get thick grease on them from the internals, so you would need to keep them clean from debris.

Q: 3. what does this weigh?

A: The Oben AC-1451 4-Section Aluminum Tripod with PD-117 Pan/Tilt Head weighs 5.3 lb / 2.4 kg.

Q: 4. Is the Oben AC-1451 Pan tilt head fluid as well?

A: You can use the tripod to pan video. I use it mostly for still shoots

Q: 5. will this support a D700 with battery grip AND a 70-200 lens?Thank you

A: The Oben AC-1451 will support up to 13.2 pounds, including the camera/lens combination of a gripped D700 body with 70-200mm f/2.8 lens.

Q: 6. I bought this panhead for my tripod and want to get a ball head for my monopod. I don't want to have to change quick release plates, but, so far, I cant tell which heads can use the same plate. Can anyone help?

A: Your tripod head has a RP-20 quick release plate. If you search 'Oben Ball Head' on the B&H site you will find a few ball heads which use the same plate. Not all of them, just click on 'in the box' and the quick release model will be there. Oben BA-117T is one of them. You should have no problem from there good luck.Bob G

Q: 7. Will this head work with Oben AC-1310 tripod?

A: Yes, it is compatible with the AC-1310.

Q: 8. Is this compatible with the Robus RCM-439 4-Section Carbon Fiber Monopod?

A: Yes, the Oben PD-117 3-Way Pan/Tilt Head can be mounted directly on top of the Robus RCM-439 4-Section Carbon Fiber Monopod, 65".

Q: 9. Will this tripod make a smooth Pan with a 5d en it?

A: I have a 7D and even with fairly larger lenses the head on this tripod is flawless. It is a little stiff but in return you get a balanced pan. unlike a loose head. I do some cinematography and it works perfect.

Q: 10. I have this tripod and notice that the tube is threaded on the inside. I'm guessing that this is to add an attachment like a sandbag or weight system? Is there an item from Oben or another that would use these threads?

A: The threading on the center column is to add counterweights/hooks.