Kupo Flex Arm - Versatile Mounting Solution

Product Code: eq17497
Availability: In Stock

$113.85 $176.47

Qty

18 reviews Write a review

Description
Reviews (18)

The 17.7" Flex Arm from Kupo has a hex stud on one side designed for the Convi Clamp or Super Viser Clamp or Super Clamp Systems. The other side has a 5/8" "Baby" stud with a male 1/4"-20 thread for lightweight clamps, cameras, microphones, lights or flash units. The flexible arm in between can be bent and holds shapes like an s-curve.

Length: 17.7" 5/8" Stud Each End

Key Specs
Load Capacity	Not Specified by Manufacturer
Connections	1 x 3/8"-16 Female Stud + 1/4"-20 Male Thread
Length	17.7" / 44.96 cm
Parameters
Connections	1 x 3/8"-16 Female Stud + 1/4"-20 Male Thread
Number of Sections	1
Points of Articulation	No
Length	17.7" / 44.96 cm
Weight	14.46 oz / 410 g
Packaging Info
Package Weight	1.15 lb
Box Dimensions (LxWxH)	11.3 x 6.2 x 1.8"

Related Questions and Answers

Q: 1. how much weight can this hold and can this hold the flash laterally? is this better than vello flexible arm bracket?

A: It will definitely bend with the weight of a flash if positioned laterally, but you could position it like this: https://bit.ly/38QBWXO The manufacturer does not give weight limit specifications, but the typical 1.25lbs. (with batteries) or so top of the line flash from major camera manufacturers (e.g. Nikon and Canon) should be fine. I would consider it to be functionally equivalent to the Vello product (BH #VECB900): https://bhpho.to/2UfJZIk

Q: 2. Is there anything at all similar to this that fits a 1 inch pipe? I need to mount a jib hot head control arm unconventionally.

A: We do not carry any products simlar to the Kupo 3-Axis Camera Mounting Plate Kit that fit a 1" pipe.

Q: 3. Does my monitor need a screw mount on the side in order to use this? I have a 7" monitor with only a screw mount on the bottom.

A: In order for the included arm to be effective with a 7" monitor, it would be recommended to use a monitor with a side 1/4" 20 screw mount. Otherwise, you may want to consider a longer alternative arm along with the Ronin mount individually: DIRSM01. https://www.bhphotovideo.com/c/product/1441471-REG/digitalfoto_solution_limited_rs_m01_dji_ronin_s_mounting.html

Q: 4. What boom arm or pole is recommended for this Kupo Pivoting boom arm clamp? The Kupo steel baby boom does not fit in the opening of the kapok arm clamp.

A: HI,Kupo pivoting clamp is constructed by solid aluminum die-casting &plastic cardboard insert which can fit a wider tubing size from3035mm diameter boom. With 1-1/8 ( 28mm) male pin and 5/8 (16mm) female receiver, the attachment of clamp can fit into juniorreceiver or mount on baby pin which gives great flexibility andadjustment.Look at using Kupo C-Stand Columns.Chrome plated steel C-Stand tube2 risers, 3 sections(Dia.: 35mm, 30mm, 25mm)I hope this helps.Regards,Will HBrand Manager Lighting, Mac Group US

Q: 5. Would it fit with D850/battery grip in RRS L frame?

A: It could be used with a RRS L bracket for the D850 https://bhpho.to/2KHDZpu.

Q: 6. How long? Specs don’t say.

A: It is 17.7" long.

Q: 7. will this fit in an Impact Super Clamp?

A: Yes it will

Q: 8. what is the weight capacity?

A: Kupo recommends a maximum load capacity of 44lbs / 20kg, for the Kupo 3-Axis Camera Mounting Plate Kit.

Q: 9. Is this one lamp or two?

A: This Smith-Victor Dual Desktop LED Light with Versatile Mounting Arm and Clamp BH #SM401740 • MFR #401740 would only come with 1 LED light.

Q: 10. How much weight can it support?

A: Kupo Vision Arm with Shoe Mounting Foot can support up to 4LB without losing tension.

Joseph	26/09/2024
[1.15 lb] Can only say it works on my upgraded 2ft 6 Bank Kino Flo shell. Locking is smooth and easy but needs extra turn due to the added weight. Not sure how long it will last, but can't beat the PRICE! Will purchase few more for future upgrades! 5

Jack	13/09/2024
[1.15 lb] Great idea. Provides good support. Innovative product. Kupo is doing a good job. 5

Kenneth E	18/08/2024
[1] Great Design, Easy Setup 5

Jay	09/08/2024
[1.15 lb] I used these to position my lights. I am using them with Kupo Convi Clamp & some varipoles from Impact. 5

Marty	29/07/2024
[1] Perfect when you need extra support on a C-stand arm with a heavier load. 5

Heinz	22/07/2024
[1.15 lb] Very nice design and solid. 5

oopwah	16/07/2024
[1.15 lb] This arm is meant to be used with the Kupo 3 way clamp. It attaches in seconds and adds additional support for the 40 arms to hold your accessories such as lights,etc. If you use light weight stands for on location you know the more elaborate you get with the lights and reflectors the stands need sandbags because of additional weight. Additional weight causes the grips to slip or the arm s to bend, This item will stop these two problems. 5

William	07/07/2024
[1.15 lb] Quality product. This worked just as I predicted. I used it to mount a 27 monitor to a C-stand. The mounting plate that was delivered was not square (like shown in the picture), it was in the shape of an X with the baby pin protruding out the back. 5

Eduardo	04/07/2024
[1] Very good, very price 5

Chadwin	11/06/2024
[1.15 lb] The mount is made of solid metal and fits perfectly. Since DJI wasnt smart enough to add a standard 1/4 20 thread mount anywhere on the Ronin S, Im glad I found this! I use it to mount my monitor and it works great. 5