Rdl D-Rlc3 Remote Level Control, Preset Level, White

Rdl D-rlc3 Remote Level Control, Preset Level, White

Product Code: eq174608
Availability: In Stock

$594.21 $926.97

Qty

11 reviews Write a review

Description
Reviews (11)

The white RDL D-RLC3 Remote Level Control, Preset Level, Whitefrom RDL D-RLC3 Remote Level Control, Preset Level, Whiteis designed to directly interface with control modules which feature a 0 to 10 VDC control input utilizing an external 10kΩ resistive control, such as the ST-VCA3, RU-VCA2A and RU-VA6A voltage controlled amplifiers. The D-RLC3 has four momentary push buttons, each corresponding to one of four levels selected.

In a typical installation, the D-RLC3 is wired to a RDL VCA. The D-RLC3 runs from the same power supply as the VCA. When power is applied, the unit defaults to the NORM level. One higher level, HIGH, and two lower levels, LOW and MIN, are then available for selection. When the device is set to the HIGH position, the VCA is at maximum gain. The NORM, LOW, and MIN levels are each adjustable using trim pots on the side of the level control. The adjustments are concealed once the unit is installed.

The D-RLC3 is constructed on a durable polycarbonate-faced, powder-coated steel panel. Electronics are housed in a metal enclosure featuring a rear panel detachable terminal block for easy wiring.

Parameters
Controls	Four Momentary Push Buttons: High: 10 kΩ, 0 dB Norm: Adjustable, -3 dB to -30 dB Low: Adjustable, -5 dB to -40 dB Min: Adjustable, -10 dB to Off
Connections	Detachable terminal block
Power Requirement	Ground-referenced, 24 V @ 30 mA
Mounting	Mounts in standard US electric box
Ambient Operating Temperature	32 to 122° F (0 to 50° C)
Dimensions	4.1 x 1.6 x 1.3" (10.4 x 3.30 x 4.10 cm)
Weight	0.22 lb (0.1 kg)
Packaging Info
Package Weight	3.63 lb
Box Dimensions (LxWxH)	4.63 x 2.13 x 0.37"

Four momentary pushbuttons, each corresponding to one of four levels selected; LOW, MIN, NORM, and HIGH

Once installed, the adjustment trimmers are concealed from the user

Related Questions and Answers

Q: 1. Will this be compatible with a QSX 2001 tripod?

A: Yes, the Sunpak 620-731 is compatible with the QSX 2001 tripod.

Q: 2. Will this work with Canon Deluxe 200 Tripod?

A: This plate is not compatible with the Canon Deluxe 200 Tripod. You will need to contact the manufacturer directly for a replacement.

Q: 3. will this fit a 6630LX?

A: No, it would not. The Sunpak Quick Release Plate for Select Sunpak Tripods, B&H # SU5858D, would be the correct quick release plate for the Sunpak 6630LX Medium-Duty Aluminum Tripod. Unfortunately, the quick release plate is no longer avaialble separately.

Q: 4. Do they sell the actual plate that this attaches to as well? As in the receiver portion of the quick release system?

A: Unfortunately no we do not sell the receiver portion. A receiver portion does not exist.

Q: 5. can this clamp be placed inside another arca type clamp to rotate direction by 90 degrees?

A: Yes, this clamp has a built in Arca base.

Q: 6. will the sunpac quick release plate fit on a canon 300 tripod

A: No, Canon and Sunpak have their own proprietary quick release plates and they are not interchangeable.

Q: 7. Will this work on my Vanguard TBH 250

A: Sunpak plates will not work on Vanguard tripods. Use the Vanguard plates: https://a href= http://www.bhphotovideo.com/c/product/878138-REG target= _blank www.bhphotovideo.com/c/product/878138-REG/a

Q: 8. Can you load from top or do you have to slide in?

A: You can load from the top or slide in.

Q: 9. Will this fit the Sunpak UltraPro 643?

A: No, that is not compatible with the Sunpak UltraPro 643. It does look like the quick release plate you need is no longer made.

Q: 10. Will this clamp help me to quickly move my camera from Ronin SC to Manfrotto mvmxpro500?

A: No Manfrotto mvmxpro500 does not take Arca plate

Robert	14/07/2024
[3.63 lb] I've always loved using these in radio, so when I had to build a microphone distribution amp, this was my first and only choice. 5

Gregory	28/06/2024
[3.63 lb] RDL makes a very good series of mixers. This line mixer works very well and saves space. Great for mixing line level inputs 5

Brent	23/06/2024
[3.63 lb] This item worked as expected. It was purchased to amp a line level signal going into an amp. Just make sure you purchase the power supply as well. It is sold separately from the device itself. 5

Eric	22/06/2024
[3.63 lb] Overall, excellent. I only wish they offered a model with five channels, mini stereo jacks on all inputs, and have one channel with built in audio isolation transformer. Obviously, that would cost more, but then it would go from a great mixer to a perfect one. 5

Martin	16/06/2024
[3.63 lb] This unit performed as described. However, I needed one that had a much shorter delay so I returned it and promptly got a refund. 5

Bryan	07/06/2024
[3.63 lb] Nice and simple DA that works well for balanced signals. Wish it came with it's own PSU but eh. 5

cswroe	16/05/2024
[3.63 lb] I buy these fairly often for several different applications. They are tremendously reliable and allow low voltage control. 5

Rebeccal	13/05/2024
[3.63 lb] Just needed to have one ceiling mounted microphone output go to two destinations. Nothing fancy. That describes this item - nothing fancy. It gets the job done in a small space, don't need special training to install- it's easy! 5

Brice	26/04/2024
[3.63 lb] I bought this from B&H in June 2014. It's now Dec 2019, and this amp is still performing flawlessly. I use it to combine 3 different audio sources into a single output that I distribute to various powered speakers throughout my house. I like that I can set the amplification for each source to make each source equal volume on the output. That way I don't have to constantly jockey the volumes when I play a new source. I also love that I don't have to switch anything around. I can play all three (or four) source at the same time if I want, or just stop one and start the other without having to touch any input switches or anything. I have my computer, my bluetooth adapter, and my record player pre-amp all on this thing, and I can easily just start playing the new source without touching anything. I love it. I have it mounted vertically behind the little table that holds the livingroom computer so if I do ever need to adjust anything, it's quick and easy. I do sometimes use the knob to adjust the volume of my record player input. 5

Nikita	02/04/2024
[3.63 lb] Used this to build a relay box for a club so that a spotlight turns on when the DJ starts playing. Works as advertised. Don't forget to order the 24V power supply too. 5