This 100 ft SMPTE Hybrid opticalCON DUO to PUW LEMO Fiber Cable Reel 100ftfrom SMPTE Hybrid opticalCON DUO to PUW LEMO Fiber Cable Reel 100ftis a SMPTE 311M compliant broadcast interconnect cable with a heavy duty tactical reel. It features a Neutrik OpticalCON DUO NO2SX connector and PUW LEMO connector. The OpticalCON connector is COCA factory terminated and interferometrically tested to GR-326-CORE endface standards. It has common LC contacts and a mechanical shutter system that shields against endface contamination. The cable is tested for < -55dB typical return and comes with diagnostics documentation. The reel includes a side reel flange.

The opticalCON connectors are assembled using the Neutrik opticalCON ADVANCED system, which adds lockable, waterproof metal caps and rubber guards, especially critical for outdoor applications. This improves the cable protection and water resistance in long-term use.

311M Compliant Interconnect Cable    Heavy Duty Reel with Side Flange    OpticalCON DUO NO2SX / PUW LEMO    COCA Factory Terminated    GR-326-CORE Endface Standards    Neutrik opticalCON ADVANCED System    Tested for < -55dB Return Loss    IP65 Waterproof in Mated Condition    Diagnostics Documentation Provided

• SMPTE 311M compliant interconnect cable
• Heavy duty tactical cable reel with side reel flange
• COCA factory terminated OpticalCON DUO NO2SX connector, tested to GR-326-CORE endface standards
• PUW LEMO connector
• Tested for < -55dB typical return loss
• IP65 waterproof in mated condition
• Assembled using the Neutrik opticalCON ADVANCED system
• Two channel fiber optic connection system

• Overall copper braided shield and stainless steel strength member
• Suitable for indoor camera links considering specific conditions according to IEC 60664-1
• Machine polished and tested end faces
• Tactical tight buffered PUR cable
• Supports standard optical LC-Duplex connectors
• All metal housing cable connector with heavy duty cable retention
• Automatic sealing shutter with silicone gasket for dust and dirt protection
• Push/Pull locking mechanism
• No tools required to clean

Related Questions and Answers

Q: 1. how long does it take to fill up the entire tank with chemistry? i believe 5rolls of 135 would require 1500ml of it. do you need to compensate for time to avoid over develop negatives in the bottom?

A: It's only a matter of 10-15 seconds. I compensate about 5 seconds and have never had issues! I've never directly measured how much chemistry, but use a 2L kit and life is easy. I would guess its more around 1600ml!!

Q: 2. Can you use two MOD54's in this tank?

A: Yes, you could fit two MOD54s in the Multi Reel 8 tank.

Q: 3. Does this kit come with any reels, or must they be purchased separately?

A: You have to purchase separately.

Q: 4. where does b & h offer reels to accommodate this purchase, since it does not come with reels?

A: Here is the reels you need for the developing tank. You can get 2 reels for 120 film or 3 for 35mm to fill the tank. The reels are expandable so they can accommodate both film types.

Q: 5. How many ounces does this hold when full?

A: The tank requires 10oz (290ml) per 35mm roll of film. The tank can hold 5 rolls of 35mm film so it would require 50oz (1,450ml). The tank can also hold 3 rolls of 120/220 film that requires 17oz (500ml) per roll, so that is 51oz (1,500ml) for 3 rolls of 120/220 film.

Q: 6. How many millilitres does it take to fill the Multi-Reel 8 Tank?

A: The standard rule of thumb is 10 oz (300 ml) for each 35 mm plastic reel, or 2400 ml or 80 oz. It's a good idea to add a little more chemistry than that. Even if you have 7 rolls of film, you must add the 8th reel and the chemistry to reflect 8 reels to make sure no light leaks in the gap.Or, you may use 5 rolls of 120 film to fill this tank. Each reel requires 500 ml (17 oz), for 5 rolls 2.5 liters (85 oz). Any other combination of 120 and 35: before loading, stack your reels and make sure the funnel locks in place. If too high, the funnel won't lock in place. Don't do it. You won't have a tight seal and you will leak light and fog your film, or worse.

Q: 7. Does this include a funnel and agitation tube?

A: It comes with a Paterson 35mm Tank with Reel (Super System 4) and a 35mm plastic reel. A funnel and agitation tube are not included.

Q: 8. Is it necessary to fill up the whole tank with chemicals even if you're developing only 1 or 2 rolls ? I understand that empty reels should still be stacked up to prevent the loaded reel to move too much but still need to be sure if the less than full tank affects developing in a bad way ?

A: No it's not, below the tank you can find the specific volume for each number or reels either 120 or 35mm, just make sure as you said the empty reels are stacked above to prevent it does not get chemicals.

Q: 9. how many exposures can fit on a reel?

A: The most it will handle is a 36 exposures of a 35 mm film! No medium format

Q: 10. How many ounces does this hold with 2 reels?

A: The tank holds 33.8oz (1L) with room or a bit more. 35mm x2: 20oz120 x2: 35oz