The Pearstone PM Series TRS to XLR Cable 3'is ideal for audio applications in which a device with an XLR output needs to be connected to a device with a balanced 1/4" input. Typical scenarios include connecting a microphone preamp to a line input on a mixer or connecting an outboard effects processor to an aux return.

The cable is equipped with 24-gauge oxygen-free copper conductors and spiral shielding to protect against EMI and RFI noise. The professional-grade cast-zinc Rean XLR connector is field serviceable and features silver-plated contacts, while the Rean 1/4" TRS connector features a molded design for maximum strain relief. The twin conductive PVC shield reduces electrostatic noise and distinguishes the PM series as the best value in its class.

1/4" TRS Male to XLR Female Cable    24-Gauge OFC    Twin Conductive PVC Shield    Spiral Shielding    Rean XLR Connector    Rean 1/4" TRS Connector    Cast-Zinc Black Shells    Silver-Plated Contacts

Professional quality, field-serviceable, cast-zinc Rean connectors with silver-plated contacts

Twin conductive PVC shield reduces electrostatic noise

24-gauge oxygen-free copper conductors

Spiral shielding to protect against EMI and RFI noise

Related Questions and Answers

Q: 1. Would this cable work with a Rode Go II receiver?

A: Yes, the Saramonic SR-UM10-CC1 would be compatible with the Rode Wireless GO II receiver.

Q: 2. When connected to the H5, will the L/R backup track feature still be available?

A: The backup recording feature is available when recording the L/R inputs with any of the available modules.

Q: 3. How is this cable?

A: Beachtek is offering a quality coiled cable.

Q: 4. Will this capsule work with the Zoom F1 Field Recorder, to add XLR Input channels?

A: Yes, it works with the Zooms proprietary 10 pin connector, you can use that or any of the other Zoom capsule accessories. But just like Richard says, the dual XLR accessory isn't capable to provide phantom power. Not on the F1 or any other compatible recorder.

Q: 5. Does this item come with 3.5mm jacks inside of the XLR ports?

A: No, the EXH-6 features XLR/TRS combo inputs. The TRS jacks are 1/4" or 6.3mm.

Q: 6. What is the input impedance on these XLR ports? Do they support a Hi-Z mode for guitar pickups? Trying to figure out the easiest way to add a DI for H5/H6

A: John is correct, the XLR/TRS inputs are not Hi-Z inputs for guitars. I recommend running guitars through a direct box and then into the XLR inputs of the Zoom.

Q: 7. How long is this cable. The description says upto 31.5" but the picture looks like it will barely go 12". Anyone know for sure?

A: The BeachTek SC25 3.5mm to 2.5mm TRS Output Cable is approximately 12" when compressed and it extends to 31.5" when fully stretched.

Q: 8. Will this module still provide the power to enable lav mics without power to work. In other words if I connect two lavs with xlr jacks will they each provide the voltage that the stereo 3.5mm jack did on the standard xy mic module, Not looking for phantom power, I know they won't do that. Also will this module still retain creating a backup -12db stereo tracks from the LR channels.?

A: This unit does not provide phantom power but you already know that. If you are talking about a wireless lav mic then yes, it will work because the power comes from the receiver, usually powered with batteries, with a XLR output that you plug into the module. Again, the module supplies NO power to the mic receiver and of course a wireless lav mic must also have a powered transmitter in order to provide a signal for the powered receiver. As far as I know the 3.5mm jack is NOT powered. It is simply an input for a stereo mic. Depending on how you configure the recorder (which mode you select) determines how you record each channel (independently vs. stereo) and as such, allows you to record an independent mono track with a 12db variance.

Q: 9. Is it compatible with the Zoom H8 recorder? Looks like not because it may be in the way of the top two xlr inputs on the h8?

A: Yes, the Zoom EXH-6 Dual XLR/TRS Combo Input Capsule for H5, H6, and F4 Recorders is compatible with the Zoom H8 recorder.

Q: 10. does this work with Zoom H6 All Black (2020 Version)?

A: Yes. This will work with the Zom H6