The Pro 100mm Filter Holder from Fotodiox is made for filters that are 100mm wide such as the Fotodiox Pro 100x133mm filters and the Cokin X-Pro (L) Series filters. It can hold standard 1.6-2.0mm thick filters and can be adjusted to hold 4mm thick filters as well.

The holder is large enough that it won't vignette on most lenses longer than 20mm (in 35mm format). When shooting with lenses wider than 20mm, the holder can be reversed, so that the filter goes where the adapter ring normally goes and vice versa. This keeps the filter holders out of view of the lens.

This holder requires the use of an adapter ring to mount it to your lens, which must be purchased separately.

For 100mm Wide Filters    Can Hold Filters 1.6 to 4.0mm Thick    Reversible for Super Wide-Angle Lenses    For Lenses with 49-96mm Filter Sizes    Fully Compatible with Cokin Z-Pro    Modular Configuration

The filter holder is fully compatible with all Cokin Z-Pro (L) filters and adapter rings from 49 through 96mm filter thread sizes. There are also adapters for Hasselblad B60 and B70 bayonet mounts, and Rollei Bay VI mounts.

Four short adjustment screws are included so that you can remove various sections of the holder, which allows you to insert filters of different thicknesses.

Related Questions and Answers

Q: 1. Will I be able to use my 2 150mm x 150mm (2mm thick) Firecrest ND filters with this filter holder? How? Thanks

A: No, the NiSi 100mm Filter Holder for Nikon Z 14-24mm f/2.8 S Lens can use 100mm x 150mm but not 150mm x 150mm size filters.

Q: 2. Will format Hitech 4x6 filters work with this?

A: These items were purchased as a gift. I never used them.

Q: 3. Do you sell a 77mm step up ring to use this holder on other lenses?

A: Yes, if you already have the main adapter NiSi 82mm Main Adapter for 100mm V7 Filter Holder Kit you can use the step up ring below. NiSi 77-82mm Step-Up Ring for 100mm V5/V5 Pro/V6/V7/C4 Holder BH #NIPV5AD77 • MFR #NIP-V5-AD77 https://www.bhphotovideo.com/c/product/1332052-REG/nisi_nip_v5_ad77_77mm_adapter_ring_for.html?sts=pi&

Q: 4. Is there adapter for this NISI holder for Nikon NIKKOR Z 24-120mm f/4 S Lens (Nikon Z) ?

A: No, the NiSi 100mm Filter holder is designed and made for the Nikon Z 14-24mm f/2.8 S Lens.

Q: 5. What filters can I use with this?

A: The NiSi 100mm Filter Holder can use any 100x100mm or 100x150mm filter that is 2mm thick. Since many people use the 7-14mm lens for landscapes, a common filter to use is a graduated neutral density filter to balance the exposure between the ground and the sky. Please take a look at the following link: https://bhpho.to/3jiNnzt

Q: 6. Can you use an adapter ring with this holder?

A: Yes NiSi adapter rings for the 100mm Holder can fit depending on the the filter size of your lens.

Q: 7. Will this work with a Lee 100mm x 150 mm (4 x6 ) filter?

A: Yes, this will work with a LEE 100mm x 150mm filter.

Q: 8. can this be used on nikon 14-24mm f2.8?

A: This adapter is made specifically for the Z version of the Nikon 14-24mm lens. It will not work on the 14-24mm lens made for the DSLR's.

Q: 9. Is there a way to use a Bahtinov mask with this holder?

A: The NiSi 100mm Filter Holder for Nikon Z 14-24mm f/2.8 S Lens would require a Bahtinov mask that is 100mm wide and 2mm thick. Unfortunately, we do not have any of that size right now.

Q: 10. If I mount this filter holder on an Irix 15mm f2.4 lens using the Irix adapter for this lens (lens hood mount) and an Irix circular polariser in the lens filter screw mount, can I also use a 100x100mm 2mm thk ND filter in the holder?

A: If the circular polarizing filter has front filter threads, you would be able to attach the filter holder and use an ND filter in the holder.