Veracity 8+1-Port Camswitch Poe Switch 802.3At

Veracity 8+1-port Camswitch Poe Switch 802.3at

Product Code: eq174465
Availability: In Stock

$1,259.76 $1,927.43

Qty

17 reviews Write a review

Description
Reviews (17)

The Veracity 8+1-Port CAMSWITCH PoE Switch 802.3atfrom Veracity 8+1-Port CAMSWITCH PoE Switch 802.3atoffers network solution for transport, battery, solar, and low-voltage applications. It is a compact and versatile switch that provides PoE+ from a wide input range of 8.5 to 50VDC. It supplies up to 80 W total power when input is above 10V, 50W when the input voltage drops below 10V. CAMSWITCH Mobile provides a network connection and optional PoE to 8 cameras. PoE is converted to IEEE 802.3af/802.3at levels from a 10 or 40 VDC supply. The power output can be maximized up to 80W of total power, at its rated ambient temperature of 122°F (50°C).

CAMSWITCH Mobile can operate from an 8.5 to 50VDC supply, and step this up to a steady PoE voltage, internally. It is equipped with 8 network ports with 802.3at PoE and two data-only ports. All ports support 10/100 Base-T with auto-negotiation and auto-crossover. PoE is delivered on the Ethernet data pairs for compatibility with external 4-pin. The switch has a rugged enclosure with adjustable mounting brackets.

8 x Network Ports 2 x Data Only Ports 802.3af PoE/802.3at PoE Standards Converts Wide Input Voltage Range to PoE Up to 80 W Total Output Auto-Configuring 10/100 Ethernet Switch

Performance
PoE Standard	IEEE 802.3.af/IEEE 802.3at compatible
Ports	8 x Network ports with 802.3at PoE 2 x Data only 1 x 12/24 VDC Power input
Rate	10BASE-T or 100BASE-T and duplex, auto-configuring for speed
Cable	Straight through or crossover Cat5, Cat5e, or Cat6 patch supports VLAN trunking
Power
Connector	Detachable screw terminal
Voltage	8.5 - 50 V (minimum startup voltage is 10.5 V, supports engine cranking and reduce over-discharge) DC only
Fuse Rating	Power Budget: 80 W Fuse Rating (12 V): 10 A Fuse Rating (24 V): 5 A Power Budget: 60 W Fuse Rating (12 V): 7.5 A Fuse Rating (24 V): 4 A Power Budget: 40 W Fuse Rating (12 V): 5 A Fuse Rating (24 V): 3 A Power Budget: 20 W Fuse Rating (12 V): 3 A Fuse Rating (24 V): 2 A Power Budget: No PoE Fuse Rating (12 V): 2 A Fuse Rating (24 V): 2 A
Power Output	24 V Input: 80 W total power 12 V Input: 80 W (reduce to 65 W for maximum 86°F (30°C) rise above ambient temperature) <12 V Input: 60 W (reduce to 50 W if voltage can drop below 10 V)
LED Indicators	Green: PoE ports Constant: PoE enabled Off: No PoE requested Green: Non-PoE Ports Constant: Power OK Off: No power Yellow Constant: Ethernet OK Blink: Network activity
Physical
Temperature	14 to 122°F (-10 to 50°C)
Relative Humidity	Up to 85% (non-condensing)
Compliance	CE FCC (Part 15) RoHS
Mounting Holes	0.1" (5.0 mm) mounting holes on 4.8" (122.0 mm) centers
Dimensions	Without Clips: 4.3 x 3.9 x 1.5" (110.0 x 100.0 x 40.0 mm) Including Clips: 5.1 x 3.9 x 1.5" (131.0 x 100.0 x 40.0 mm)*
Weight	12 oz (350 g)
Packaging Info
Package Weight	1 lb
Box Dimensions (LxWxH)	5.6 x 4.4 x 1.7"

Related Questions and Answers

Q: 1. Can I use this with the rebel t6

A: The connectors on the REMOTE will fit ..... ORThey don't fit , that will determine the QuestionAlso see if you can get the CAMERA MSANUAL , that willspell out which remote to use

Q: 2. I have the 4D Controller and the old AV-1081 (RS232 in only) if I buy this AV-1281 (RS232 in/out) can I control both Cameras?

A: Yes, the Avipas 4D controller supports - IP & Serial RS-232/422/485 Communication. Yes it should allow you to control IP Network cameras and RS-232 cameras simultaneously.

Q: 3. Can this be monitored with SNMP?

A: From the manufacturer: TIMENET Pro provides a clean and simple browser interface for setting up the IP address and configuration password. The status tab displays information such as system up-time GPS lock, UTC and local time, plus an extremely useful satellite signal meter. This meter shows satellites in view, and their signal strength.

Q: 4. I also plan to use the AV-1281 with an ethernet only solution. Over the cat 6 the power will be provided through POE and the received video data with IP streaming into OBS software. Can I also use an OBS plug-in to control the camera movements as well? All three functions would be through a single cat 6 cable.

A: Yes the AViPAS AV-1281 has been successfully controlled with the OBS PTZ Plugin. Avipas advises for the AV-1281, you would need to change the UDP port from 1259 to 5678 (reboot after save the change). Otherwise, it won't connect.

Q: 5. For Canon 6D mark2?

A: No, the Canon RS-60E3 Remote Switch will not connect to the Canon 6D II.

Q: 6. Will this work with an older power light 375 photogenic brand ?

A: The Westcott Rapid Box Switch / Beauty Dish Switch Insert for Photogenic Flash Heads, BH # WE2532 can be added to the Westcott Rapid Box Switch Lantern to use it on a Photogenic Powerlight 375 monolight. https://bhpho.to/3Jf1sty

Q: 7. Is this compatible with the Canon EOS RP?

A: Yes it is compatible with the Canon EOS RP

Q: 8. What is the length of the cable?

A: The cable on the Canon RS-60E3 Remote Switch is 1.97 feet (0.6 meters) in length.

Q: 9. If I were to power off of a POE injector, what voltage does the camera need?

A: This AViPAS AV-1280 can be powered over POE 802.3af which would be about 15w. You could use this injector to power the camera https://bhpho.to/3p9Ri4R

Q: 10. How far away can the subject be?

A: At 10X, we recommend 40ft or less.

anyonymous	28/09/2024
[1 lb] I am using this PoE for a home security system with Vivotek IP8335H 720P HD Cameras. It was very esatly to install, just hooked up the network from my 4 port router to port 8 of the switch, and attached my 4 cameras to the 4 ports that supply PoE and off I went!! It has a total of 8 ports, however 1 port must be used to supply the network to the unit, then there are 4 with PoE capability and that leaves 3 regular ethernet ports. Nice switch for the price. So far I havent found any fault with this item. 5

3JG	19/09/2024
[12 oz (350 g)] My StudioLive Series 3 setup has 4 Earmix 16m units. Power over ethernet means I can move the Earmix anywhere on the stage without worrying about the power supply's length limitations. 5

anyonymous	09/09/2024
[12 oz (350 g)] Got it fast! Ordered late in the day, got it the next day, free shipping/ Works like a charm 5

Adam	29/08/2024
[12 oz (350 g)] Used for POE security cameras, which worked great! 5

Keith	22/08/2024
[1 lb] Bought the switch with a network camera. Works great with 4 PoE ports. 5

Eunwoo	14/08/2024
[1 lb] I bought this for the IEM set up at my church, and this simplifies it so much. First, it's PoE so there is no need to connect power for each Earmix and also no need for daisy chain either. And this unit feels very sturdy. Easy setup and work flawlessly. 5

Simha	14/08/2024
[12 oz (350 g)] My old switch (another brand and the only non Netgear switch) failed. Looked at several models and settled on this one. PoE is a nice plus but I don't have a need or it right now but it is a nice feature to have. Devices connect and buzz the internet with no problems. No complaints 5

Daniel	09/08/2024
[12 oz (350 g)] ... to work work with my media room, where the main line comes into the house, and before it heads to my studio. Works great and plug and play ease of set up. Good delivery, too. 5

Chris	01/08/2024
[12 oz (350 g)] We test a lot of devices for IoT configuration of networks, B&H is an awesome reliable seller and Veracity nailed this product. Easy to set up, solid heat sink to enable better temperature range, easy to use. 5