This 50 ft Camplex SMPTE Hybrid FMW/PUW LEMO Fiber Cable 50ftfrom Camplex SMPTE Hybrid FMW/PUW LEMO Fiber Cable 50ftis a cable-mount, camera-to-CCU connection cable combining optical, electrical, and control signal paths. It features a round flange FMW LEMO connector and round socket PUW LEMO connector. It uses a Belden CMR Riser Rated indoor cable suitable for permanent installations in building risers. All assemblies are tested for < -55dB return loss, exceeding SMPTE 304M/311M standards. Diagnostics documentation is provided with each cable.

This cable is standardized by SMPTE for HDTV broadcast camera use. It supports 19.4 Mbps to 3 Gbps bandwidths.

SMPTE Standard HDTV Broadcast Cable    Camera-to-CCU Connection Cable    Optical, Electrical, and Control Paths    FMW Round Flange / PUW Round Socket    Belden Riser Rated Indoor Cable    Tested for < -55dB Return Loss    19.4 Mbps to 3 Gbps Bandwidth    Diagnostics Documentation Provided

• Cable-mount, camera-to-CCU connection cable
• Combines optical, electrical, and control signal paths
• Round flange FMW LEMO connector and round socket PUW LEMO connector
• Belden CMR Riser Rated indoor cable assembly
• Suitable for permanent installations in building risers
• Tested for < -55dB return loss (diagnostics documentation provided)

• Terminated by LEMO trained technicians
• LEMO certified, multi-stage machine polished fiber contacts
• Electrical assemblies 100% tested for continuity and shorts
• Fiber optic assemblies 100% tested for attenuation and back reflection
• Stainless steel assemblies
• Rubber dust caps
• 19.4 Mbps to 3 Gbps bandwidth

Related Questions and Answers

Q: 1. How does this unit transport? Are tools required to partially assemble/breakdown? Product highlights says carry case included, but none is shown.

A: We do not see this breaking down and would go with the idea that the carrying case will be adequate for it's purpose.

Q: 2. Could this be connected to a Zeus Intercom matrix?

A: B&H does not support the Zeus Intercom matrix and I am unable to definitively answer your question. However, I am able to advise you in general. Intercom systems, though many have 3 pin XLR connectors for audio, are actually wired differently and have 30V running down the cable. Connecting from an intercom's loop-thru may be detrimental as this signal can potentially burn out an audio device such as the JK Audio Host. Some intercom systems provide a standard analog audio out. If the Zeus intercom matrix falls in this category, you may connect it to the JK Audio broadcast Host.

Q: 3. Is the body metal or plastic?

A: The FUJIFILM INSTAX MINI EVO Hybrid Instant Camera (Brown) is made of plastic.

Q: 4. 1. Is it a glass lens? 2. Can you transfer photos without printing first? 3. How many megapixels is the camera? 4. What size sensor is it? Thanks!

A: The FUJIFILM INSTAX MINI EVO Hybrid Instant Camera does have a glass lens. It will allow you to store images on a Micro SD card prior to printing them. Although Fujifilm doesn't publish the exact megapixels that this camera is capable of, they do mention the number of recorded pixels as 2560 x 1920 from its 1/5 inch CMOS sensor.

Q: 5. Can anyone suggest a lens push-on lens cap for this camera? Some people say a 50mm lens cap might work but wasn't sure. Would the Kaiser 50mm Push-On Lens Cap fit on this camera? Please advise, thanks

A: lens outer diameter is not provide by the manufacture. I sent an email to FUJIFILM.

Q: 6. Will the larger iPad Pro 12.9" work with this unit when using it as a teleprompter?

A: The Glide Gear Face-2-Face Interview Periscope & Teleprompter Hybrid supports mobile devices measuring between 3 and 9" wide when you hold them in portrait mode.

Q: 7. Can it be used with the interviewer sitting on both the operator and dumb side of the camera?

A: This is meant for the interviewer to be on the right or dumb side. It would require extensive, warranty-voiding modification by the user to work the opposite way.

Q: 8. does it have a tripod mount? the product photos doesn't seem to show all sides.

A: The FUJIFILM INSTAX MINI EVO Hybrid Instant Camera has a standard 1/4"-20 tripod mount on the bottom of the camera.

Q: 9. Can you mount another lens onto this camera?

A: No, the FUJIFILM INSTAX mini evo is a fixed lens camera.

Q: 10. What'd the difference between this new Ex D version and the old one that was listed as "BH #FUIMEBEXD"?

A: The only difference between the recently-announced FUJIFILM Instax Mini Evo Black Ex D Camera 16812493, B&H # FUIMEBEXDC, and the now-discontinued FUJIFILM INSTAX MINI EVO Hybrid Instant Camera, B&H # FUIMEBEXD, is the charging cable and charging port of the INSTAX MINI EVO Hybrid Instant Camera has been changed to a USB Type-C connection from the previously-used USB Type-B connection due to the versatility and power delivery advantages of Type-C and due to it becoming the new market standard for charging cables. Other than the updated USB-C connection port, the cameras are identical.