The 50' Kramer 2 RCA Male to 2 RCA Male Stereo Audio Cable 50ftis a dual RCA cable assembly designed for stereo audio signals. It is used for audio connection of DVD players, VCRs, and other consumer-style devices that are routinely used in professional AV systems. The gold-plated connectors ensure the best possible signal transmission without corrosion, while the color-coded red and white molded ends are designed to match most consumer-style equipment.

Stereo RCA Cable    Quality Construction    Precision Gold-Plated Connectors    Color-Coded Red and White

• Quality Construction: Two coaxial conductors for L/R audio signals terminated with male RCA connectors on both ends
• Precision Connectors: Gold–plated RCA connectors are featured for the best possible signal transmission without corrosion
• Easy to Use: Connectors are molded and color–coded red and white to match audio connectors found on most consumer-style equipment

Related Questions and Answers

Q: 1. Does it work with handy cam/camcorder's audio input female port ?

A: I DON'T KNOW, HAVEN'T USED IT THAT WAY, ONLY OFF OF LAPTOP

Q: 2. Would this work with my mm-bsm-8 binaural headphones and MixPre-3 II to enable use of the kashmir XLR preamps instead of the aux-in one?

A: No, the ALZO adapter will not work because the MM-BSM-8 binaural headphones require 1.5 to 10 VDC plug-in power and the XLR inputs on the MixPre-3 II can supply 48V phantom power which is way more than needed and will likely damage the mic. The mic is designed to be used with the 3.5mm stereo plug. We have not tested it with adapters to confirm whether there will be issues with phasing and/or noise created by using a Y-type adapter, but it is very possible that could happen. If did want to try using a stereo 3.5mm Y-cable, you would need to use two XLR adapters (one for each input) like the Rode VXLR+ (B&H # ROVXLRP) which has a built-in power converter that converts phantom power to plug-in power. For the Y-adapter, you can try the Hosa Technology Stereo 3.5mm Female to Dual Mono 3.5mm Male Airline Adapter (B&H #HOYCSMF2MMRA) which splits stereo to two individual mono outputs. Again, I do want to mention that we have not tested this setup to confirm whether it will work properly or if it will sound good. We recommend connecting the mic to a 3.5mm TRS input for the proper stereo imaging it was designed to create.

Q: 3. Can someone confirm that this cable splits the right channel and the left channel? I'm thinking it might go well with the Deity Microphone V-Mic D4 duo on and ENG type camera such as the Sony FS5.

A: Yes. This cable will split the left and right on the 3.5mm to seperate male XLR conectors.

Q: 4. Will this work with the Comica Audio CVM-WM200A 2-Person Camera-Mount Wireless Omni Lavalier Microphone System?

A: Yes, this Saramonic cable will work with the Comica Audio CVM-WM200A wireless system.

Q: 5. Would this work with the Rode VideoMic NTG TRRS output (allowing you to record the signal in addition to the safety track separately) with any mixer with XLR inputs?

A: The adapter has a female 3.5mm TRS connector, so to avoid the possibility of any issues with compatibility, it would be better to use a TRS cable instead of the TRRS cable since the auto-sensing feature may not work properly when connecting to an adapter rather than directly to a mic input. For a standard TRS cable, you could use the Rode SC2 Right-Angle 3.5mm TRS Coiled Patch Cable (B&H # ROSC2). As an easier solution, you can use a single Y-cable with 3.5mm TRS and left/right XLR connectors like the Kopul Y-Cable with 1/8" TRS Stereo Mini to 2 XLR Male Connectors - 3' (B&H # KOSMYCM2XM03) or Hosa Technology Pro Stereo Breakout Cable - 3.5mm Stereo Mini to Dual 3-Pin XLR Male - 3' (B&H # HOHMX003Y) or Hosa Technology Stereo Mini-Phone (3.5mm) Male to 2 XLR Male Y-Cable - 6.6' (B&H # HOYCSMM2XM6). All of the Y-cables are available in longer lengths. The single Y-cable ensures a proper left/right split and helps to avoid introducing noise into the signal.

Q: 6. This will connect to my Sennheiser G3 lav mic to my iPad Pro USBC port, but will the iPad recognize it?

A: Yes, the Saramonic 3.5mm Locking Male to USB Type-C Converter Cable can be used to connect a Sennheiser G3 Series Wireless Lavalier Microphone System to the USB-C port on an iPad Pro and the iPad should recognize it as an external microphone.

Q: 7. Will this work with iPad Airs with USB-C connector?

A: Yes, the Comica Audio Locking 3.5mm TRS Male to USB Type-C Adapter Cable for Wireless Receiver to Android is compatible for use with an iPad Air that has a USB-C connector.

Q: 8. The overview says, "This allows you to play back your computer's audio over your home audio system," but few (if any) stereos have a "mic input," they are all line-level inputs (from CD player, tuner, tape, home theater processor, etc.). Does output from the LSP-1 need to go through a microphone preamp before connecting to a home stereo system? Thank you for your help!

A: This unit is designed to allow you to connect any audio source with a line level, 3.5mm jack style, output to a mic preamp on a mixer. The output must be connected to a mic preamp to playback at a listenable level.

Q: 9. Could this be used between a Sennheiser g3 and a Samsung galaxy tab s5e?

A: No, the Senheiser has a different wiring on the output.

Q: 10. Is this passive? i.e. Can I use the XLR as an input and the 3.5mm as an output?

A: This will not act as a USB interface and will only route the audio signal in one direction.