This 1500 ft Camplex SMPTE Hybrid FUW/PUW LEMO Gepco Fiber Cablefrom Camplex SMPTE Hybrid FUW/PUW LEMO Gepco Fiber Cableis a cable-mount, camera-to-CCU connection cable combining optical, electrical, and control signal paths. It features an FUW LEMO connector and round socket PUW LEMO connector. It uses an extra-flexible, Gepco, 9.2mm, harsh environment outside broadcast cable designed to US SMPTE standards. All assemblies are tested for < -55dB return loss, exceeding SMPTE 304M/311M standards. Diagnostics documentation is provided with each cable.

This cable is standardized by SMPTE for HDTV broadcast camera use. It supports 19.4 Mbps to 3 Gbps bandwidths.

SMPTE Standard HDTV Broadcast Cable    Camera-to-CCU Connection Cable    Optical, Electrical, and Control Paths    FUW LEMO / Round Socket PUW LEMO    Gepco Harsh Environment Outside Cable    Tested for < -55dB Return Loss    19.4 Mbps to 3 Gbps Bandwidth    Diagnostics Documentation Provided

• Cable-mount, camera-to-CCU connection cable
• Combines optical, electrical, and control signal paths
• FUW LEMO connector and round socket PUW LEMO connector
• Gepco harsh environment outdoor cable assembly
• Tested for < -55dB return loss (diagnostics documentation provided)

• Terminated by LEMO trained technicians
• LEMO certified, multi-stage machine polished fiber contacts
• Electrical assemblies 100% tested for continuity and shorts
• Fiber optic assemblies 100% tested for attenuation and back reflection
• Stainless steel assemblies
• Rubber dust caps
• 19.4 Mbps to 3 Gbps bandwidth

Related Questions and Answers

Q: 1. What ballhead (Arca compatible) do you recommend for this? I'm usually mounting Fuji X-T3and 70-300.

A: There are a boatload of great choices that'll work for you, your X-T3 + 70-300 and the CP30-M5 tripod! Here are some good options: https://bhpho.to/3BnYBc6 https://bhpho.to/3BmNfVK https://bhpho.to/3wrf5Pm (comes with arca-swiss QR plate)

Q: 2. There is some incomplete information on both the listing and the Q&A. Can you please provide the full maximum dimensions of supported devices? i.e Width x Height?

A: Hopefully this will solve and make this question more clear. The Glide Gear Face-2-Face Interview Periscope is compatible with phone and tablets with a width no greater than 18 cm or 7 inches.

Q: 3. How does this compare to the eye direct?

A: It's a decent option for an inexpensive system, but the Eyedirect system is an entirely different level of craftsmanship and design. Both have their own levels and if your project is simple and you're looking to stay within a conservative budget, then the Glide Gear will be a decent choice.

Q: 4. Could this be connected to a Zeus Intercom matrix?

A: B&H does not support the Zeus Intercom matrix and I am unable to definitively answer your question. However, I am able to advise you in general. Intercom systems, though many have 3 pin XLR connectors for audio, are actually wired differently and have 30V running down the cable. Connecting from an intercom's loop-thru may be detrimental as this signal can potentially burn out an audio device such as the JK Audio Host. Some intercom systems provide a standard analog audio out. If the Zeus intercom matrix falls in this category, you may connect it to the JK Audio broadcast Host.

Q: 5. Will the larger iPad Pro 12.9" work with this unit when using it as a teleprompter?

A: The Glide Gear Face-2-Face Interview Periscope & Teleprompter Hybrid supports mobile devices measuring between 3 and 9" wide when you hold them in portrait mode.

Q: 6. Is it waterproof?

A: The FLM CP30-M5 is not fully waterproof, but can be used in shallower depths without issues. Regular maintenance and cleaning/rinsing to remove sediments are recommended if submersed or if used in saltwater.

Q: 7. Is there a mirror flip option for using in a teleprompter?

A: The Blackmagic Design SmartView 4K G3 15.6" DCI 4K Broadcast Monitor with SMPTE 2110 does not have a mirror flip option at this time.

Q: 8. Does this fit the SL2S?

A: Yes it would fit the SL2S

Q: 9. How does this system work with mounting a larger camera system to it (like an URSA Pro)? Will it work?

A: The device has a 15mm Rod Support system included. Rather than mounting a large camera to this system, you could mount this system to the rigging you have for your Ursa Mini Pro just as long as that rigging has 15mm Rods. For example you should be able to rig this up to to B&H # CAMEURSAMIN2. https://bhpho.to/2jEyTgb

Q: 10. Can it be used with the interviewer sitting on both the operator and dumb side of the camera?

A: This is meant for the interviewer to be on the right or dumb side. It would require extensive, warranty-voiding modification by the user to work the opposite way.