Kramer Bnc Male Rg-6 Coax Video Cable 1.5 Ft

Product Code: eq174018
Availability: In Stock

$19.20 $25.73

Qty

10 reviews Write a review

Description
Reviews (10)

This 1.5 ft Kramer BNC Male RG-6 Coax Video Cable 1.5 ftfrom Kramer BNC Male RG-6 Coax Video Cable 1.5 ftfeatures 75Ω BNC male connectors that support all analog and digital BNC signals up to 3G HD-SDI. The cable consists of an 18 AWG solid bare copper center, skin foam insulation, and braid aluminum and dual aluminum Mylar foil dual shielding. The outside jacket is dark gray.

1-BNC Male to 1-BNC Male, 75Ω 18AWG Solid Bare Copper Center Conductor Dual Shield: 61% Braid / Dual Mylar Foil Skin Foam Dielectric Low Attenuation / 100 ft: -0.3dB @ 1MHz Supports Signals Up to 3G HD-SDI Dark Gray Outside Jacket

General
Connector 1	1x BNC Male
Connector 2	1x BNC Male
Coaxial Type	RG-6
Interface	3G-SDI
Maximum Resolution Support	1920 x 1080
SMPTE Standards	Not Specified by Manufacturer
Environmental
Certifications	RoHS
Operating Temperature	-4 to 167°F / -20 to 75°C
Physical
Conductor Material	Bare Copper
Insulation Type	Skin Foam
Jacket Type	Polyvinyl Chloride (PVC)
Outer Diameter	0.273" / 6.95 mm
Shielded	Yes
Wire Gauge	18 AWG
Packaging Info
Package Weight	0.13 lb
Box Dimensions (LxWxH)	7.5 x 5 x 0.8"

−0.3dB @ 1MHz
−0.6dB @ 5MHz
−0.8dB @ 10MHz
−1.6dB @ 50MHz
−2.0dB @ 100MHz
−2.8dB @ 180MHz
−4.4dB @ 400MHz
−5.7dB @ 750MHz
−6.7dB @ 1000MHz

Related Questions and Answers

Q: 1. Can this be used on older DP3M?

A: Thank you for your interest in Sigma products. The Conversion Lens FT-1201 is only compatible with the DP3 Quattro. It is not compatible with the DP3 Merrill.

Q: 2. Using a Panasonic AG HVX200 to an Intensity Pro 4K capsure card into Wirecast. When I plug in this cable I get a green image in Wirecast. Seems like the red is missing. Any ideas?

A: Double check that the RCA RGBs are plugged in to the correct input. Any lack of contact on that end of this will show up as the wrong colors.

Q: 3. How works doing tethering with Capture One or Lightroom sending RAW files?

A: Tethered support with the FUJIFILM FT-XH File Transmitter Grip is going to be limited. Adobe Lightroom does not support tethered shooting with any Fujifilm cameras, only immediate import once shot. Capture One Pro 22 does not currently support wireless tethering with any Fujifilm cameras, it would be only wired support.

Q: 4. i would like to use this cable with canon XH-A1, but does it offer 1080i output ?

A: yes,i'm using it in 1080i,and converting it to SDI signal via blackmagic miniconverter analog to SDI

Q: 5. What is the power supply for this? I am researching the image for low light insect photography. What does the image look like?

A: We currently don't have any sample of the footage taken from the camera. It is possible for it to be found online. The following is the power supply recommended be Marshall Electronics.

Q: 6. i was hoping there was an audio output on this cable but no in fact, i m only getting a mon audio signal with my xh a1, somebody knows how to get a stero output ?(i m using 1 xlr microphone)

A: try a stereo mini jack

Q: 7. Does this grip have a 1/4-20 thread on the long side to support it being used on a cinema rig?

A: FUJIFILM FT-XH File Transmitter Grip has on the bottom a standard tripod 1/4 female thread.

Q: 8. Will this D-Terminal to Component cable replace the Canon DTC-1500 cable that comes with the Canon xf-300 Camcorder?

A: I cannot speak to your specific camera- however a d-terminal is a d-terminal and mine was for a canon XH-A1 so it is very likely it will work.

Q: 9. What is the operational humidity range for this?

A: The environmental humidity for the Marshall Electronics V-1055BNC 1/3-Inch CCD is listed as within 95% relative humidity. Additionally, the operating temperature is -20C to +55C or -4F to +131F.

Q: 10. Cable length?

A: The following cable is a 9ft cable or 3 meters.

Silo	22/09/2024
[1920 x 1080] Works great. Can't beat for the price. 5

Tim	03/09/2024
[1x BNC Male] this cable feels substantial but is flexible enough to coil up and un-coil easily. Great value for the money. 5

Mark	09/06/2024
[0.13 lb] just what we needed for initial setup of our PTZOptics 30X-SDI 5

Josephine	04/06/2024
[Skin Foam] Using the Kramer 6 ft. cable for a short connection between a studio rack and a converter. Works as it should. 5

Steffan	22/05/2024
[Bare Copper] I use this to connect a camera to the ATEM Television Studio. Works fine and it's inexpensive. 5

Br. Lawrence	12/05/2024
[Yes] I wanted to be able to use timecode to sync the Ursa Mini Pro with the Zoom F8n recorder and the BMPCC 4K, without having to buy an external sync box. This cable allowed me to jam the F8n with the Ursa Mini Pro, which then kept time very well for over an hour. I haven't tested the sync beyond that, but Blackmagic claims that the timecode in the Ursa shouldn't drift by more than a frame over 8 hours. I was happy to be able to do all this without the expense of one or more sync boxes. 5

Terence	22/04/2024
[1x BNC Male] So far the sdi cables are fantastic solid connections 5

William	12/04/2024
[1x BNC Male] As others noted it is a bit stiff but considering the cable has a solid center conductor it was expected. Overall a good value and just took a extra few minutes to 'un-train' the cable from being in a coil. Rolled it out carefully and then installed it. Connections seem solid and picture quality was as expected and no difference from another cable we had installed in another location. Will be back for our next camera as well. 5

Mark	06/04/2024
[1x BNC Male] Needed to set up a new PTZ camera system in our sanctuary and these got the job done easily. Nice quality! 5

nick	05/04/2024
[Bare Copper] Beefy, solid design. Comes in a tight coil, but after laying it all out and taking that memory out it coiled up nice into about an 18 loop. Solid siignal over the 100' length, great solid connection. Loved the dark grey look so I don't get mine knicked by a production house or facility 5