This 656 ft Camplex SMPTE opticalCON QUAD Multimode Fiber Snakes 656ftfrom Camplex SMPTE opticalCON QUAD Multimode Fiber Snakes 656ftis a four-fiber cable suitable for outdoor and indoor use. It features a Neutrik OpticalCON QUAD NO4MX connector on each end, COCA factory terminated and interferometrically tested to GR-326-CORE endface standards. The connectors have common LC contacts and a mechanical shutter system that shields against endface contamination. The cable is tested for < -55dB typical return and comes with diagnostics documentation.

The connectors are assembled using the Neutrik opticalCON ADVANCED system, which adds lockable, waterproof metal caps and rubber guards, especially critical for outdoor applications. This improves the cable protection and water resistance in long-term use.

Four-Fiber Outdoor / Indoor Cable    OpticalCON QUAD NO4MX Connectors    COCA Factory Terminated    GR-326-CORE Endface Standards    Neutrik opticalCON ADVANCED System    Tested for < -55dB Return Loss    Diagnostics Documentation Provided

• Four-fiber cable suitable for outdoor and indoor use
• COCA factory terminated OpticalCON QUAD NO4MX connector on each end, tested to GR-326-CORE endface standards
• Tested for < -55dB typical return loss
• Assembled using the Neutrik opticalCON ADVANCED system
• Machine polished and tested end faces
• Optical shutter mechanism for added protection
• Tactical tight buffered PUR cable

Related Questions and Answers

Q: 1. will this card ork in a gigabyte motherboard with a PCI Express x16 slot, running at x4 (PCIEX4)?

A: yes this will Work on a PCIEX4

Q: 2. Is the antenna replaceable?

A: No, the antennas are integrated into the Accsoon CineView Quad Multi-Spectrum Wireless Video Transmission System.

Q: 3. do you know if the inputs can be duplicated ? to fill out the quad view if you only have 2x-3x cameras (as in Smallhd monitors)

A: No, the SWIT 21.5" 1000nits 12G-SDI HDR QD-LED Field Monitor does not support the duplication of input signals. However, you could achieve a duplicated spit layout using the SWIT 21.5" 1000nits 12G-SDI HDR QD-LED Field Monitor and a 1x4 SDI signal spitter, such as the BZBGEAR 12G-SDI 1x4 Splitter/Distribution Amplifier (BH #BZGDA12GS1X4).

Q: 4. Does this work with livestream studio?

A: Yes, this is compatible with Livestream Studio.

Q: 5. Will this charger take four of this?: a href= http://www.bhphotovideo.com/c/product/1053655-REG/anton_bauer_8675_0094_digital_battery_series_digital.html target= _blank http://www.bhphotovideo.com/c/product/1053655-REG/anton_bauer_8675_0094_digital_battery_series_digital.html/a

A: This should work with Digital 190 Gold Mount Batteries.

Q: 6. how many amps does this pull? When it is powered.

A: About 6 watts or less.

Q: 7. will this card works with a PCIe x4 slot?

A: The answer is no it requires an X8 or X16 slot.

Q: 8. What's the amperage out of this thing?

A: We assume you are asking about the amperage of the AC output. That information is not listed for this and for other AC power adapters that we can find. We would guess it to be in the 4400 to 6300 mAH range.

Q: 9. Have just purchased Anton-Bauer QBH-HD. Need cable (2 male to 3 pin female, with pin 3 neutral) to power Kino Celeb. Is such a thing available?

A: I am sorry, but we do not have a cable like that. The QBH-HD does also have a 4-Pin XLR output for 14v power. So you may be able to use a 4-Pin Male XLR to 3-Pin Female XLR Adapter with a XLR 3-Pin Male to 3-Pin Female cable.

Q: 10. Could I use this product for a video wall of three monitors? I would like to be able to display a 1x3 video on these monitors at 1080P resolution for each monitor.

A: Dear Kelly, This is Jules from product support at Symbiosis, Decimator's master distributor for your region. The MD-Quad has four 3G-SDI inputs, one 3G-SDI output and one HDMI output. Both outputs carry the same picture at the same format. You wouldn't be able to drive three monitors with different tiles of your source to produce a video wall. The MD-Quad effectively works the other way round to take up to four inputs and put them onto one monitor. I hope this helps but if you have any questions please feel free to contact us on support@symbiosis.com. Kind Regards Jules