This 328 ft Camplex opticalCON QUAD Multimode Fiber Tactical Cable Reelfrom Camplex opticalCON QUAD Multimode Fiber Tactical Cable Reelis a four fiber broadcast interconnect cable with a heavy duty tactical reel. It features a Neutrik opticalCON QUAD NO4MX connector on each end, COCA factory terminated and interferometrically tested to GR-326-CORE endface standards. The connectors have common LC contacts and a mechanical shutter system that shields against endface contamination. The cable is tested for < -55dB typical return and comes with diagnostics documentation. The reel includes a side reel flange.

The connectors are assembled using the Neutrik opticalCON ADVANCED system, which adds lockable, waterproof metal caps and rubber guards, especially critical for outdoor applications. This improves the cable protection and water resistance in long-term use.

Four Fiber Broadcast Interconnect Cable    Heavy Duty Reel with Side Flange    opticalCON QUAD NO4MX Connectors    COCA Factory Terminated    GR-326-CORE Endface Standards    Neutrik opticalCON ADVANCED System    Tested for < -55dB Return Loss    Diagnostics Documentation Provided

• Four fiber broadcast interconnect cable
• Heavy duty tactical cable reel with side reel flange
• COCA factory terminated opticalCON QUAD NO4MX connectors, tested to GR-326-CORE endface standards
• Tested for < -55dB typical return loss
• Assembled using the Neutrik opticalCON ADVANCED system
• Machine polished and tested end faces
• Optical shutter mechanism for added protection
• Tactical tight buffered PUR cable

Related Questions and Answers

Q: 1. How many Millimeters should be used when developing 8x10" sheet film?

A: The Paterson Super System 4 Multi-Reel 5 Developing Tank can hold up to five 35mm rolls or three 120/220 rolls. The tank cannot be used for 8x10 or any sheet film.

Q: 2. I'm guessing the answer is Yes, but can I develop 1x135 AND 1x120 in ths Multi-Reel 3 tank? But not 2x135 and 1x120.

A: That is correct. Either a single 35mm and a single 120 at the same time OR two 35mm OR two 120. A tip if using one 35mm and one 120 is to take half of another reel and put that in the top of the tank to make sure the two teels with the film are pushed below the developer level. Sometimes in certain instances if you leave that gap the reels will float to the top after agitation and they may rise above the level of the developer leaving part of the film in the top reel to be undeveloped. Putting one side of another reel on the top prevents that from happening.

Q: 3. how long does it take to fill up the entire tank with chemistry? i believe 5rolls of 135 would require 1500ml of it. do you need to compensate for time to avoid over develop negatives in the bottom?

A: It's only a matter of 10-15 seconds. I compensate about 5 seconds and have never had issues! I've never directly measured how much chemistry, but use a 2L kit and life is easy. I would guess its more around 1600ml!!

Q: 4. How many ounces does this hold with 2 reels?

A: The tank holds 33.8oz (1L) with room or a bit more. 35mm x2: 20oz120 x2: 35oz

Q: 5. I know it says that this (Paterson 35mm) tank will take a single 35mm but will it also take a single 120?

A: No.If you want to develop for 120 film, check the Paterson Universal Tank with Two Reels (Super System 4) On that one you can adjust the reel height to accomodate the 120 film.

Q: 6. Does this include a funnel and agitation tube?

A: It comes with a Paterson 35mm Tank with Reel (Super System 4) and a 35mm plastic reel. A funnel and agitation tube are not included.

Q: 7. Can I use this tank to process 8x10" color prints using RA-4 chemicals?

A: Unfortunately no but you can use this Jobo instead: https://bhpho.to/3d6s1p9

Q: 8. what's difference between this and Paterson 4 x 5 Sheet Film Developing Tank with Reel?

A: Thus reply may not be helpful, but I will try -- Paterson tanks have interchangable parts. Between the parts you will need to buy and those you may already have, for 4x5 you will need a tall tank, a long center tube, and a 4x5 holder. The holder looks vaguely like a dragon and holds up to 6 sheets. I have loaded mine with up to 4 sheets in a changing bag. The tank holds twice the developer of a short tank (which is for one 120 roll of film.) If you have two 120 spools, you can develop two 120 rolls. instead of the 4x5 sheets.Other parts: a funnel to make the tank light tight, a tank top to keep the fluids in place, and a twist part to allow agitation. These are the same for small or large tanks and come with the tank.l

Q: 9. Can this product be ordered with a divider disk?

A: Sorry, we were unable to find any information that Hannay Reels provides any storage reel with a divider.

Q: 10. Does this kit come with any reels, or must they be purchased separately?

A: You have to purchase separately.