This 3 ft Kramer BNC Male RG-6 Coax Video Cable 3ftfrom Kramer BNC Male RG-6 Coax Video Cable 3ftfeatures 75Ω BNC male connectors that support all analog and digital BNC signals up to 3G HD-SDI. The cable consists of an 18 AWG solid bare copper center, skin foam insulation, and braid aluminum and dual aluminum Mylar foil dual shielding. The outside jacket is dark gray.

1-BNC Male to 1-BNC Male, 75Ω    18AWG Solid Bare Copper Center Conductor    Dual Shield: 61% Braid / Dual Mylar Foil    Skin Foam Dielectric    Low Attenuation / 100 ft: -0.3dB @ 1MHz    Supports Signals Up to 3G HD-SDI    Dark Gray Outside Jacket

−0.3dB @ 1MHz
−0.6dB @ 5MHz
−0.8dB @ 10MHz
−1.6dB @ 50MHz
−2.0dB @ 100MHz
−2.8dB @ 180MHz
−4.4dB @ 400MHz
−5.7dB @ 750MHz
−6.7dB @ 1000MHz

Related Questions and Answers

Q: 1. Will this canon D-Terminal connect to my Panasonic AG-H VX200 camera?

A: Yes, this will work on the camera's D-connector.

Q: 2. Will this work with the Rode Wireless GO and Samsung Note 10+?

A: Yes, the Saramonic 3,5mm to USB-C cable can be used to connect the Rode Wireless GO system to the Samsung Note 10.

Q: 3. What is the power supply for this? I am researching the image for low light insect photography. What does the image look like?

A: We currently don't have any sample of the footage taken from the camera. It is possible for it to be found online. The following is the power supply recommended be Marshall Electronics.

Q: 4. Using a Panasonic AG HVX200 to an Intensity Pro 4K capsure card into Wirecast. When I plug in this cable I get a green image in Wirecast. Seems like the red is missing. Any ideas?

A: Double check that the RCA RGBs are plugged in to the correct input. Any lack of contact on that end of this will show up as the wrong colors.

Q: 5. will it work with core edge v mount battery?

A: This is not compatible with that battery.

Q: 6. Can I connect it to a power bank with a 12V 2.5mm barrel output?

A: This cable is designed specifically to work Tilta Battery plates that have the needed 2.5mm barrel output such as BH #TIBT003A. We are not aware of how well it might work with non-Tilta products. https://bhpho.to/2Qpm75i

Q: 7. Will this Sarmonic 3.5mm converter work to connect my Sony UWP-V1 wireless mic to Android Samsung S21FE phone? Purpose is to use wireless mic for zoom meetins and general recording.

A: Yes, the Saramonic 3.5mm Locking Male to USB Type-C Converter Cable can be used to connect the output of the Sony URX-P2 Portable Receiver from the UWP-V1 Wireless System to the USB Type-C connection on the Samsung Galaxy S21 FE smart phone for use during Zoom meetings and audio recording.

Q: 8. Will this work with Blackmagic Video Assist 9" with NPA-MQZ1K Multi Battery Adaptor Kit?

A: No, you can not use this with the Blackmagic Video Assist. This cable is meant to be used with the Blackmagic Pocket cameras.

Q: 9. Will this D-Terminal to Component cable replace the Canon DTC-1500 cable that comes with the Canon xf-300 Camcorder?

A: I cannot speak to your specific camera- however a d-terminal is a d-terminal and mine was for a canon XH-A1 so it is very likely it will work.

Q: 10. Could this power a BMPCC 6K G2 from a SmallRig V-Mount adapter plate (#SM3203B)?

A: As the Tilta 2.5mm DC Male Barrel Power Cable for BMPCC 4K (17.2") is a 2.5mm sized barrel which matches the 12V barrel size on the SmallRig V-Mount Battery Adapter Plate with Dual 15mm Rod Clamp, BH #SM3203B, it should be compatible.