The Roto Mil-Std Waterproof Case 24" Deep with Layered Foam from SKB is a rugged and durable case for your photo, video and audio equipment. This linear low-density polyethylene case contains layered convoluted foam for product protection. It's ATA 300 (Airline Transportation Association) rated; water and dust tight and made to take a beating. It also comes with handy ambient pressure equalization and breather valves. The case is secured with stainless steel latches and hinges, and carried by recessed handles located on three sides. The case is impact, UV, solvent, corrosion and fungus resistant.

Rotational molding is a 3-stage heating process that results in evenness all around the edges of the case. The polyethylene material is inserted into a mold, and then gradually rotated until the material sticks to the edges of the mold in an even pattern. Once cooled, this plastic material forms a strong bond that minimizes sagging and potential collapse.

Holds Delicate Electronics,Cameras,Mics    Gasketed, Waterproof, Airtight    Impact-Resistant    UV, Solvent, Corrosion,Fungus-Resistant    Pressure Relief / Breather Valves    Stainless Steel Latches/Hinges    Rotationally Molded Polyethylene    Recessed Carry Handles

Related Questions and Answers

Q: 1. I have a D7200 Nikon with an 18-140 lens, will this case hold this camera in addition to maybe one more lens and a light meter and some filters?

A: Yes, my 7100 fits with a larger lens. The extra lens slots will also hold the 18-140 but not a longer lens like the xx-300. Filters will fit along with a medium size flash. You could fit two more lenses.

Q: 2. Will this fit a Roland SPD-SX?

A: Yes, I bought this case for my Roland SPD-SX about a month ago and love it. Fits perfectly.

Q: 3. Is this unit coming with layer foams ? I heard that trying to fit a Yamaha DTX 12 (with no clamps) was a tight press down for the covers and probably you need to remove a layer for an accurate fit and lid closure ?

A: Hi Jayaraj, The foam is glued into the case. This was specifically designed around the Yamaha DTX 12 and should fit with no issues. You do want some compression when closing the lid so the equipment does not shift around. We do offer the same sized case with cubed foam if you would rather create your own interior. It is our 3i-2015-7B-C. Thank you,Will

Q: 4. are the dividers removable or adjustable?

A: The divider's are removable, and able to sort however way best fit's your equipment.

Q: 5. Will this case work and fit as an airline carry on. Thnx.

A: Each air lines have their own size specifications so it is a good idea to contact the specific airlines for that.This is around the size the bag can be at the largest, The maximum dimensions cannot exceed any of the following measurements: 22 long x 14 wide x 9 tall or 115cm (56 x 36 x 23 cm). The case you are referring to is, 19.00 x 14.38 x 8.00 (48.26 x 36.53 x 20.32 cm). So it is just a bit too wide.

Q: 6. are the TSA approved locking buckles replaceable? Love the case but both buckles broke after 4 flights

A: It appears that they are not, you should contact the manufacturer to find out for sure because this is not information they have provided us and our website, and we do not carry the exact locks this case has.

Q: 7. I am interested in the SKB Roto-Molded Tripod Case (24 Tall). Would two tripods (each under 23 inches tall) and two ball heads not attached fit in this case?

A: Hi Lynette, It depends on the diameter of the tripod legs to judge if you have enough room for the two ball heads. If you have tripods for still cameras most likely they will fit as they tend to be smaller than tripods for video. Two tripods each under 23 inches should fit no problem unless the diameter of the legs closed is over 6 per tripod. To verify you could use a piece of gaffers tape and tape the the two tripods together and measure. Thank you,Will

Q: 8. Will the cut-out in this case fit the GoPro Hero4 Black camera?

A: Yes it worked great. Trust any case from skb, to quality.

Q: 9. Is it possible to remove the dividers?

A: Yes, the Think Tank insert in the SKB iSeries 1914N-8DT Waterproof Case with Think Tank Dividers (Black) is removable.

Q: 10. Will the cut-out in this case fit the GoPro Hero 4 Black?

A: Sorry, we don't own a 4 - we have a 2 and a 3 packed into it and love it for those. Think the 4 may be a little smaller, so yes it will fit, not sure how securely.