[Landscape] How I use the product: I use it to keep my TV on the wall. Things that are great about it: It swings out to allow access to the cables.Not so great: The kit comes with several different length spacers so you can select how far from the wall you want your TV, but it doesn't come with enough different length screws for each size spacer. For the ones I wanted to use, I had to cut four screws that were too long. This unit is worth the $I paid for it ...

[24 lb] Solid construction, easy to install. The design is very well thought out. Adjustments to center the TV and level it are simple and work very well. Extra bolts, spacers, washers, etc. make it adaptable for just about any TV. I would definitely buy this wall mount again.

[24 lb] This is my second Sanus wall mount and my second installation DYI. Both were the ML11. I also downloaded the free Sanus wall mount application for iPad, which helped a great deal. I believe the same information is available online. Your greatest challenge will be to locate your wall studs accurately, and to measure the location that the back plate will be hung with good accuracy. After that, installing the bolts to hold the back plate is easy enough, but you may want an allen wrench that fits the bolt to give it that last turn or two in case your power screwdriver doesn't put it all the way in (which can be a little difficult because there's a fair pit of power needed to finish the screw). All in all, no real issues getting this up and running and it works quite well once installed. A nice product. Recommended.

[31 x 21 x 4"] This wall mount was overkill for the 18lb LED SAMSUNG it was recommended for-it could easily handle 3 times that weight. So easy to install, a caveman could have done it and the 32 TV looks like it is mounted directly to the wall. The only improvement that Sanus could make would be more holes in the wall bracket.

[24 lb] This is an excellent slim mount for your flat panel tv. Comes with all the needed hardware to put it on the wall. I had it up in a half hour with no trouble at all. My TV is a Sony 46. It is a 68lb Monster but it just hangs on the wall with no trouble at all. Of course, you have to make sure you screw it into the studs. I like the flip up ability that this mount has. Pull two little cords hanging just beneath the bottom of the mount and the bottom of the TV can be pulled away from the wall. Two braces flip out and keep the bottom of the TV about 4-5 away from the wall so you can access the cord jacks. I would recommend it to any looking for a flat mount.

[600 x 400 mm] Excellent fit. Using this mount I had my 42 plasma on the wall in minutes! Very easy to use, and it allowed a considerale amount of side to side adjustment as well as super easy leveling adjustment after the tv is on the wall for tweeking. Generous amount of spacers, bolts, washers, etc..