The silver RDL DB-RC4ST 4-Channel Remote Control for ST-SX4 Audio Switcherfrom RDL DB-RC4ST 4-Channel Remote Control for ST-SX4 Audio Switcheris a wall-box mounted remote module designed to directly control an RDL ST-SX4 Audio Switcher Module. The ST-SX4 provides solid-state switching of one of four unbalanced audio inputs to a single unbalanced audio output. The DB-RC4ST connects directly to the POWER and CTRL terminals of the ST-SX4 using either a 3-conductor cable or a single shielded pair.

The front panel of the DB-RC4ST features four pushbuttons with four associated LEDs. Upon initial application of power, source 1 is selected. Touching any of the other three buttons de-selects source 1 and immediately selects the source corresponding to the button pushed. An LED, adjacent to each button shows which source is selected. For stereo installations, the SLAVE output from the ST-SX4 is used to drive the CTRL input of an additional ST-SX4.

Remote Selection of 4 Audio Sources

Single-Button Selection for Each Source

Remote Selection of Unbalanced Audio Sources

3-Conductor Remote Wiring

Professional Aesthetic Appearance

Companion to other RDL Remote Controls

Related Questions and Answers

Q: 1. Will the Datavideo DE-650 record each input into a separate MP4 video file?

A: Unfortunately it will not. That is not possible with this switcher. For ISO recording of each input you'd need to look at Software and Computer Based Switching solutions. The Telestream Wirecast Gear 110 is a great option to consider, BH #TEWCGEAR110. https://bhpho.to/2kPYog8

Q: 2. I purchased SE-1200.. I'm planning to buy RMC-260,, does it have already the cable needed to connect them both? Or i need to buy the cable seperately? What cable it is?? Thank you...

A: The RMC-260 connects to the SE-1200MU through a DB9P to DB9P Cable for RS-232 Protocol. The RMC-260 comes with the needed cable.

Q: 3. if i have a toslink input can i use a coaxial output?

A: Yes, this is one of the primary functions of this unit.

Q: 4. Setting Output HDMI pada datavideo SE650Output saya semuanya Multiview

A: You can go into the SE-650 Menu and select Outputs. Within that menu, you can set individual output configuration.

Q: 5. How can the RMC be used to split the screen into two equal parts vertically. The wipe does it but split it into two equal parts horizontally. This is to help us show both the presentation and the camera concurrently on the screen.

A: The RMC-260 comes with several User Settings or preset buttons. This would allow you to set up 2 PIP images on the screen, at the same time, so you could have two video sources playing on the output. The user setting makes this easy to move from PIP back to normal switching. Visit a href= http://Datavideo.com target= _blank Datavideo.com/a to watch a tutorial video on how to do use this feature.

Q: 6. If I have a pair of RCA inputs (coming from right and left outputs from a turntable), can this unit send both inputs (right and left) to the optical output (to get stereo sound)?

A: The Inday DA4X-R SPDIF 4x1 Digital Audio Switcher does not feature the ability to combine or mix inputs to be sent out of the device together. Because they would be summed coming out of the single optical or coax output anyhow, perhaps summing the stereo signal before it feeds the DA4X-R would allow you to achieve your desired outcome. Also note that this unit is expecting a digital signal not often found directly on turntable output connections themselves.

Q: 7. Are the keys (buttons) on this machine made of rubber?

A: Yes. The following keys are made of rubber.

Q: 8. Am I reading correctly that the SE-650 is able to embed auxiliary audio input on the HDMI output, but not on the SDI output?

A: We're not quite clear as to where you were reading that, but according to the manufacturer, audio may be embedded on all digital outputs.

Q: 9. can i use it for mac?

A: If you are referring to setting up the switcher then I am afraid not, that will be only with a Windows computer. However it does have HDMI inputs if you wanted to feed a Mac in to it as a source.

Q: 10. Can this mixer do 1080/30p and 1080/60p? Can you mix different resolutions or they have to match?

A: SE-650 will support 720p-60 as well as 1080i-60, but not 1080p. Thanks,CraigDatavideo