The JELCO NSATA-YL ATA Projector Shipping Case Y (Grey and Chrome) is a non stock custom made ATA projector case. It is constructed of high-impact ABS plastic over a 1/4" wood frame with a custom-cut 1.5-2.0" industrial-grade foam interior. This rugged shipping case has steel corners, aluminum trim, inter-locking valence, and stainless steel rivets that team up to produce an ultra-strong case that will give years of service.

The NSATA-Y case has a large accessory compartment that holds cords, cables, and a remote control, as well as other necessary items. It is transported by a recessed spring-action handle, a lock-in and lock-out extension handle and built-in tilt wheels. Neoprene bumpers on either side of the handle give important additional protection. This version of the case features a separate compartment in the foam for an unattached lens. Use this as extra protection from shipping damage or for a second lens.

This case is designed to fit various projectors from AVIO, BenQ, Boxlight, Canon, Christie, Eiki, Elmo, Epsom, InFocus, JVC, Mitsubishi, NEC, Optoma, Panasonic, Projector Design, Proxima, Sanyo, Sharp or Sony projectors.

Fits Many Multimedia Projectors    ABS Plastic Laminated over Plywood    Fully Lined with 1.5 -2.0" of Foam    Recessed Butterfly Latches with Lock    Recessed Spring-action Handle    Lock-in and Lock-out Extension Handle    Built-in Tilt Wheels    Separate Compartment for Unattached Lens

• High impact ABS plastic over 1/4" wood frame
• Custom-cut industrial-grade foam
• Steel corners
• Aluminum trim
• Inter-locking valence
• Stainless steel rivets
• Neoprene bumpers for extra protection

ATA-300 style shipping case for multimedia projector and accessories designed for checked luggage or sending via FedEx/UPS

Storage area inside holds cords, cables, remote, etc

Separate compartment cut out of foam for an unattached lens

Recessed butterfly latches with a combination lock

• Recessed spring-action handle
• Lock-in and lock-out extension handle
• Built-in tilt wheels

Sealed wheel housing to exclude water

This is a non-stock case which can be built-to-order with a standard lead-time of shipping 2-4 weeks from the date we receive the order. Please specify exact projector model

Click Here for Compatibility Chart

Related Questions and Answers

Q: 1. Will this fit my 70-200mm 2.8 L IS II USM lens with the ET-87 hood attached backwards?

A: No, it would not. The Canon LP1224 Lens Case B&H # CALP1224 is designed for use with the smaller Canon EF 70-200mm f/4L USM Lens, not for use with the larger Canon EF 70-200mm f/2.8L IS II USM Lens. The interior dimensions of the Canon LP1224 Lens Case are 3.1 x 5.4 . The dimensions of the Canon EF 70-200mm f/2.8L IS II USM Lens by itself (without the lens hood) is approximately 3.5 x 7.8 , much larger than the case's dimensions, not including the lens hood connected to the lens. The Canon LZ1326 Lens Case, B&H # CALZ1326, is the correct case designed for use with (and included with) the Canon EF 70-200mm f/2.8L IS II USM Lens, and would support the lens hood attached in the reversed storage position.

Q: 2. Would this insert fit F-802 Reporter's Satchel Shoulder Bag?

A: Yes.

Q: 3. Which of the dimensions are length, width, and height?

A: The length is 8 inches, the width is 6.5 inches and the height is 7.5 inches.

Q: 4. Are the inner walls on the FA-240 4-Compartment Insert moveable or fixed?

A: Hi Richard, the inserts are totally removable. I have two of these, one I left the insert in for lenses and a flash and the other for an extra camera body. I also move both of them from a large hard case with wheels to a soft shoulder bag when the job calls for it. It's a great system, I only move the units and my gear stays right were I had it. Good luck.

Q: 5. Will 2 of these inserts fit in an F-2?

A: I have the Domke f1x little bit bigger bag with two of these inserts. They fit well. The interior dimensions of the f2 are quite a bit smaller so it's doubtful two will fit.

Q: 6. Will a Canon 50mm 1.2L and 85mm 1.2L II fit side by side in this insert, along with 2 other smaller lenses?

A: It would depend on the additional lenses you are trying to include. I would send an email to photo@bphoto.com and let us know the specific lenses you are trying to accommodate.

Q: 7. Will this fit the Canon 14mm f/2.8 mark II?

A: The Canon 14mm f2.8 Mark 2 lens fits best in the LP1016 case: https://bhpho.to/44lJjnz

Q: 8. will this fit into the think tank retrospective 7 V2 bag. I find the dimensions un-clear as to which is LxWxH and the picture dont really show either?

A: The Domke FA-240 is 8 inches tall, 7.75 wide and 5.5 inches front to back. It would be a tight fit in the Retrospective 7 V2.

Q: 9. interior dividers adjustable?

A: Yes they are adjustable. The are velcrowed so you can organize them any way you would like to fit your equipment.

Q: 10. Can the divider be removed?

A: The divider included with the JELCO JEL-616CB Padded Carry Bag for Projector or Printer (B&H # JEL616CB) may be removed.