This 1000 ft Camplex opticalCON DUO Multimode Fiber Tactical Cable Reelfrom Camplex opticalCON DUO Multimode Fiber Tactical Cable Reelis a two fiber broadcast interconnect cable with a heavy duty tactical reel. It features a Neutrik opticalCON DUO NO2MX connector on each end, COCA factory terminated and interferometrically tested to GR-326-CORE endface standards. The connectors have common LC contacts and a mechanical shutter system that shields against endface contamination. The cable is tested for < -55dB typical return and comes with diagnostics documentation. The reel includes a side reel flange.

The connectors are assembled using the Neutrik opticalCON ADVANCED system, which adds lockable, waterproof metal caps and rubber guards, especially critical for outdoor applications. This improves the cable protection and water resistance in long-term use.

Two Fiber Broadcast Interconnect Cable    Heavy Duty Reel with Side Flange    opticalCON DUO NO2MX Connectors    COCA Factory Terminated    GR-326-CORE Endface Standards    Neutrik opticalCON ADVANCED System    Tested for < -55dB Return Loss    Diagnostics Documentation Provided

• Two fiber broadcast interconnect cable
• Heavy duty tactical cable reel with side reel flange
• COCA factory terminated opticalCON DUO NO2MX connectors, tested to GR-326-CORE endface standards
• Tested for < -55dB typical return loss
• Assembled using the Neutrik opticalCON ADVANCED system
• Machine polished and tested end faces
• Optical shutter mechanism for added protection
• Tactical tight buffered PUR cable

Related Questions and Answers

Q: 1. How many ounces does this hold when full?

A: The tank requires 10oz (290ml) per 35mm roll of film. The tank can hold 5 rolls of 35mm film so it would require 50oz (1,450ml). The tank can also hold 3 rolls of 120/220 film that requires 17oz (500ml) per roll, so that is 51oz (1,500ml) for 3 rolls of 120/220 film.

Q: 2. Has anyone used 2 of these together in a pcie thunderbolt3 enclosure on the same computer?

A: While we are not aware of a specific example of this, it is possible with a large enough chassis and a computer that has enough power to run both.

Q: 3. Can this be configured to output key+fill and two other independent outputs?

A: Yes, if the application you're using supports it (like CasperCG)

Q: 4. Can I use this tank to process 8x10" color prints using RA-4 chemicals?

A: Unfortunately no but you can use this Jobo instead: https://bhpho.to/3d6s1p9

Q: 5. Will this card help me to keyout the lyrics to an Atem switcher in order to add them to my livestream program and the projector?

A: Yes if you have software that will deliver key and fill signals to separate ports. It is best to check with your software provider to see if this card is supported.

Q: 6. Does the multi 8 system come with the center column, or is it sold seperately?

A: Yes Aaron mine had the center column with it.....

Q: 7. I'm guessing the answer is Yes, but can I develop 1x135 AND 1x120 in ths Multi-Reel 3 tank? But not 2x135 and 1x120.

A: That is correct. Either a single 35mm and a single 120 at the same time OR two 35mm OR two 120. A tip if using one 35mm and one 120 is to take half of another reel and put that in the top of the tank to make sure the two teels with the film are pushed below the developer level. Sometimes in certain instances if you leave that gap the reels will float to the top after agitation and they may rise above the level of the developer leaving part of the film in the top reel to be undeveloped. Putting one side of another reel on the top prevents that from happening.

Q: 8. Can this product be ordered with a divider disk?

A: Sorry, we were unable to find any information that Hannay Reels provides any storage reel with a divider.

Q: 9. Can this card input signal analogue/ composite from a sony mc2500 camera?

A: this card only acept SDI can be in format SD or HD. Not analogue (composite)

Q: 10. What do you mean by "four bidirectional BNC SDI inputs/outputs"? can I plug a screen and use it as an output as well?

A: Each of the connections may be configured as either an input or an output but obviously not at the same time.