Rdl Ds-Rlc10M Remote Level Control Muting Rotary Stainless Steel

Rdl Ds-rlc10m Remote Level Control Muting Rotary Stainless Steel

Product Code: eq174429
Availability: In Stock

$936.69 $1,470.60

Qty

10 reviews Write a review

Description
Reviews (10)

The stainless steel RDL DS-RLC10M Remote Level Control Muting Rotary Stainless Steelfrom RDL DS-RLC10M Remote Level Control Muting Rotary Stainless Steelis a rotary remote level control with pushbutton muting that provides you adjustment at single or multiple locations. Optical encoder technology allows continuous knob rotation with a comfortable adjustment rate and long-term trouble-free and noise-free operation. These controls directly connect to any RDL VCA and OEM equipment with 0 to 10 Vdc ramp inputs.

A single DS-RLC10M may be connected to a ramp-controlled VCA using a single-pair shielded audio cable or unshielded cable. A rear-panel switch configures the control as the MASTER. The MASTER mode causes this control to drive the 0 to 10 Vdc ramp output and to monitor its pulse terminals in case any other -RLC10M controls are connected. As many as nine additional -RLC10M controls may be wired in parallel with the MASTER control using UTP cable (CAT5, CAT6 or equivalent). The rear-panel MODE switch on each additional remote control is set to SLAVE mode.

Operation is the same for a single control, or for each control connected in a multiple control point installation. The 0 to 10 Vdc ramp voltage is incremented up or down when the front-panel knob is rotated. Acceleration is provided so the rate of change is faster when the knob is rotated more rapidly, yielding a responsive feel and rapid elimination of acoustic feedback. The LED ring display encircling the control knob operates as a virtual pointer. When an -RLC10M is not being adjusted, its display switches to a dim intensity to avoid being a visual distraction. The display returns to a bright intensity during adjustment.

Upon power-up or re-powering after a power loss, the 0 to 10 Vdc ramp will output either a preset level or the last level used. The power-up mode is stored when the control is installed. When programmed for the preset level mode, the user can store a new preset level by holding the MUTE button for more than 3 seconds.

Multiple -RLC10M controls set to the SLAVE MODE may be connected to an RDL RU-VCA2A or RU-VCA6A, utilizing the VCA as the ramp generator. This connection is also possible with OEM equipment accepting open-collector pulses that are compatible with the -RLC10M output pulse rate and width.

Parameters
Voltage	0 to 10 VDC (Slave mode input; Master mode output)
Level Control	Optical rotary encoder (minimum to maximum: 5 (slow rotation, no acceleration) 3 (medium rotation, with acceleration) 1 (fast rotation counterclockwise)
Control	Front Panel: 1 x Momentary pushbutton, mute Bottom: 1 x 2-position switch, master slave
Connectors	Back Panel: 7 x Screw terminal block, power and control
Indicators	1 x LED, Muting 10 x LED, Level
Power Requirement	24 VDC @ 30 mA, Ground-referenced
Mounting	Mounts in standard US electrical box, RDL WB- or SMB- series boxes
Dimensions	4.11 x 1.31 x 0.98" (10.44 x 3.33 x 2.49 cm)
Weight	0.3 lb (0.1 kg)
Packaging Info
Package Weight	0.4 lb
Box Dimensions (LxWxH)	4.625 x 3.625 x 2.125"

Single or multiple control locations

Up to 10 remote control locations

Visual level display of operating level

Display is bright during adjustment and dims after adjustment

Steel frame construction

Electronics protected by rear enclosure

Detachable terminal block connections

Related Questions and Answers

Q: 1. Is it compatible with either the Canon EOS-R6 or Canon EOS-1Dx Mark III?

A: The Canon RC-6 remote is compatible for use with the Canon EOS R6 Mirrorless Digital Camera as indicated on page 433 of the Canon EOS R6 Advanced User Guide. However, the Canon RC-6 remote is not compatible for use with the Canon EOS-1D X Mark III Digital Camera.

Q: 2. Is this compatible with the 80D?

A: I use the RC6 with a 7D. I checked online and found yes the RC6 is great for the 80D. Put camera in self timer mode. If you need more than 30sec, disable the sleep mode too. If you want to use the 80D with Wi-Fi, install the Canon Camera Connect app on your iPhone or droid! Don't you just love B&H for products, pricing and great support?!

Q: 3. Is it compatible with a eos m10

A: Yes, this remote is compatible with the Canon EOS M10.

Q: 4. does it work with canon m6 ?

A: Yes it is compatible with a Canon M6.

Q: 5. Can the RC-6 trigger the video on the eos 60d?

A: Yes it will, just make sure you enable the remote function on your camera.

Q: 6. Can the battery holder be bought separately as a replacement part?

A: No, you can try getting it from Canon but buying a new one is your best option.

Q: 7. can the Canon RC-6 trigger work with the Canon R5?

A: Yes. This remote can be used with the Canon EOS R5.

Q: 8. Will this work with canon 5d mark III?

A: Yes, the Canon RC-6 Wireless Remote Control is fully compatible for use with the Canon EOS 5D Mark III DSLR Camera.

Q: 9. Does this work for long exposures? On Bulb?

A: Yes it does. While in bulb mode on the camera: press once to start exposure, then press a second time to end it.

Q: 10. will RC-6 remote work with 1ds mark III?

A: No, the Canon RC-6 Wireless Remote Control is not compatible for use with the Canon EOS 1Ds Mark III DSLR camera.

Tim the PM	26/09/2024
[0.3 lb (0.1 kg)] match existing perfectly 5

Gregory	18/09/2024
[0.4 lb] RDL makes a very good series of mixers. This line mixer works very well and saves space. Great for mixing line level inputs 5

Dominick	01/09/2024
[0.4 lb] It works great and hasn't died on me so far. 5

Brent	21/08/2024
[0.4 lb] This item worked as expected. It was purchased to amp a line level signal going into an amp. Just make sure you purchase the power supply as well. It is sold separately from the device itself. 5

Rebeccal	24/05/2024
[0.3 lb (0.1 kg)] Just needed to have one ceiling mounted microphone output go to two destinations. Nothing fancy. That describes this item - nothing fancy. It gets the job done in a small space, don't need special training to install- it's easy! 5

Eric	16/05/2024
[0.3 lb (0.1 kg)] Overall, excellent. I only wish they offered a model with five channels, mini stereo jacks on all inputs, and have one channel with built in audio isolation transformer. Obviously, that would cost more, but then it would go from a great mixer to a perfect one. 5

Tim the PM	11/05/2024
[0.3 lb (0.1 kg)] very durable w/perfect fit 5

Brice	04/05/2024
[0.4 lb] I bought this from B&H in June 2014. It's now Dec 2019, and this amp is still performing flawlessly. I use it to combine 3 different audio sources into a single output that I distribute to various powered speakers throughout my house. I like that I can set the amplification for each source to make each source equal volume on the output. That way I don't have to constantly jockey the volumes when I play a new source. I also love that I don't have to switch anything around. I can play all three (or four) source at the same time if I want, or just stop one and start the other without having to touch any input switches or anything. I have my computer, my bluetooth adapter, and my record player pre-amp all on this thing, and I can easily just start playing the new source without touching anything. I love it. I have it mounted vertically behind the little table that holds the livingroom computer so if I do ever need to adjust anything, it's quick and easy. I do sometimes use the knob to adjust the volume of my record player input. 5

Robert	03/05/2024
[0.3 lb (0.1 kg)] I've always loved using these in radio, so when I had to build a microphone distribution amp, this was my first and only choice. 5