The Pearstone PM Series TRS Male to XLR Female Cable 50'is ideal for audio applications in which a device with an XLR output needs to be connected to a device with a balanced 1/4" input. Typical scenarios include connecting a microphone preamp to a line input on a mixer or connecting an outboard effects processor to an aux return.

The cable is equipped with 24-gauge oxygen-free copper conductors and spiral shielding to protect against EMI and RFI noise. The professional-grade cast-zinc Rean XLR connector is field serviceable and features silver-plated contacts, while the Rean 1/4" TRS connector features a molded design for maximum strain relief. The twin conductive PVC shield reduces electrostatic noise and distinguishes the PM series as the best value in its class.

1/4" TRS Male to XLR Female Cable    24-Gauge OFC    Twin Conductive PVC Shield    Spiral Shielding    Rean XLR Connector    Rean 1/4" TRS Connector    Cast-Zinc Black Shells    Silver-Plated Contacts

Professional quality, field-serviceable, cast-zinc Rean connectors with silver-plated contacts

Twin conductive PVC shield reduces electrostatic noise

24-gauge oxygen-free copper conductors

Spiral shielding to protect against EMI and RFI noise

Related Questions and Answers

Q: 1. If I plug a stereo mic to the VXLR+, does it mix both channels into one mono? Or this just uses one of both stereo channels?

A: When using the Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter with a stereo microphone, the output will be summed to dual mono. Please note that most microphones with a 3.5mm TRS connector provide dual mono output signal and not true stereo output. An actual stereo microphone will have two mic elements instead of one.

Q: 2. Will this work with the Tram TR50?

A: Hello Stan, I show the TR50 as a XLR connection and therefore it would not. If there is a TR50 available with a 3.5mm TRS connector then yes, this will work for you.

Q: 3. Does this work with the Deity D3 pro microphone ?

A: No. Because the D3 is self powered you can use the regular VXLR https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html

Q: 4. I'd like to connect my on cam cold-shoe shotgun mic (sennheiser, takes AAA) to audio mixer (zoom F4). Is this what I'm looking for?

A: You can use that but it isn't necessary. You can use a simpler adapter like B&H # KOAXMMF or B&H # ROVXLRB&H # ROVXLR

Q: 5. Does this work with the Sennheiser MKE2 Gold EW lapel mic?

A: Yes it will.

Q: 6. Sanken COS-11D Omni Lavalier Mic With a Sennheiser 3.5 EW connector work properly with this adapter please?

A: My previous answer may be inaccurate. Some COS-11D microphones are 48V Phantom and some are +3V to +10V. You will need to determine the power requirements of your microphone. The VXLR Plus provides 5 Volts.

Q: 7. Can this be used as an adapter for PA's or DJ's desks into a XLR input on a recorder?

A: The Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter is typically used to adapt microphones with 3.5mm wiring to XLR inputs, however this adapter could presumably work in the same manner with a line level 3.5mm connection from a DJ deck into a line level XLR input on a recorder.

Q: 8. My guess is that you can’t, but is it possible to only buy the phantom power converter?

A: The RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter adapts an XLR input with phantom power to a 3.5mm input with plugin power. There is no consumer device that does this without any connectors, although some type of OEM circuit may be available from electronics suppliers if you are working on a custom build.

Q: 9. Can I use this to connect the DJI Mic2 Transmitter to a Rodecaster Pro 1?

A: The RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter can work to output from a DJI Mic 2 receiver, to the XLR input on a Rodecaster Pro, together with a 3.5mm output cable. Since the power conversion is not needed for this setup, I would recommend the less costly Rode VXLR 3.5mm TRS Female to XLR Male Adapter instead: https://bhpho.to/42sHsNK . Depending on the situation, especially if wireless is not needed, you may also want to consider other microphone options. Please reach out to us for help choosing one that meets your specific requirements.

Q: 10. Hi, Does this adapter come with the clip that goes around the middle? I don't see it on the pics...

A: From what I see on Rode's site, this does not come with any belt clip. For an adapter that does, I would recommend the Deity #DEDXLR, which also does the same job.