The Royer Labs SF-2MP Active Ribbon Microphone Matched Pairfrom Royer Labs SF-2MP Active Ribbon Microphone Matched Pairis a matched pair of SF-2 microphones.

Designed primarily for classical applications and acoustic instruments, the SF-2 combines high-quality audio performance with active electronics for high output. The SF-2's output of -38 dB puts its sensitivity on par with that of phantom powered condenser microphones, allowing it to be used with a wide variety of mic pres regardless of gain characteristics. The mic uses custom designed FETs to deliver quiet operation, with self-noise of lower than 18 dB. The SF-2's magnet/pole piece transducer structure gives a wide, uniform frequency response and the 1.8-micron ribbon element is designed to deliver accurate transient response. The mic also is designed to provide accurate frequency response regardless of the angle of sound striking the ribbon and for low off-axis coloration.

The electronics in the SF-2 provide the correct load to the ribbon element at all times, so its performance is never compromised by the effects of improper loading and regardless of the input characteristics of the mic-pre. Due to its low impedance output, SF-2 can be used on long cable runs with minimal signal loss. In addition, the mic is designed to resist ribbon element damage by phantom power, electrical glitches or miswired cables.

48V For High Output and Impedance Match    High SPL Capabilities    No Distortion Up to Max SPL Rating    Extremely Low Residual Noise    Ribbon Resistant to Heat and Humidity    No High Frequency Phase Distortion    Equal Sensitivity on Front and Back

Phantom powered circuitry provides high output and impedance matching

High SPL capabilities (130 dB @ 70 Hz)

No distortion up to maximum SPL rating

Extremely low residual noise

Ribbon element not affected by heat or humidity

Absence of high frequency phase distortion.

Equal sensitivity from front and back of microphone

Consistent frequency response regardless of distance

High efficiency toroidal transformer and gold plated output connector

Very low magnetic leakage

Matte black finish reduces reflected light for live and on-camera use

Related Questions and Answers

Q: 1. what does the chart stand go into is the tripod included ?

A: this does not include the tripod. We use a standard mic stand. We had purchased an Atlas Stand, B&H part # MS20 and it works great.

Q: 2. Would a Pentax 67ii body with a prime lens attached plus one more prime lens fit in the bottom compartment?

A: I can fit a Canon 5D mark III with battery grip and a 24-70L in there comfortably. I use this as as travel backpack, actually bought it in NYC at BH photo when there and it is by far the comfiest and best travel backpack I have ever used or bought! Well worth it as it's basically a half half backpack and can store your camera with easy access (and can add a separate lock) and then in the top half add your shopping or a jumper etc..

Q: 3. will this work with leica cl?

A: Unfortunately LightPix Labs FlashQ x20 with Transmitter for Sony is not compatible with the Leica CL.

Q: 4. is there a softbox to fit this light?

A: Currently there is not a softbox for this light. Your best bet to soften it more would be to shoot it through a silk.

Q: 5. Is there manual mode?

A: Yes. For instructions, please see the quick start guide on our overview page or the manual included in the box.

Q: 6. are the gels included removable from their carriers ?i'd like to change out these colors for my own gels.

A: Unfortunately, the gels are not removable from their carriers.

Q: 7. What is part number of Grid for this kit?

A: My grid came with the Barn Door Kit. Like you have never been able to locate an additional or different size grid for this barn door attachment. Even searched Impact's website, no luck.

Q: 8. Does this fit on impact vsd300 monolights?

A: Unfortunately, this barndoor kit does not fit the VSD 300 monolights. A better option is the Interfit 4 Leaf Barndoor Set for Interfit Flash Heads - Includes Filter Holder B&H # INBD. Please see the image below.

Q: 9. Will this work as a trigger on my Sony A7iii using my HVL-F43M off camera?

A: BH #LIFQRECT2BLK is only a receiver. You would also need the transmitter. It is also a manual only system so you would not get the full range of features of the flash.

Q: 10. Would a micro 4/3 camera with a zoom lens attached plus another small prime lens fit in the TOP compartment? I plan to put a full size camera and lenses in the bottom compartment.

A: This bag is meant to hold a single camera and 3 lenses. It may not be a good fit when using 2 cameras and additional lenses. We do not recommend it for that. You may want to look at larger bags designed to hold more than 1 camera, such as B&H # CAGBD200EG.