Kramer Bnc Male Rg-6 Coax Video Cable 6Ft

Kramer Bnc Male Rg-6 Coax Video Cable 6ft

Product Code: eq174270
Availability: In Stock

$28.80 $36.58

Qty

6 reviews Write a review

Description
Reviews (6)

This 6 ft Kramer BNC Male RG-6 Coax Video Cable 6ftfrom Kramer BNC Male RG-6 Coax Video Cable 6ftfeatures 75Ω BNC male connectors that support all analog and digital BNC signals up to 3G HD-SDI. The cable consists of an 18 AWG solid bare copper center, skin foam insulation, and braid aluminum and dual aluminum Mylar foil dual shielding. The outside jacket is dark gray.

1-BNC Male to 1-BNC Male, 75Ω 18AWG Solid Bare Copper Center Conductor Dual Shield: 61% Braid / Dual Mylar Foil Skin Foam Dielectric Low Attenuation / 100 ft: -0.3dB @ 1MHz Supports Signals Up to 3G HD-SDI Dark Gray Outside Jacket

General
Connector 1	1x BNC Male
Connector 2	1x BNC Male
Coaxial Type	RG-6
Interface	3G-SDI
Maximum Resolution Support	1920 x 1080
SMPTE Standards	Not Specified by Manufacturer
Environmental
Certifications	RoHS
Operating Temperature	-4 to 167°F / -20 to 75°C
Physical
Conductor Material	Bare Copper
Insulation Type	Skin Foam
Jacket Type	Polyvinyl Chloride (PVC)
Outer Diameter	0.273" / 6.95 mm
Shielded	Yes
Wire Gauge	18 AWG
Packaging Info
Package Weight	0.265 lb
Box Dimensions (LxWxH)	6.6 x 6.2 x 1.6"

−0.3dB @ 1MHz
−0.6dB @ 5MHz
−0.8dB @ 10MHz
−1.6dB @ 50MHz
−2.0dB @ 100MHz
−2.8dB @ 180MHz
−4.4dB @ 400MHz
−5.7dB @ 750MHz
−6.7dB @ 1000MHz

Related Questions and Answers

Q: 1. Will this Sarmonic 3.5mm converter work to connect my Sony UWP-V1 wireless mic to Android Samsung S21FE phone? Purpose is to use wireless mic for zoom meetins and general recording.

A: Yes, the Saramonic 3.5mm Locking Male to USB Type-C Converter Cable can be used to connect the output of the Sony URX-P2 Portable Receiver from the UWP-V1 Wireless System to the USB Type-C connection on the Samsung Galaxy S21 FE smart phone for use during Zoom meetings and audio recording.

Q: 2. Does any smartphone (I have the Pixel 3a XL) would recognize a microphone signal being input through the USB terminal?

A: Yes, but it has to be a powered microphone, like a wireless receiver or AA powered mic. Plug-in powered mics will not work with this cable. You may have select external mic in your video or audio app, but most will recognize it as an external mic if you have it connected when you start the app.

Q: 3. Will this D-Terminal to Component cable replace the Canon DTC-1500 cable that comes with the Canon xf-300 Camcorder?

A: I cannot speak to your specific camera- however a d-terminal is a d-terminal and mine was for a canon XH-A1 so it is very likely it will work.

Q: 4. Could this be used between a Sennheiser g3 and a Samsung galaxy tab s5e?

A: No, the Senheiser has a different wiring on the output.

Q: 5. This will connect to my Sennheiser G3 lav mic to my iPad Pro USBC port, but will the iPad recognize it?

A: Yes, the Saramonic 3.5mm Locking Male to USB Type-C Converter Cable can be used to connect a Sennheiser G3 Series Wireless Lavalier Microphone System to the USB-C port on an iPad Pro and the iPad should recognize it as an external microphone.

Q: 6. Does this cable work with the Fujifilm XT3 vertical battery grip?

A: No, the FotodioX Power Adapter Cable - D-Tap Male to 2.1mm Barrel (17.5") would not fit the FUJIFILM VG-XT3 Vertical Battery Grip. The grip does not use that size connector.

Q: 7. Can I connect it to a power bank with a 12V 2.5mm barrel output?

A: This cable is designed specifically to work Tilta Battery plates that have the needed 2.5mm barrel output such as BH #TIBT003A. We are not aware of how well it might work with non-Tilta products. https://bhpho.to/2Qpm75i

Q: 8. Cable length?

A: The following cable is a 9ft cable or 3 meters.

Q: 9. Will this canon D-Terminal connect to my Panasonic AG-H VX200 camera?

A: Yes, this will work on the camera's D-connector.

Q: 10. Will this work with the Dji RS2?

A: The DJI RS2 does not have a 2-pin LEMO port, nor a DC port.

Mark	27/09/2024
[Yes] Needed to set up a new PTZ camera system in our sanctuary and these got the job done easily. Nice quality! 5

Silo	21/09/2024
[1x BNC Male] Works great. Can't beat for the price. 5

Mark	09/08/2024
[1x BNC Male] just what we needed for initial setup of our PTZOptics 30X-SDI 5

nick	22/05/2024
[0.265 lb] Beefy, solid design. Comes in a tight coil, but after laying it all out and taking that memory out it coiled up nice into about an 18 loop. Solid siignal over the 100' length, great solid connection. Loved the dark grey look so I don't get mine knicked by a production house or facility 5

William	16/05/2024
[Bare Copper] As others noted it is a bit stiff but considering the cable has a solid center conductor it was expected. Overall a good value and just took a extra few minutes to 'un-train' the cable from being in a coil. Rolled it out carefully and then installed it. Connections seem solid and picture quality was as expected and no difference from another cable we had installed in another location. Will be back for our next camera as well. 5