The Eve Audio SC3012 - 12" Active Main Monitorfrom Eve Audio SC3012 - 12" Active Main Monitoris a three-way active main monitor designed for recording and mastering studios, film and television post-production facilities, cinema applications and in-wall installations. Equipped with three amplifiers--which combine for a short-term total output of 1000W to power its 12" woofer, 5" mid-range driver and AMT RS6 tweeter--the SC3012 is designed to offer maximum headroom with minimal distortion.

To increase efficiency, the SC3012's custom-made 12" SilverCone woofer provides bass frequency response down to 25 Hz, while the 5" mid-range driver extends up through 1800 Hz. The SC3012 also makes use of the proprietary AMT RS6 HF driver, which uses a large front plate and internal magnet to drive the tweeter with greater efficiency.

For flexible positioning, the silver module located in the middle of the speaker that houses the mid-range woofer and the tweeter can be rotated 90-degrees, allowing the speakers to be positioned either horizontally or vertically. This helps to preserve control room sight lines and may further optimize acoustic performance.

The SC3012 also features both balanced XLR inputs and unbalanced RCA inputs for flexible connectivity, and a selector knob on the front that gives access to volume control and filter settings to help you tailor your monitors to the way you work.

12" Woofer    5" Mid-Range Driver    AMT RS6 Tweeter    Tri-Amped Design    DSP Based Filters and Volume Control    24-Bit/192 kHz Burr-Brown A/D Converter    Bass Port Design    XLR and RCA Input Connectors    Limiter For Speaker Protection

One push knob operation gives access to DSP-based volume control and filter settings via high quality A/D converter (24bit/192 kHz) from Burr-Brown

Large rear rectangular port with no hard edges for high efficiency on lower frequencies

Related Questions and Answers

Q: 1. Is this D2 version?

A: No. The M-Audio BX5 D2 Active 70W 5" 2-Way Studio Monitor Speaker - Pair (B&H # MABX5D2) is a discontinued model. The M-Audio BX5 Graphite 5" 100W Active Studio Monitor is a newer model which is single active studio monitor with updated features and more power.

Q: 2. Can i use with focusrite scarlett solo interface?

A: The speakers have a standard RCA stereo line input and are self-powered. So, they will work with anything that can provide a line output. That would include the focusrite scarlett solo.

Q: 3. what is the ohm ratings for these speakers?

A: The input impedance rating for the Adam Professional Audio T8V T-Series Active Nearfield Monitor is listed as 10 kOhm / 20 kOhm.

Q: 4. are these 110v?

A: Yes

Q: 5. Hi, what is the wattage/ power consumption please? Thank you!

A: 0.28 A at 120 VAC/60Hz

Q: 6. Are the woofer surrounds foam or butyl rubber? Has anyone found a pro review of these FX50 speakers?

A: Fluid Audio does not indicate what material the cone is held in place with, but, when you zoom in on the images is looks like foam. There are links to a few reviews on Fluid's website: https://www.fluidaudio.com/reviews

Q: 7. do each of the pair of speakers need do be connected to the computer by individual USBs in order to have remote access?

A: They do not. There is an XLR AES3 output is provided to route digital signal to the second monitor, necessary for correct digital signal flow.

Q: 8. Can I use it as desktop speakers?

A: Yes. These will work on a desktop. Isolation pads are usually a good option to ensure the desk does not resonate with the speakers. I would recommend using an audio interface for the best sound out of a computer, but a cable like this can be a less costly solution to output sound from a computer: https://bhpho.to/3yudNDe

Q: 9. Can you send a program/aux feed from an audio board to the xlr inputs of the Telex MS-4002?

A: Yes. You can connect any line-level audio source to the XLR inputs on the Telex MS-4002 4-Channel Main Station for monitoring in the speaker or headset, or for routing to the intercom channel. The program audio to the channel can be set to interrupt while the MS-4002 operator is talking on the channel.

Q: 10. Is this the thread enabled version?

A: Yes, the Eve Indoor Air Quality Monitor with Apple Homekit Technology BH #EVEROOM integrates with Thread technology. Eve already offers the world’s largest portfolio of accessories that support HomeKit over Thread – and it’s a family that continues to grow, with our Bluetooth-based devices soon to be enhanced with Thread technology. That’s because Thread not only makes your smart home more responsive and robust – it’s also one of the pillars of the smart home of the future. Thread technology is specifically developed for smart home applications to improve connectivity between accessories. Now, HomeKit products can communicate not only using Wi-Fi or Bluetooth, but also using Thread.