The black RDL CP-4B Quadruple-Slot Cover Plate Blackis a four-slot wall plate for use with RDL SMB-4 surface-mount and DC-4 desktop or wall mount boxes for RDL remote controls and jack panels. It is designed to give a polished look to your installation. The CP-4B is compatible with Decora-style products and American electrical boxes. Mounting hardware is included.

Use with RDL SMB-4 and DC-4    All-Steel Construction    Durable Powder Coated Finish    Compatible with Decora-Style Products    Mounting Hardware Included

Related Questions and Answers

Q: 1. How does this integrate with a ClearCom wired system?

A: You will need the Hollyland 2/4 Wire Converter for Intercom Systems (B&H # HO24WCONVERT) and standard XLR cables to connect the wired Clear-Com intercom system with the SYSCOM 1000T base station. The wired Clear-Com system's output will connect to the 2-wire input on the 2/4 Wire Converter and the SYSCOM 1000T connects to the 4-wire in/out.

Q: 2. Does this work with the Hollyland Solidcom C1? If so, would I lose the Program feature on the C1?

A: Yes, the Hollyland Syscom 1000T-8B Full-Duplex Intercom System with Eight Beltpacks and Headsets and the Hollyland Solidcom C1 Full-Duplex Wireless DECT Intercom System with HUB Base can be interconnected with an RJ-45 to dual XLR network cable through the 4-wire interface for use together.

Q: 3. Could a Nikon 500 f4 attached to a Nikon D500 body fit in the bag??

A: The bag's interior is 13.4 x 21.7 x 7.5 / 34 x 55 x 19 cm. The lens is 15.24 x 5.51 / 387 x 140 mm. The camera is 5.8 x 4.5 x 3.2 / 147.0 x 115.0 x 81.0 mm. Camera and lens together is approximately 18 1/2 long and since the bag is 21.7 , we see no issue.

Q: 4. Does this work for both moving coil or moving magnet phonos?

A: Unfortunately the manufacturer does not specify which cartridges are recommended, however we would recommend this unit for use with MM cartridges for best results.

Q: 5. Does the CP-E4N have provision for a shoulder strap?

A: Yes. A thin strap can be looped thru the end of the battery pack.

Q: 6. How is the volume compared to Clear com product?

A: Pretty much the same.

Q: 7. Will this work with the new Canon Speedlite 470EX-Al. If not, is there a battery pack that will? Thanks!

A: The 470ex-al does not have a port for an external battery back.

Q: 8. what power cord will work with CP-E4N to connect to Metz 64 AF-1?

A: There is no power cord that will allow these to work together. The cord on the battery pack is hardwired and the shape of the connector is different. Unfortunately the Metz P76 battery pack is no longer available. We do sell a cable that will allow you to use quantum type battery packs to power your flash. The BH# for the cable for those battery packs is QUCM4. Hope that helps.

Q: 9. Hello, I'd like to know if this bag could fit a phantom 3 inside ?Thanking you in advance

A: The Phantom 3 will not fit in this bag.

Q: 10. Do you know if this will hold a Canon 500mm f4 lens with the hood reversed?

A: The bag will be too small to fit that combination in it along with a camera. Check out B&H # LOPRBP450AW.