Vocas Remote Switch 19Mm 20Mm Tubes

Vocas Remote Switch 19mm 20mm Tubes

Product Code: eq173810
Availability: In Stock

$943.35 $1,433.89

Qty

17 reviews Write a review

Description
Reviews (17)

The Vocas Remote Switch 19mm 20mm Tubesfits on any 19 or 20mm tube, such those found on Vocas leather handgrips, and allows you to send a start/stop record signal to your camera. To use this switch, it needs to be connected using a camera-specific remote cable (sold separately). Remote cables are available for the Sony PMW-F5 / F55, the ARRI Alexa, and the Canon EOS C100/300/500 cameras. This remote switch can be used with various accessories such as handgrip kits, remote switches and cables, and switch assemblies.

Fits on Any 19 or 20mm Tube Attach to Vocas Handgrips Requires Additional Remote Cable

Parameters
Compatible With	Vocas Handgrip kit with two short leather handgrips, Leather handgrip SHORT, Separate handgrip, Separate remote switch assembly, Handgrip kit with two handgrips, Remote cables for the Arri Alexa Camera, Remote cable for Canon EOS C100, C300, C500 Cameras; Remote cable for Sony PMW-F5 and F55 Cameras, and Remote cable with an open end.
Packaging Info
Package Weight	0.15 lb
Box Dimensions (LxWxH)	8.3 x 6.2 x 4.7"

Related Questions and Answers

Q: 1. I just purchased this remote in May. Stopped working today. This is probably a stupid question, but is there any kind of timeline that I should expect life from this unit?

A: Canon provides a 1-Year limited manufacturer warranty on their products, so that is the limit that they expect to provide coverage and support for the item. Otherwise there are too many potential factors involved in the lifetime of anything.

Q: 2. am using cannon 5d mark3.. can i use this with mark 3 ?

A: No, the Canon RS-60E3 Remote Switch is not compatible with the Canon EOS 5D Mark III DSLR camera. The Canon RS-60E3 Remote Switch uses the Canon E3 2.5 sub-miniphone input jack, and is not compatible with the N3 3-pin remote terminal on the Canon EOS 5D Mark III DSLR camera. The Canon Remote Switch RS-80N3, B&H # CARS80N3, would be the correct remote control compatible with the Canon 5D Mark III DSLR camera.

Q: 3. Is this compatible with the T6i?

A: This is the one you need Remote Switch RS-60E3

Q: 4. is this compatible with EOS 6D Mark II ?

A: Yes. I have one for my 6D Mark II.

Q: 5. Remote for canon 6d

A: I use it on both my 6d and 5d III

Q: 6. I've read on Amazon that this is a counterfeit item. One pointer would be that the model designatiuon has the dash in the wrong place (RS60-E3, original Canon RS-60E3). Is this true? How can we determine we are dealing with an orginal Canon item here?

A: B&H is an authorized Canon reseller. Any item on our site that says Canon would have been distributed to us through Canon. Thus, this will be an authentic Canon remote control. Though, if you are concerned, you could verify with Canon B&Hs standing as an authorized retailer (which we would not be able to retain if we were selling counterfeit Canon items).

Q: 7. Does the Canon remote switch RS-80N3 work with the Canon 80D?

A: No, the 80D has a different pin connector than the 80N3. You would ned to use the RS-60E3 (if Canon) or similar aftermarket remote.

Q: 8. WIll this work with the 50D? If not, do you have a remote switch that you recommend for it? Thanks.

A: No, this remote is not compatible with the EOS 50D camera. Below are two similar options which are for you to consider:http://bhpho.to/1f4bVVphttp://bhpho.to/1f9NrIi

Q: 9. Can I use this remote when my camera is set up for back button focusing? Will I need to manually focus first and then use the shutter button?

A: Yes, you will have to use the BBF button to focus your camera the same as you would if your were holding it. Think of the RS-80N3 as a second shutter button on a long cord.

Q: 10. Is this compatible with an EOS 5D? (not a Mark II or Mark III, but a plain 5D)

A: Yes, the 5D is compatible with either Remote Switch RS-80N3, Timer Remote Controller TC-80N3 or the Wireless Controller LC-5.

Jimmie	25/08/2024
[0.15 lb] I should have taken a picture with it. It is a nice visual eyepiece and I found it excellent when holding my eye with it screwed up just enough where my eyelashes do not touch it. I bought it for wide angle views and in my f/7 102mm triplet the Pleiades fit it at 37x, in my f/5 reflector it catches the whole cluster easily. With no coma corrector the Double Cluster in Perseus came in with barely any star stretching, but I had my primary mirror refigured to a high 1/12th wave of light and .98 Strehl and it was near perfect. I looked at M42 Orion Nebula with the Luminos 2.5x Barlow at 94x and felt like it was all around with a Neodymium Moon and Skyglow filter. Then looked at the 25% waxing Moon and the terminator came in near perfectly at 94x, but for Jupiter I'd need to change eyepieces though I can see the bands and moons I'd need a 4x or a 5x Barlow to zoom in closer, but this isn't a planetary eyepiece. Although in my f/7 102 Sigma Orionis was next to perfect with its multiple stars that at 94x all 4 stars fit in the FOV I tried other multiple stars and got all 3 of Mizar's stars as well. Excellent eyepiece and worked well with the Luminos Barlow as well, it was like they were made for each other (I think they were). 5

MJP	22/08/2024
[0.15 lb] Product came and went right to use. excellent eyepiece, well made and heavy. when you hold it and look at it you can feel and see the quality. 82% field of view and clear. I am very pleased with this piece and also have the 7mm, 1.25inch piece which is equally as good. 5

Guy Rubinstein	27/07/2024
[0.15 lb] One of the best handle-grips I know! Great built-quality, very good grip thanks to the leather handles. 5

Gerald	19/07/2024
[0.15 lb] This eyepiece offers a wide field of view which enhances the immersion experience. You are not just only looking at stars you feel surrounded by them. I don't wear eyeglasses but they have good focal relief and retractable eye cups. 5

Timothy	19/07/2024
[0.15 lb] I have owned one of these since I shot with a 5D mark3. Never a problem. Recently I had to replace , my original because the wire part developed a break in the soft black covering. Great product, in fact, nothing lasts forever. 5

CW	13/07/2024
[0.15 lb] Views are outstanding. Build quality exceptional. Like the eye relief. If you are going to get just one 2 Luminos this would be your best choice. Not to big or heavy. 5

Dr.Nick	03/07/2024
[0.15 lb] Right size. Good quality. As advertised. 5

Pete from Prime8	27/06/2024
[0.15 lb] I use this with the vocus baseplate/shoulder mount and its top notch. Excellent quality, tough and lite. Does exactly what its supposed to. Going from tripod to handheld and back to tripod has never been easier. Oh, and the wooded handgrip is a pleasure to use. 5

Daniel	05/06/2024
[0.15 lb] Wow, how can I better express the quality of this screw? Unusual, yes, but if you need just this type of screw, this is it. The photo doesn't begin to show its qualities, the shininess, the rigidity, and yes, the length! In all seriousness, the screw did just what I wanted. I am using it to attach a ball head to a 3rd party arca swiss clamp. 5