Rdl Db-Xlr2M Dual Xlr Male Wall Plate Black

Rdl Db-xlr2m Dual Xlr Male Wall Plate Black

Product Code: eq174407
Availability: In Stock

$74.04 $95.51

Qty

16 reviews Write a review

Description
Reviews (16)

Run your XLR wiring through the wall with the black RDL DB-XLR2M Decora Wall Plate. It features dual XLR male connectors on the front and two 3-pin solder terminals on the back for a secure hardwired connection.

Dual XLR Male Terminals 3-Connector Solder Terminals

Parameters
Connectors	Front: 2 x XLR 3-pin male jacks Rear: 2 x 3-conductor solder terminals
Dimensions	1.31 x 4.11 x 1.41" (3.33 x 10.44 x 3.45 cm)
Weight	2.08 oz (58.97 g)
Packaging Info
Package Weight	0.18 lb
Box Dimensions (LxWxH)	4 x 2.1 x 2"

Related Questions and Answers

Q: 1. does it work with the eos R?

A: This will work with the cameras USB-C port.

Q: 2. If I connect the 3.8mm to a Hollyland Lark Max, and the XLRs into an Ursa Mini Pro, will it split the left and right signals?

A: If the Hollyland Lark Max receiver is set to stereo mode, then the ALZO 3.5mm Female to Dual XLR Male Stereo Microphone Adapter Cord will carry left and right signals on the first and second XLR outputs respectively. If it is set to mono mode, the same mixed signal will be carried on both XLR connectors.

Q: 3. Will this work with my stereo clippy mics which end in a 3.5 male trs to be able to use the xlr inputs for my MixPre6?

A: The ALZO 3.5mm Female to Dual XLR Male Stereo Microphone Adapter Cord for Pro Camcorders is compatible with stereo microphones which use a 3.5mm TRS connector.

Q: 4. Will this work for the ace?

A: Hi, Sam. This battery plate is for the Paralinx Tomahawk and will not work with the Ace. The Ace Transmitters/Receivers can be powered either via PTap or 2-pin power source, or by using a small battery plate designed for use with the Ace (LP-E6, L-Series, BP-9, or BP-U). Try here for battery plate options: https://www.bhphotovideo.com/c/product/1266814-REG/paralinx_11_1272_1_ace_battery_plate_with.html

Q: 5. Does this cable work with the Canon 1dx mark iii for tethering applications?

A: Yes, this would be the right cable if your computer has USB-A ports. Otherwise if it has USB-C ports than you would use https://www.bhphotovideo.com/c/product/1387549-REG/tether_tools_btkc15_org_starter_tethering_kit_with.html

Q: 6. Can we use this cable for charging?

A: The Tether Tools TetherPro USB Type-C Male to USB 3.0 Type-A Male cable is designed to be used for data transfer only, and not for charging devices.

Q: 7. Would this work with my mm-bsm-8 binaural headphones and MixPre-3 II to enable use of the kashmir XLR preamps instead of the aux-in one?

A: No, the ALZO adapter will not work because the MM-BSM-8 binaural headphones require 1.5 to 10 VDC plug-in power and the XLR inputs on the MixPre-3 II can supply 48V phantom power which is way more than needed and will likely damage the mic. The mic is designed to be used with the 3.5mm stereo plug. We have not tested it with adapters to confirm whether there will be issues with phasing and/or noise created by using a Y-type adapter, but it is very possible that could happen. If did want to try using a stereo 3.5mm Y-cable, you would need to use two XLR adapters (one for each input) like the Rode VXLR+ (B&H # ROVXLRP) which has a built-in power converter that converts phantom power to plug-in power. For the Y-adapter, you can try the Hosa Technology Stereo 3.5mm Female to Dual Mono 3.5mm Male Airline Adapter (B&H #HOYCSMF2MMRA) which splits stereo to two individual mono outputs. Again, I do want to mention that we have not tested this setup to confirm whether it will work properly or if it will sound good. We recommend connecting the mic to a 3.5mm TRS input for the proper stereo imaging it was designed to create.

Q: 8. Will this work well with the ATEM mini?

A: Assuming the computer side of the cable is the USB 3 type A it will work well.

Q: 9. What is the deepest table/desktop thickness this stand can be mounted on, i.e. 2.5 inch thick desktop, 3 inch thick desktop, etc.?

A: 2.1 inches.

Q: 10. Will this work with Nikon Z6ii and MacBook pro?

A: The Tether Tools TetherPro USB Type-C Male to USB 3.0 Type-A Male Cable (15', Orange) will not be compatible with the latest MacBook Pros. You will need the Tether Tools TetherPro USB Type-C Male to USB Type-C Male Cable (15', Orange) BH #TECUC15ORG • MFR #CUC15-ORG https://bhpho.to/3IGXvyY

Donald	24/09/2024
[0.18 lb] Installed this in our studio to add two cameras. Works fine! 5

Carol	07/09/2024
[4 x 2.1 x 2"] This worked out perfect for a project that we ended up ordering more 5

IPG	24/08/2024
[4 x 2.1 x 2"] Mogami makes great cablesthey are flexible & clean. While testing the Lynx D Sub cable next to Mogami D Sub, however, I noticed that the two wires are not so different from each other to warrant such their huge price disparity. If I have one comment to sum up my experience, the Lynx D sub to XLR cable is a great product for the money. 5

David	24/08/2024
[4 x 2.1 x 2"] Was easy to install and works great. 5

radioops	15/08/2024
[4 x 2.1 x 2"] If you're going to plug into a mult box, better have one of these handy! 5

paul	01/08/2024
[4 x 2.1 x 2"] easy to use and working fine 5

Jacob	28/06/2024
[4 x 2.1 x 2"] Good quality, straightforward install, smooth connection. What is not to like? 5

EdTechGuy	05/06/2024
[0.18 lb] RDL's XLR jacks offer an attractive alternative to locking panel/wall jacks that eventually fail to lock/unlock. The Decora style makes it easy to match with other connectors in their line. 5

Patrick	19/05/2024
[0.18 lb] Fit this Neutrik NA3FDM XLR Female to Male Feedthrough Adapter for Panel Mount into a RapcoHorizon SP-1DFN XLR Single Gang Wall Plate with 1 Neutrik NC3FD-L-1 Connector after knocking out the rivets, then re-riveting it to the plate. Then I fit it into a movable pulpit where the original jack had been abused and the soldered connections severed. In a church environment, who can fix that, and who needs downtime? Especially with very young and active kids! 5