The black DB-A2 Line Output Assembly from RDL is a passive audio output assembly that provides one or two unbalanced consumer level audio outputs from a balanced line-level audio source. It may be connected to the +4 dBu line level output of any RDL product, even if that output is simultaneously feeding other equipment. The DB-A2 circuit design provides a high degree of audio isolation if a user accidentally feeds a consumer-level source into it. The attenuation of such reverse signals is sufficient for most installations. The output jacks are transformer isolated from the balanced line input, and the input shield is separated from the case ground to reduce the possibility of induced hum.

The DB-A2 assembly may also be mounted directly into cabinets or most standard US single gang electrical boxes. It fits directly into back boxes (available separately) from RDL to fit cabinets or US or international walls.

Wall-mounted consumer level outputs

Single or dual outputs from mono source

Gold-plated phono jack outputs

Transformer isolation of the line outputs

Unbalanced audio outputs from a balanced line input

High attenuation of reverse signals

Related Questions and Answers

Q: 1. I'm looking for a QR system to attach my Canon DSLR to my Oben monopod, to make it quick and easy to secure the camera (and release it) each time I use it. I don't see the need for a head, as the monopod is so easy to reposition as needed (unlike a tripod)- so am thinking that the QR assembly alone should suffice. Would this product do the job I'm looking for, and is it sturdy enough to support a DSLR?

A: It will do exactly what you are asking for

Q: 2. What’s the weight support?

A: While the load capacity is not listed, it is safe to say that it would hold about 20lbs.

Q: 3. Will the boom arm support and Elinchrom BXRi 500 with a Elincrom 22 beauty dish? Should a consider a heftier configuration?

A: i agree. i have had exactly this configutaion, and especially aligning the dish is a borderline experience. i have now bought the 085BS heavy duty boom and this is the boom you want to go for. it's really sturdy and you can adjust the angle of anything you attach via a mechanism inside the boom tube. only this boom makes sense if you are serious about working fast and secure with heavy equipment on the end. to attach a small flash head with a small softbox, the 024B is ok, but for an elc1000 or a brx 500 with a big softbox or even a beatuy dish one should really consider buying the 085BS

Q: 4. The prophoto A2 is compatible with Pentax cameras?

A: The Profoto A2 can be triggered from a Pentax camera by way of the Profoto Air Remote Transceiver, BH # PRAR. However, any TTL functions would not be available. https://bhpho.to/2NnurRd

Q: 5. What is the clamp screw made of?

A: The screw for the clamp is made of metal.

Q: 6. What is the tube diameter

A: The diameter of the Manfrotto Boom Assembly, Black - 6.5' (2m) is 25mm.

Q: 7. Will this work with the Manfrotto Alu Master Air Cushioned Stand (12') to hold a Lastolite 24x24 Ezybox?

A: I use a pretty basic stand that came with my Dinalite kit and am not familiar with that stand. I did look it up on B and H and I think it will work.

Q: 8. Best monopod for sports

A: Any of the Induro monopods are very good, you can click on the link to view; https://bhpho.to/2GA2AID Also the Robus monopods are very good for the money; https://bhpho.to/2uNqAW2

Q: 9. The marketing shows this used in the field and hiking. Is the A2 weather resistant in any way?

A: The a2 does not have an IP rating but it is very portable. You would want to use it with a rain cover if you were using it in the rain.

Q: 10. Is a remote required?

A: Yes. A commander is needed. Please review the following item. Profoto Connect Pro Remote for Canon BH #PRCPCN • MFR #901321 https://bhpho.to/3dKNogh