The Speco G86 Ceiling Tile Speaker 2x2is a standard 2 x 2' tile size, making its installation simple. The G86 Speaker delivers high-performance sound quality in any setting.

Square-Style White with Steel Grille    70/25V Transformer    Limited Lifetime Warranty

8" speaker combination with transformer & mounted grille

5 oz magnet

5W dual 70/25V transformer (with taps of 5 / 2.5 / 1 / 0.5 / 0.25W & 8 ohms)

Related Questions and Answers

Q: 1. does this model has any rgb function?

A: No, There is a different model that can do RGB, but it's not available yet.

Q: 2. How bright is it? How many lux at 6 feet?

A: This can be found at the bottom of our product page (a href= https://www.intellytechusa.com/products/litecloth-lc-160-led-mat-kit target= _blank https://www.intellytechusa.com/products/litecloth-lc-160-led-mat-kit/a). Attached is a screen shot of the specs.

Q: 3. What is the Carrying Case measurement for single and 2-light kit?

A: The Single Carrying Case measures at 18 x16 x4.5 The Two Light Carrying Case measures in at 21 x14 x11

Q: 4. Does it require the battery for all mic types and does it come with a battery?

A: The Kopul MuteMate 2x2 Momentary Microphone Mute/Talk Switch is a passive switch which does not require a battery to function with any type of microphone. A 3V CR 1220 lithium battery is included with the MuteMate 2x2 and the battery is used only to power the LED indicator light. Since the switch is passive, it will function regardless of whether or not the battery is used.

Q: 5. What is the max amp draw of the LC-160?

A: 160w at 110v is about 1.5 amps.

Q: 6. I will the stream work for this situation I'm in. xlr mic TC-Helicon PerformV 2i2 Focusrite IRIg stream iOS(TikTok, livestream singing)?

A: There are better and simpler options for your setup. After coming out of the TC-Helicon Perform-V, instead of going into the Focusrite 2i2 and then into the iRig Stream (which has an RCA input for line level signal), a better option would be to go from the XLR output of the Perform-V to the XLR mic input of the iRig Pre HD (B&H # IKIRIGPREHD). The Perform-V has a mic level output and the Pre HD has a dedicated mic input and mic preamp. The Pre HD is an interface that will connect to your iOS device in the same manner as the Stream. It's not necessary to use two interfaces, so the 2i2 is not needed in the signal chain and all you will need is the mic, Performer-V, and Pre HD. You would also be able to connect the mic directly to the XLR input of the Pre HD if you do not want to use the Perform-V.

Q: 7. Is there a way to stop the popping noise? It happens every time I mute and unmute myself.

A: After initial setup and the popping noises, I left for a couple of hours and came back, and... no more popping. I emailed Kopul customer support, and they shared the real answer: First, make sure the Mutemate is set to Dynamic mic setting. The Mutemate passes phantom power for condenser mics, so when switching to dynamic from condenser, you need to hold the button down for approx. 30 seconds to dissipate the phantom power stored in unit. Otherwise you will get the popping sound in the first initial uses. So make sure you are set to dynamic, and hold the button down for 30 seconds. This should alleviate any popping. I have a dynamic mic, but I had initially tried this on Condenser mode. That lingering power needed to dissipate before this could work as intended.

Q: 8. SSI??? How about something we can compare, like Lux @ 1m!

A: Here is the info as followed 3200K 1M 6,050 lux / 562 fc 3,940 lux / 366 fc 3,087 lux / 287 fc 3M 706 lux / 66 fc 512 lux / 48 fc 387 lux / 36 fc 5M 21,710 lux / 2,017 fc 13,120 lux / 1,219 fc 10,310 lux / 958 fc

Q: 9. Will this allow me to use an external XLR mic in Zoom? - or - Send a mic level feed to Zoom from a mix board.

A: The iRig Stream is an audio interface that allows you to connect the audio output from a mixer, keyboard, drum machine, or other line level audio to a Mac or Windows computer or to an iOS or Android mobile device. You can connect your microphone to a mixer and then connect the output from the mixer to the RCA input on the iRig Stream. The iRig Stream comes with three cables (USB Type-A, USB Type-C, and Lightning) to enable connection from the iRig's mini-DIN output to your computer or mobile device. It can be used for Zoom meetings.

Q: 10. has anyone used this light? would love some first hand use before I purchase? any problems? how is the colour?

A: The Intellytech LiteCloth LC-160 2 x 2' Foldable LED Mat is a very good option for a lightweight, portable, and foldable light source. It has great color reproduction with a high CRI of 95 and an even higher TLCI of 96. You may click the Reviews link on our website to see reviews from people who have purchased or used the above light fixture.