This 328 ft SMPTE OpticalCON QUAD Multimode Fiber Tactical Snakes 328ftfrom SMPTE OpticalCON QUAD Multimode Fiber Tactical Snakes 328ftis a four-fiber cable suitable for outdoor and indoor use. It features a Neutrik OpticalCON QUAD NO4MX connector on each end, COCA factory terminated and interferometrically tested to GR-326-CORE endface standards. The connectors have common LC contacts and a mechanical shutter system that shields against endface contamination. The cable is tested for < -55dB typical return and comes with diagnostics documentation.

The connectors are assembled using the Neutrik opticalCON ADVANCED system, which adds lockable, waterproof metal caps and rubber guards, especially critical for outdoor applications. This improves the cable protection and water resistance in long-term use.

Four-Fiber Outdoor / Indoor Cable    OpticalCON QUAD NO4MX Connectors    COCA Factory Terminated    GR-326-CORE Endface Standards    Neutrik opticalCON ADVANCED System    Tested for < -55dB Return Loss    Diagnostics Documentation Provided

• Four-fiber cable suitable for outdoor and indoor use
• COCA factory terminated OpticalCON QUAD NO4MX connector on each end, tested to GR-326-CORE endface standards
• Tested for < -55dB typical return loss
• Assembled using the Neutrik opticalCON ADVANCED system
• Machine polished and tested end faces
• Optical shutter mechanism for added protection
• Tactical tight buffered PUR cable

Related Questions and Answers

Q: 1. Could I use this product for a video wall of three monitors? I would like to be able to display a 1x3 video on these monitors at 1080P resolution for each monitor.

A: Dear Kelly, This is Jules from product support at Symbiosis, Decimator's master distributor for your region. The MD-Quad has four 3G-SDI inputs, one 3G-SDI output and one HDMI output. Both outputs carry the same picture at the same format. You wouldn't be able to drive three monitors with different tiles of your source to produce a video wall. The MD-Quad effectively works the other way round to take up to four inputs and put them onto one monitor. I hope this helps but if you have any questions please feel free to contact us on support@symbiosis.com. Kind Regards Jules

Q: 2. I purchased a Glyph 1TB SSD. Are there mounting options for this device?

A: Tilta does not have a SSD holder/mounting solution specifically for the Glyph, but you could try this universal holder by Smallrig that sits in the cold shoe: https://bhpho.to/3nAmVS4

Q: 3. Can the follow focus handle be switched to the right hand side?

A: sorry, for this type can only go one direction

Q: 4. What is the resolution of the HDMI output? My goal is to feed 4 1080p SDI inputs into one 4K HDMI output.

A: The DECIMATOR MD-QUAD 3G/HD/SD-SDI Quad Split Multi-Viewer with SD/HD/3G-SDI & HDMI Outputs Version 3 can only output a max resolution of 1080p via the HDMI output. The Blackmagic Design MultiView 4, BH #BLMV4, would allow for 4 1080p SDI inputs to output via HDMI in 4K.

Q: 5. Are the rail mounts passthrough?

A: Yes they are.

Q: 6. Will this pass visual time code?

A: If you are feeding this unit a signal that has Time Code Displayed it will see the Time Code and display it as well. If this is not what you are asking about and require some further assistance feel free to email us directly at provideo@bhphoto.com.

Q: 7. Can I use both HD-SDI and HDMI Outputs simultaneously?

A: Yes - both outputs will be identical.

Q: 8. Is the antenna replaceable?

A: No, the antennas are integrated into the Accsoon CineView Quad Multi-Spectrum Wireless Video Transmission System.

Q: 9. Will this hold the Z-cam?

A: No, the Tilta BMPCC 4K/6K Advanced Module (Tilta Gray) will only work with the Black Magic Pocket 4k/6k. Please note it will not support ZCAM, BM 6K Pro or BM 6k G2 models. ZCAM Cages: https://bhpho.to/40hcTrB

Q: 10. can you access the battery well without taking the cage off?

A: Yes you can. There is an opening on the bottom of the cage that allows access to the battery port.