The 750' Camplex OM1 12-Ch Multimode Tactical Fiber LC Cable Reelfeatures a tight-buffered, round cable with 36" orange fanouts, LC connectors, and a Schill fiber optic reel. The cable is designed for broadcast and audio deployments in indoor and extreme terrain outdoor settings. It is multi-stage machine polished and tested for < -55 dB return loss. Diagnostics documentation is supplied for each channel. The reel features a connector protection cavity, a hinged latching door, and it fully supports the required bend radius.

The cable features a polyurethane outer sheath, thick layer of aramid strength members, helically stranded core for flexibility and survivability, and mechanical optical fiber protection. It is built to withstand chemicals, cuts, abrasions, and crushing by vehicles as heavy as military tanks. It can be used directly on the ground in harsh terrain, such as mining environments.

Tight-Buffered, 36" Orange Fanouts    Schill Reel with Cavity & Latch    Designed for Broadcast & Audio Uses    Compact, Round Design    Cut, Abrasion, Crush, Chemical Resistant    Polyurethane Outer Sheath    Thick Layer of Aramid Strength Members    Helically Stranded Core    Mechanical Optical Fiber Protection    Tested for < -55 dB Return Loss

• Designed for indoor/outdoor broadcast and audio applications
• Withstands cuts, abrasions, and crushing by tanks/vehicles
• Can be used directly on extremely harsh terrain
• Chemical resistant and suitable for petrochemical environments
• 62.5-micron fiber
• 36" orange fanouts
• Multi-stage machine polished
• Tested for < -55 dB return loss
• Polyurethane outer sheath
• Thick layer of aramid strength members
• Helically stranded core for flexibility and survivability
• Mechanical optical fiber protection
• Exceeds MIL-PRF-85045 specifications

• Connector protection cavity
• Hinged latching door
• Carefully selected to support required bend radius

Related Questions and Answers

Q: 1. Will this cable work with the Sony RX100 vii?

A: Yes, this cable can be used with the RX100 vii.

Q: 2. Is this cable compatible with sony a6300 and slider One v 2?

A: Yes it is. This cable is compatible with the SlideOne V2 and the A6300.

Q: 3. how many feet of cable are on this reel?

A: How many feet of cable this reel is able to handle will be determined by the Outer Diameter of the cable used. For a cable that is .41 OD you'd get 750 feet, while a .67 OD cable will give you 250'. Here is a chart that goes over a few different cable runs:0.41 OD: 750' (228.6 m)0.45 OD: 600' (182.9 m)0.49 OD: 500' (152.4 m)0.58 OD: 350' (106.7 m)0.67 OD: 250' (76.2 m)

Q: 4. Does the multi 8 system come with the center column, or is it sold seperately?

A: Yes Aaron mine had the center column with it.....

Q: 5. I've read concerns that this cord has issues with certain data rates of 6k BRAW, is there info on what it generation of USB-C it is? Or what data rates it supports?

A: This cable supports 6K BRAW. Tilta does not provide any other specs on this cable. But they have confirmed that it does support 6K Braw recording.

Q: 6. will this work with the tilta bmpcc 4k/6k half cage?

A: This USB cable adapter will work well with a full or half cage from Tilta for the Blackmagic Pocket 4K or Pocket 6K.

Q: 7. How many millilitres does it take to fill the Multi-Reel 8 Tank?

A: The standard rule of thumb is 10 oz (300 ml) for each 35 mm plastic reel, or 2400 ml or 80 oz. It's a good idea to add a little more chemistry than that. Even if you have 7 rolls of film, you must add the 8th reel and the chemistry to reflect 8 reels to make sure no light leaks in the gap.Or, you may use 5 rolls of 120 film to fill this tank. Each reel requires 500 ml (17 oz), for 5 rolls 2.5 liters (85 oz). Any other combination of 120 and 35: before loading, stack your reels and make sure the funnel locks in place. If too high, the funnel won't lock in place. Don't do it. You won't have a tight seal and you will leak light and fog your film, or worse.

Q: 8. Will this work with the 6k pro cage?

A: Yes.

Q: 9. Is this cable compatible with the iOptron Skyguider Pro camera mount?

A: Yes, the iOptron Skyguider Pro works with standard camera shutter cables like the edelkrone S2 Shutter Release Cable.

Q: 10. There have been concerns that this cord cannot keep up with 6k braw. Do you know if it capable of being used with a 6k pro?

A: Yes, the Tilta 90° USB Type-C Cable for Tilta BMPCC 4K Cage supports 6K BRAW.