This 1500 ft Camplex SMPTE Hybrid FMW/PUW LEMO Fiber Cable 1500ftfrom Camplex SMPTE Hybrid FMW/PUW LEMO Fiber Cable 1500ftis a cable-mount, camera-to-CCU connection cable combining optical, electrical, and control signal paths. It features a round flange FMW LEMO connector and round socket PUW LEMO connector. It uses a Belden CMR Riser Rated indoor cable suitable for permanent installations in building risers. All assemblies are tested for < -55dB return loss, exceeding SMPTE 304M/311M standards. Diagnostics documentation is provided with each cable.

This cable is standardized by SMPTE for HDTV broadcast camera use. It supports 19.4 Mbps to 3 Gbps bandwidths.

SMPTE Standard HDTV Broadcast Cable    Camera-to-CCU Connection Cable    Optical, Electrical, and Control Paths    FMW Round Flange / PUW Round Socket    Belden Riser Rated Indoor Cable    Tested for < -55dB Return Loss    19.4 Mbps to 3 Gbps Bandwidth    Diagnostics Documentation Provided

• Cable-mount, camera-to-CCU connection cable
• Combines optical, electrical, and control signal paths
• Round flange FMW LEMO connector and round socket PUW LEMO connector
• Belden CMR Riser Rated indoor cable assembly
• Suitable for permanent installations in building risers
• Tested for < -55dB return loss (diagnostics documentation provided)

• Terminated by LEMO trained technicians
• LEMO certified, multi-stage machine polished fiber contacts
• Electrical assemblies 100% tested for continuity and shorts
• Fiber optic assemblies 100% tested for attenuation and back reflection
• Stainless steel assemblies
• Rubber dust caps
• 19.4 Mbps to 3 Gbps bandwidth

Related Questions and Answers

Q: 1. Will the flex shooter mini or pro fit better with this Apex?

A: Flex shooter mini or pro will both work well on FLM CP30-M5 Hybrid Series II Tripod. If you have a heavy and long lens like the Nikon AF-S 800mm 5.6 lens I would recommend the Pro and if you have a lighter and smaller Sony 200-600 6.3 lens I would recommend the Mini.

Q: 2. How does this system work with mounting a larger camera system to it (like an URSA Pro)? Will it work?

A: The device has a 15mm Rod Support system included. Rather than mounting a large camera to this system, you could mount this system to the rigging you have for your Ursa Mini Pro just as long as that rigging has 15mm Rods. For example you should be able to rig this up to to B&H # CAMEURSAMIN2. https://bhpho.to/2jEyTgb

Q: 3. Is there a transport case for this? I see one in the promotional pictures.

A: The Blackmagic Design SmartView 4K G3 15.6" DCI 4K Broadcast Monitor with SMPTE 2110 does not have its own specific transport case, but any case that will accommodate the dimensions of 18.98 x 10.47 x 2.75" / 48.21 x 26.59 x 6.96 cm will suffice in this situation. The case in the image is hypothetical.

Q: 4. Does this come with a case?

A: Yes, the Glide Gear Face-2-Face Interview Periscope & Teleprompter Hybrid comes with included carry case.

Q: 5. What's the maximum size iPad it will take? My iPad Pro is 8.75 x 11....

A: The Glide Gear Face-2-Face Interview Periscope & Teleprompter Hybrid can support devices measuring between 3 and 9".

Q: 6. Could this be connected to a Zeus Intercom matrix?

A: B&H does not support the Zeus Intercom matrix and I am unable to definitively answer your question. However, I am able to advise you in general. Intercom systems, though many have 3 pin XLR connectors for audio, are actually wired differently and have 30V running down the cable. Connecting from an intercom's loop-thru may be detrimental as this signal can potentially burn out an audio device such as the JK Audio Host. Some intercom systems provide a standard analog audio out. If the Zeus intercom matrix falls in this category, you may connect it to the JK Audio broadcast Host.

Q: 7. What ballhead (Arca compatible) do you recommend for this? I'm usually mounting Fuji X-T3and 70-300.

A: There are a boatload of great choices that'll work for you, your X-T3 + 70-300 and the CP30-M5 tripod! Here are some good options: https://bhpho.to/3BnYBc6 https://bhpho.to/3BmNfVK https://bhpho.to/3wrf5Pm (comes with arca-swiss QR plate)

Q: 8. How does this unit transport? Are tools required to partially assemble/breakdown? Product highlights says carry case included, but none is shown.

A: We do not see this breaking down and would go with the idea that the carrying case will be adequate for it's purpose.

Q: 9. I was able recently to compare the sound of my Broadcast Host with a 20+ year-old Telos One hybrid and was astounded by how much less noise the ancient Telos had compared to my JK Audio unit. Am I doing something wrong with my BH? Are there settings I don't know about that adjust the noise suppression or whatever? This unit is more advanced so I'm sure it's operator error.

A: Telos is a professional broadcast supplier of telephone hybrids. The Telos One units were broadcast, very high quality devices, they adjusted the quality of analog audio, based on the POTS ("Plain Old Telephone Service") telephone line being used for that exact call. Currently, the telephone lines are often digital lines or sometimes a combination of analog and digital and often are carried over internet service providers. Using Audio Over Internet Provider (AOIP). There are several companies/ products which address these phone line differences. These include the JK Innkeeper, Comrex and Telos products (the latter 2 being Broadcast level).

Q: 10. can I use the RRS BH-55 or Robus RTH-1050 with the FLM CP30-M5 Hybrid tripod?

A: Yes RRS BH-55 or Robus RTH-1050 do fit the FLM CP30-M5 Hybrid tripod.