The 2000' Camplex OM3 4-Ch Multimode Tactical Fiber LC Cable Reelfeatures a tight-buffered, round cable with 36" aqua fanouts, LC connectors, and a Schill fiber optic reel. The cable is designed for broadcast and audio deployments in indoor and extreme terrain outdoor settings. It is multi-stage machine polished and tested for < -55 dB return loss. Diagnostics documentation is supplied for each channel. The reel features a connector protection cavity, a hinged latching door, and it fully supports the required bend radius.

The cable features a polyurethane outer sheath, thick layer of aramid strength members, helically stranded core for flexibility and survivability, and mechanical optical fiber protection. It is built to withstand chemicals, cuts, abrasions, and crushing by vehicles as heavy as military tanks. It can be used directly on the ground in harsh terrain, such as mining environments.

Tight-Buffered, 36" Aqua Fanouts    Schill Reel with Cavity & Latch    Designed for Broadcast & Audio Uses    Compact, Round Design    Cut, Abrasion, Crush, Chemical Resistant    Polyurethane Outer Sheath    Thick Layer of Aramid Strength Members    Helically Stranded Core    Mechanical Optical Fiber Protection    Tested for < -55 dB Return Loss

• Designed for indoor/outdoor broadcast and audio applications
• Withstands cuts, abrasions, and crushing by tanks/vehicles
• Can be used directly on extremely harsh terrain
• Chemical resistant and suitable for petrochemical environments
• 50-micron fiber
• 36" aqua fanouts
• Multi-stage machine polished
• Tested for < -55 dB return loss
• Polyurethane outer sheath
• Thick layer of aramid strength members
• Helically stranded core for flexibility and survivability
• Mechanical optical fiber protection
• Exceeds MIL-PRF-85045 specifications

• Connector protection cavity
• Hinged latching door
• Carefully selected to support required bend radius

Related Questions and Answers

Q: 1. Can I use this tank to process 8x10" color prints using RA-4 chemicals?

A: Unfortunately no but you can use this Jobo instead: https://bhpho.to/3d6s1p9

Q: 2. I'm guessing the answer is Yes, but can I develop 1x135 AND 1x120 in ths Multi-Reel 3 tank? But not 2x135 and 1x120.

A: That is correct. Either a single 35mm and a single 120 at the same time OR two 35mm OR two 120. A tip if using one 35mm and one 120 is to take half of another reel and put that in the top of the tank to make sure the two teels with the film are pushed below the developer level. Sometimes in certain instances if you leave that gap the reels will float to the top after agitation and they may rise above the level of the developer leaving part of the film in the top reel to be undeveloped. Putting one side of another reel on the top prevents that from happening.

Q: 3. So the reel says 290 ml? Can someone break down how much developer to water I use?

A: This tank holds 20 US OZ. Look at your developer dilution. I use Sprint chemistry. For 2 rolls of 35 mm it is 4:16 and the same for one roll of 120 fiilm. The ratio is 4 oz of developer to 16oz if water.Hope this is helpful,Karey

Q: 4. how many exposures can fit on a reel?

A: The most it will handle is a 36 exposures of a 35 mm film! No medium format

Q: 5. what's difference between this and Paterson 4 x 5 Sheet Film Developing Tank with Reel?

A: Thus reply may not be helpful, but I will try -- Paterson tanks have interchangable parts. Between the parts you will need to buy and those you may already have, for 4x5 you will need a tall tank, a long center tube, and a 4x5 holder. The holder looks vaguely like a dragon and holds up to 6 sheets. I have loaded mine with up to 4 sheets in a changing bag. The tank holds twice the developer of a short tank (which is for one 120 roll of film.) If you have two 120 spools, you can develop two 120 rolls. instead of the 4x5 sheets.Other parts: a funnel to make the tank light tight, a tank top to keep the fluids in place, and a twist part to allow agitation. These are the same for small or large tanks and come with the tank.l

Q: 6. Does this tank come with an inner rod to hold the reels and a spindle to turn the reels?

A: Yes. In the Box: Paterson Multi-Reel 3 Developing Tank Paterson Center Column and Agitator Kit for Multi-Reel 3 Tank Paterson Funnel and Lid Kit Agitator Rod

Q: 7. how long does it take to fill up the entire tank with chemistry? i believe 5rolls of 135 would require 1500ml of it. do you need to compensate for time to avoid over develop negatives in the bottom?

A: It's only a matter of 10-15 seconds. I compensate about 5 seconds and have never had issues! I've never directly measured how much chemistry, but use a 2L kit and life is easy. I would guess its more around 1600ml!!

Q: 8. How long is the snake?

A: No cable is provided with this item; it is just the reel. The reel's capacity is dependent on the outer diameter of the cable you use. Cable Capacity:0.41 OD: 750' (228.6 m)0.45 OD: 600' (182.9 m)0.49 OD: 500' (152.4 m)0.58 OD: 350' (106.7 m)0.67 OD: 250' (76.2 m)

Q: 9. How tall is this tank? I am looking for something to process 5x12" sheet film.

A: This is less the 11" tall

Q: 10. Can this product be ordered with a divider disk?

A: Sorry, we were unable to find any information that Hannay Reels provides any storage reel with a divider.