The Pearstone PM Series TRS to XLR Cable 15'is ideal for audio applications in which a device with an XLR input needs to be connected to a device with a balanced 1/4" output. Typical scenarios include connecting the output of a mixing board or audio interface to a powered speaker, or using an aux send to route signal to an outboard effects processor.

The cable is equipped with 24-gauge oxygen-free copper conductors and spiral shielding to protect against EMI and RFI noise. The professional-grade cast-zinc Rean XLR connector is field serviceable and features silver-plated contacts, while the Rean 1/4" TRS connector features a molded design for maximum strain relief. The twin conductive PVC shield reduces electrostatic noise, and distinguishes the PM series as the best value in its class.

1/4" TRS Male to XLR Male Cable    24-Gauge OFC    Twin Conductive PVC Shield    Spiral Shielding    Rean XLR Connector    Rean 1/4" TRS Connector    Cast Zinc Black Shells    Silver-Plated Contacts

Professional quality, field-serviceable, cast-zinc Rean connectors with silver-plated contacts

Twin conductive PVC shield reduces electrostatic noise

24-gauge oxygen-free copper conductors

Spiral shielding to protect against EMI and RFI noise

Related Questions and Answers

Q: 1. Why does this module have a power input? Can it be used by itself as a separate recorder?

A: The DC5V USB-C power input on the Zoom EXH-6e Dual XLR-1/4" TRS Input Capsule for H6essential Portable Recorder would be used for powering condenser microphones with an XLR connector, because these types of mics require 48V phantom power.

Q: 2. When connected to the H5, will the L/R backup track feature still be available?

A: The backup recording feature is available when recording the L/R inputs with any of the available modules.

Q: 3. Are these balanced or unbalanced?

A: These cables are balanced.

Q: 4. How is this cable?

A: Beachtek is offering a quality coiled cable.

Q: 5. Will this cable help me connect a Rode VideoMic with a 3.5 mm plug to my Canon Rebel T6 with its 2.5 mm remote control input? Thank you!

A: The Rebel T6 is not able to accept a mic input via its remote jack.

Q: 6. could this replace the cable for the Rode Filmmaker Kits?

A: Though not tested. It is possible that it will work.

Q: 7. Can I use this cable to connect my Sony UWP RX to the TA3 connection of the Mixpre-10 II?

A: No, you would instead use BH #CAMINLPUOX18 for connecting your Sony receiver into one of the XLR mic inputs on the Sound Devices MixPre-10 II.

Q: 8. Which pins are the tip, ring, and sleeve wired to, respectively?

A: Unfortunately Saramonic has not made a wiring diagram for the SR-UM10-C35XLR available.

Q: 9. Looking for cable to connect the Vello Freewave Wireless Shutter Release to my FujiXT-2. Vello receiver sized for 2.5mm. XT-2 has 2.5mm or 3.5mm available. Will this work for this application?

A: Take a look at the camera's manuel, if the 3.5 is for remote hook up, no, if the 2.5 MM is for audio that should tell you same thing. My Fujifilm XF-100F uses 2.5 MM port for both MIC/REMOTE and is clearly labeled as such. This being my first Fuji camera can't really speak to the XT-2 but......if you are not using PS (non web based) to process you Fuji Raw files may I ask what program you are using. CS5, ON1 and DxO do not support Fuji RAW, ON1 will process it but converts to Adobe RGB thus negating the menu driving film styles in the camera.

Q: 10. Will this connect the Rode Video Mic to my Leica V-Lux 4?

A: Don't know but if you call B&H and ask for a audio or camera rep they will tell you, I use it on other make equipment.