Kramer Vga Male To Male Cable 125Ft

Kramer Vga Male To Male Cable 125ft

Product Code: eq174305
Availability: In Stock

$288.00 $417.60

Qty

19 reviews Write a review

Description
Reviews (19)

TheKramer VGA Male to Male Cable 125ftis used for connecting a VGA source, such as a laptop or a desktop computer's graphics card, to a display, projector, or other VGA-compatible devices. Mini coaxial cabling (26 AWG) ensures accurate transmission, while the molded 15-pin HD connectors' thumbscrews and gold-plated pins help you connect the cable with ease.

Compatible with VGA Devices VGA, Male 26-Gauge Mini Coax Molded Connectors Gold-Plated Pins

Parameters
Connector 1	1x VGA Male
Connector 2	1x VGA Male
Cable Length	125' / 38.1 m
Wire Gauge	26 AWG
Packaging Info
Package Weight	9.65 lb
Box Dimensions (LxWxH)	8.7 x 7.8 x 4.1"

Related Questions and Answers

Q: 1. This will connect to my Sennheiser G3 lav mic to my iPad Pro USBC port, but will the iPad recognize it?

A: Yes, the Saramonic 3.5mm Locking Male to USB Type-C Converter Cable can be used to connect a Sennheiser G3 Series Wireless Lavalier Microphone System to the USB-C port on an iPad Pro and the iPad should recognize it as an external microphone.

Q: 2. Does this cable work with the Fujifilm XT3 vertical battery grip?

A: No, the FotodioX Power Adapter Cable - D-Tap Male to 2.1mm Barrel (17.5") would not fit the FUJIFILM VG-XT3 Vertical Battery Grip. The grip does not use that size connector.

Q: 3. Nikon D800proper tether?

A: It works 50% of the time. The repeater never worked once, but the first time I tried to use it was after the return date.

Q: 4. Can this cable connect a BMPCC 6k to a Rhino Arc II?

A: This cable is intended for power and is not a control cable.

Q: 5. Does it work with any photo software on Mac or APP on iPad Pro 12.9 2022?

A: The Tether Tools TetherPro USB Type-C Male to Micro-USB 3.0 Type B Male Cable (15', Black, Right-Angle) will support tethering a supported camera with a Micro-USB 3.0 Type B port to an iPad in an app that supports camera tethering, such as Lightroom or Capture One.

Q: 6. is this compatible with Nikon D5?

A: This cable won't work with the Nikon D5. You'll need a Mini-HDMI cable.

Q: 7. What adapter do I need to add so this stand can accept a tripod head?

A: No m10 is different forum 3/4

Q: 8. When shooting portrait mode with a Fuji battery grip and Kirk L bracket, I don't see this working with an XT-2, with or without the block,Is this correct?

A: I use an L bracket on a different camera (Nikon D810, However, the L bracket I use (RRS) has two positions, one of which pulls the short arm of the L away from the camera, permitting sufficient room for the right angle bracket to be attached & leading the cable towards the back of the camera. The straight connect which is supplied with the camera, does not work b/c the cable goes out the short arm of the L, preventing its attachment to the tripod head.

Q: 9. Will this adapter fit on a 5/8" light stand? Will the opening in the bottom fit over a light stand stud? Is that a threaded hole at the bottom side that I can attach a knob?

A: This adapter would not fit over a 5/8" stud on a light stand. A better option for this is the Avenger E390 TVMP Yoke to Stand Adapter, BH # AVE390. http://bhpho.to/3mKtX5z

Q: 10. Is this compatible to Sony 7RIII. ?

A: This is compatible with the 7RIII.

Thomas	12/09/2024
[1x VGA Male] These one foot RCA jumpers are what you need to get rid of all that cable mush in back of your components! Happy to find these! Hope I can find an AC power jumper the same size that fits my CD player to the alt AC plug in back of my receiver! 5

Brian	03/08/2024
[1x VGA Male] The cables aren't braided, thick or spectacular, but they were purchased for very short runs, in only one foot lengths, for low signal level use, and so they are as perfect as they need to be, at a very good price. If I needed longer cables, or signal transmission measured in greater than milliwatt units, I'd spend a little more. The cables won't need to be swapped out much, are of good enough quality that I'm not worried they'll ever break, and the plating will assure years of rustless service. 5

Timothy	03/08/2024
[1x VGA Male] replaced with these no problem. great price!!! 5

Christian	18/07/2024
[26 AWG] There's really not much to say about a cable, so long as it works as described (it does), the cable and connectors are durable (they are), and it wasn't ridiculously expensive (it wasn't). The only thing I need to remember is that there is a catch on the DP end that I need to press to release it... and that too seems to work properly! :) 5

Leon	16/07/2024
[1x VGA Male] Works right out of the box, I need to a plug a video outport to my old aging Monitor with a modern gpu. This do the trick just right. 5

CMS	01/07/2024
[9.65 lb] This cable is being used to connect two VGA components. It was purchased because it was short. It works great in this application. Seems to be a good quality cable. 5

Martin	25/06/2024
[1x VGA Male] I bought this to connect my aging Samsung monitor, which only has DVI and VGA inputs, to my new computer which only has DisplayPort and HDMI outputs. Since the monitor doesn't have a sound system in it, DisplayPort is the natural choice, and I use the HDMI of for my pen tablet. Cable works flawlessly with no problems in picture quality and has plenty of length to be able to stow the computer out of the way. It feels durable enough to last many years. 5

Glenn	14/06/2024
[9.65 lb] I bought this cable to connect an HP t630 thin client to an Acer monitor that has a DVI input but no HDMI or DisplayPort input. It works perfectly - no problems. 5