This 164 ft Camplex SMPTE Hybrid FMW/PBW LEMO Fiber Cable 164ftfrom Camplex SMPTE Hybrid FMW/PBW LEMO Fiber Cable 164ftis a chassis-mount interconnect cable combining optical, electrical, and control signal paths. It features a round flange FMW LEMO connector and square flange PBW LEMO connector. It uses a Belden CMR Riser Rated indoor cable suitable for permanent installations in building risers. All assemblies are tested for < -55dB return loss, exceeding SMPTE 304M/311M standards. Diagnostics documentation is provided with each cable.

This cable is standardized by SMPTE for HDTV broadcast camera use. It supports 19.4 Mbps to 3 Gbps bandwidths.

SMPTE Chassis-Mount Interconnect Cable    Optical, Electrical, and Control Paths    FMW Round Flange / PBW Square Flange    Belden Riser Rated Indoor Cable Assembly    Tested for < -55dB Return Loss    19.4 Mbps to 3 Gbps Bandwidth    Diagnostics Documentation Provided

• Chassis-mount interconnect cable
• Combines optical, electrical, and control signal paths
• Round flange FMW LEMO connector and square flange PBW LEMO connector
• Belden CMR Riser Rated indoor cable assembly
• Suitable for permanent installations in building risers
• Tested for < -55dB return loss (diagnostics documentation provided)

• Terminated by LEMO trained technicians
• LEMO certified, multi-stage machine polished fiber contacts
• Electrical assemblies 100% tested for continuity and shorts
• Fiber optic assemblies 100% tested for attenuation and back reflection
• Stainless steel assemblies
• Rubber dust caps
• 19.4 Mbps to 3 Gbps bandwidth

Related Questions and Answers

Q: 1. Is this mostly plastic or metal? Does it lock well and hold firmly?

A: Hi This item is made of plastic and metal.Ideal for car-mounted shooting, tabletop and product imaging as well as miniature work.1. for tube size dia. 10 mm2. for tube size dia. 10 mm3. for tube size dia. 13 mm4. 16 mm hex bady pin w/3/8 -16 female thread.I hope this helps.Regards,Will HBrand Manager Lighting

Q: 2. Is there a transport case for this? I see one in the promotional pictures.

A: The Blackmagic Design SmartView 4K G3 15.6" DCI 4K Broadcast Monitor with SMPTE 2110 does not have its own specific transport case, but any case that will accommodate the dimensions of 18.98 x 10.47 x 2.75" / 48.21 x 26.59 x 6.96 cm will suffice in this situation. The case in the image is hypothetical.

Q: 3. How does this system work with mounting a larger camera system to it (like an URSA Pro)? Will it work?

A: The device has a 15mm Rod Support system included. Rather than mounting a large camera to this system, you could mount this system to the rigging you have for your Ursa Mini Pro just as long as that rigging has 15mm Rods. For example you should be able to rig this up to to B&H # CAMEURSAMIN2. https://bhpho.to/2jEyTgb

Q: 4. What's the maximum size iPad it will take? My iPad Pro is 8.75 x 11....

A: The Glide Gear Face-2-Face Interview Periscope & Teleprompter Hybrid can support devices measuring between 3 and 9".

Q: 5. How does this compare to the eye direct?

A: It's a decent option for an inexpensive system, but the Eyedirect system is an entirely different level of craftsmanship and design. Both have their own levels and if your project is simple and you're looking to stay within a conservative budget, then the Glide Gear will be a decent choice.

Q: 6. Is there a mirror flip option for using in a teleprompter?

A: The Blackmagic Design SmartView 4K G3 15.6" DCI 4K Broadcast Monitor with SMPTE 2110 does not have a mirror flip option at this time.

Q: 7. There is some incomplete information on both the listing and the Q&A. Can you please provide the full maximum dimensions of supported devices? i.e Width x Height?

A: Hopefully this will solve and make this question more clear. The Glide Gear Face-2-Face Interview Periscope is compatible with phone and tablets with a width no greater than 18 cm or 7 inches.

Q: 8. The manual says one side of the mirror glass should have a yellow sticker. My unit has no yellow sticker but does have a small sticker that says "reverse side". No clue what that means. How else can I identify which side of the mirror glass should face toward the subject?

A: The Glide Gear Face-2-Face Interview Periscope & Teleprompter Hybrid's beam splitter glass(the one way mirror) should be one directional, allowing the camera to see through one side while the other is reflective. The reflective side should be faced out towards the subject.

Q: 9. Could this be connected to a Zeus Intercom matrix?

A: B&H does not support the Zeus Intercom matrix and I am unable to definitively answer your question. However, I am able to advise you in general. Intercom systems, though many have 3 pin XLR connectors for audio, are actually wired differently and have 30V running down the cable. Connecting from an intercom's loop-thru may be detrimental as this signal can potentially burn out an audio device such as the JK Audio Host. Some intercom systems provide a standard analog audio out. If the Zeus intercom matrix falls in this category, you may connect it to the JK Audio broadcast Host.

Q: 10. Specifically, does this work with an iPhone?

A: No.