The white Yamaha HS8 Studio Monitor White | Single Powered Speakerfrom Yamaha HS8 Studio Monitor White | Single Powered Speakeris a 2-way reference speaker that is designed for mixing and monitoring in your home or studio. Equipped with a 120W bi-amplification system that powers a 8" woofer and a 1" tweeter, the HS8 is designed to offer maximum headroom, minimal distortion, and an extended response up to 30kHz. The HS8 has both an XLR and 1/4" TRS input that accept either balanced or unbalanced signals for maximum flexibility in a variety of studio setups.

120W Total Output    8" Cone Woofer    1" Dome Tweeter    Room Control Response Switch    High Trim    1x XLR Input    1x 1/4" TRS Input    Low Resonance Enclosure

HS Series cabinets are designed to eliminate unwanted resonance and increase the

accuracy of sound reproduction to their extreme limit. The enclosures are constructed from

a dense MDF with a damped acoustic response. HS Series engineers also employed a traditional three-way mitered-joint technique. Common to architectural design, this construction firmly anchors the corners of the enclosure to improve durability and eliminate unwanted resonance that can influence overall sound

Speaker port design can greatly influence the clarity of overall sound. Often a vortex at the either end of the port can generate air vibrations inside of the port, causing unwanted noise. By adopting a noise reduction technology that incorporates an analysis of

a visual representation of the sound, Yamaha's engineers are able to control and reduce the vortex. Through this analysis Yamaha has arrived at a port design that reduces noise up to 6dB

HS Series full-range models feature two response controls with settings that allow them to adapt to the surface acoustics of rooms of varying shape and size. ROOM CONTROL allows you to

attenuate the unnatural, exaggerated low-end that can often occur when speakers are placed

next to walls, while HIGH TRIM allows for more flexible control of high frequency response.

For inputs, HS full-range speakers can accommodate a range of balanced and unbalanced sources such as mixers, keyboards and audio interfaces with XLR and TRS phone jacks

Related Questions and Answers

Q: 1. How much does the background material wrinkle when stored for several weeks?

A: You may experience wrinkling more towards the center of the background as opposed to the sides. Any wrinkles that may occur can easily be removed with a hand held steamer.

Q: 2. if two teachers are in a classroom can they each use a separate microphone with the same unit?

A: The Cetacea Sound ASTRO-CLD001-SFC Astronaut CL Single-Speaker System with Orbiter Wireless Pendant Microphone BH #CEACLD001SFC has a 3-channel mixer with 3.5mm inputs. Each input supports stereo or mono audio signals. This versatility makes it easy to connect a projector, microphone, DVD player, CD player, MP3 player, etc to the speaker. Purchase this system: Two Cetacea Sound Orbiter Pendant microphones may be used in the same space if desired: Cetacea Sound Astronaut CL and Orbiter Commander Duo 40W Voice Amplification System with Two Wireless Microphones and 12' Desktop Power B&H # CEASCLD1OD2D: https://bhpho.to/3G7p1Sy

Q: 3. What color is the back of the Gray one?

A: The Studio Essentials Pop-Up Background Kit (5 x 6.5', Gray) would be gray on both sides; the front is the patterned mottled gray seen in the image, and the back would have a flat, neutral gray color.

Q: 4. Is the bluetooth a reciever or transmitter? If it is a receiver, can you split the stereo signal between the two channel controls? Thanks.

A: The Bluetooth feature on the PA6BT Powered Hot Spot Personal Monitor receives an audio signal that is transmitted wirelessly via Bluetooth from another device to playback audio from the paired device. The Bluetooth input is separate from the two wired analog input channels and you can not split the Bluetooth signal between the two wired channels. However, if the playback device you are using has a wired output in addition to Bluetooth, you can send the output from the device using a cable. Depending on the device, it may be possible to split the stereo signal with a Y-cable. Please contact us through live chat or by phone to provide more details so we can assist you further with your setup to determine what type of adapter you may need to use with your device for a wired connection.

Q: 5. Is the the bluetooth a receiver or transmitter? If it is a receiver, is the stereo bluetooth signal split between channel 1 and 2 controls? Thanks.

A: This will receive bluetooth signals and will not use either of your avaiable input channels.

Q: 6. Is the back of the card blank empty or there is some wording on it? The pocket size seems to have something on it which is rather annoying as im looking for an empty rear side card to manually adjust the WB on camera itself than post process. Thanks

A: I've used the front for manual white balance, it works well. (Depending on your camera)But no, the back has a bunch of info, branding, a light spectrum guide, ect. Actually, I just looked at it closely, and the back is a different color. It appears the certified grey side is actually adhered to a sturdy light grey plastic layer.

Q: 7. The speaker yolk shown in the image is not listed as an item in the box. Does this speaker ship with yolk as shown?

A: The Galaxy hotspot yoke bracket is not included. It is available for purchase separately; B&H# GAYBHS.

Q: 8. Can this backdrop be used for shooting video?

A: This background can definitely be used for video applications.

Q: 9. What is the thickness of the thicker portion of the platform ?

A: With my JBL LSR308 Studio monitor sitting on these, the rear thickness still stands about 2 1/4 inches.

Q: 10. Is this card appropriate for manually adjusting white balance in camera?

A: Yes, it is designed for that. I use it that way and it works perfectly.