The Tempo PA70025 DataShark RJ45 Network Tester Kitis a continuity tester for UTP and flat satin cables with RJ45 terminations. It is intended to troubleshoot problems in telephone and computer network cables and identify good connections, shorts, and cross-connections.

The kit comes with a main unit for transmitting signals and test patch cords, a remote unit for testing installed cable runs, two RJ45 patch cords to connect the tester to a wall jack or patch panel, and a carrying case to conveniently transport and store your equipment.

Troubleshoot Problems in Network Cables    Test Patch Cables & Installed Cable Runs    Find Open, Short & Cross Connections    Automatic Test Cycle    LED Mapping Display for Each Pin    Fast or Slow Display Speeds

• Quickly and easily test both telephone or computer patch cables and installed cable runs 
• Continuity tester for UTP and flat satin cables with RJ45 terminations
• Identifies good connections, opens, shorts, and cross-connections
• Automatic test cycle
• LED clearly lights for each pin and maps the cable
• Cable test begins once the cable is plugged into the unit and the tester’s power button is set to On
• Choice of fast or slow display speeds
• Maximum Cable Length: 1000'
• Can also be used to test RJ11 and RJ12 connections
• Operates up to 50 hours with a fully charged 9V battery

• Main unit 
• Remote unit 
• Two RJ45 patch cords 
• Carrying case

Related Questions and Answers

Q: 1. Can it be used to test AA Lithium?

A: Yes, will read AA lithium batteries. The type of battery is not important just the voltage rating.

Q: 2. Do Audyssey settings apply to audio out signal at Pre Out? Specifically, the dynamic volume?

A: The Audyssey apply to the Dynamic EQ & Dynamic Volume.

Q: 3. Is this made in usa?

A: Yes, this is made in the USA.

Q: 4. Does this tester tell you the percentage of charge left OR how much capacity or life is left in the battery before it stops working and you have to buy new ones?

A: This tester has 5 LED to show battery capacity left in 20% increments.

Q: 5. Does it test 1.5V AA alkaline batteries? (The specs say: A, AAA, C, D, N. Presumably the reference to A is a typo.)

A: Yes; the ZTS Mini Multi-Battery Tester tests both 1.5v alkaline AA batteries as well as 1.2v nickel metal hydride (NiMH) or nickel cadmium (NiCd) AA rechargeable batteries.

Q: 6. I want to buy this beauty my speakers are 8 ohms can I connect a pair of 4 ohms alone with my 8 ohms and have no issues.jbl l100

A: The Onkyo TX-NR6100 is rated to handle 4-16 Ohm speakers.

Q: 7. Can Sony wh-1000xm5 wireless headsets be used with unit? I like to watch tv when the rest of the house is asleep.

A: Yes, you may connect the headphones via bluetooth wireless technology or with a standard headphone cable connected to the headphone jack of the receiver.

Q: 8. Do this come with remote control?

A: Yes, the Onkyo TX-8470 Stereo Network A/V Receiver comes with a remote control.

Q: 9. Compare chart shows no info as to Pass-Thru capabilities. Does it have 8K Pass thru?

A: The Sony STR-AN1000 7.2-Channel Network A/V Receiver (BH # SOSTRAN1000) has no 8K pass through. NOTE: Be sure to connect the receiver to an HDMI input jack of a TV or video device that is supporting 4K or 8K. You have to connect an HDMI cable to an HDMI jack that supports HDCP 2.2 or HDCP 2.3 when you use a playback device for 4K or 8K resolution video content, etc. 4K or 8K content may not be displayed at the same resolution as the source: • Depending on the TV or the video device, 4K or 8K content may not be displayed. Check the video capability and settings of your TV and video device. • Be sure to use a Premium High Speed HDMI Cable with Ethernet, which supports bandwidths up to 18 Gbps. For video signals that require a high bandwidth such as 4K/120p, 8K, etc., be sure to use an Ultra High Speed HDMI Cable that supports bandwidths up to 48 Gbps.

Q: 10. Will this work for button cell batteries like A76 and other film camera batteries - 28L, Wein cell 625... ?

A: I dont think that your A76 camera battery can be successfully tested on the ZTS Mini Multi-Battery Tester MFR # MINI-MBT. The specifications are: 1.2V NiMH / NiCd rechargeable (AA, AAA, C, D) 1.5V alkaline (AA, AAA, C, D, N)3V photo lithium (CR123, CR2) 9V alkaline and carbon zinc3.6 V lithium-ion (18500, 17650, 18650, RCR123A)And according to this website, your A76 is 1.55 volts, so maybe you could use the 1.5 alkaline post? But the 28L is a 6 volt Manganese Dioxide Battery.medicbatteries battery-cross-reference-guideBut take a look at another ZTS product; MBT-1 battery tester That will test the A76.