The Tempo 801K Premium Tone and Probe Kitis a kit comprised of a Tempo 801K Premium Tone and Probe Kit200FP Filtered Tone Probe, a 77HP-G/6A High Power Tone Generator, and a Cordura carrying case. The probe and tone-generator are intended to identify or trace wires and cables without ever surrounding removing insulation.

The probe, which can operate at levels of 35 dB, has been designed to filter all power-related noise to eliminate the interference of the phenomenon of "power line hum". The accompanying power-tone generator provides the alternating 890/960 Hz signal, and can identify conductors within bundles, at cross-connection points, or at remote ends. Both the tone generator and the probe are battery powered, lasting up to 50 hours off of a 9V battery. When the items are not in use, you can store them in the Cordura carrying case.

Tone Probe, Tone Generator    For Tracing and Identifying Wires    Negates Need to Remove Insulation    Filtered Design Eliminates Power Hum    Identifies Conductors at Multiple Points    Both Units Powered by 9V Batteries    50 Hour Battery Life on Probe    100 Hour Battery Life on Generator    Includes Case

Related Questions and Answers

Q: 1. What’s the best set up for the Panasonic S1H? Should I get the Canon EF model and use an adapter?

A: Being that the lens is fully manual, you can use either the Canon EF, Nikon F or Pentax K model with the appropriate Leica L mount adapter.

Q: 2. is it compatible with a Canon EOS RP? I have the EF adaptor and it is not working...

A: While the Venus Optics Laowa 24mm f/14 Probe Lens for Canon EF may be used on the Canon Mount Adapter EF-EOS R, do note that the Venus Optics Laowa 24mm f/14 Probe Lens for Canon EF is a fully manual lens with no electronic contacts. As such, you would have to use the lens in full Manual [M] Mode or Aperture Value [Av] Mode (though you need to set the aperture using the aperture ring on the lens, not via the Control Dial on the camera body) and you must focus the lens manually. The lens will not autofocus and you cannot use the Auto or Scene modes when using the above lens on a Canon EOS R-series camera.

Q: 3. Can you use this lens with Canon EOS R5 with the Ef to Rf adapter?

A: Yes.

Q: 4. Do I need a Slider to use the lens?

A: You don't necessarily need a macro slide but would greatly improve image quality and precise positioning.

Q: 5. Hi! Can i use this f mount lens on a pocket 6k or any ther ef mount camera with an F to EF adapter? Thanks!

A: Both cameras Blackmagic Design Pocket Cinema Camera 6K and 6K pro have a Canon EF mount. You can purchase the lens with the camera mount "Canon EF". If you already own a Nikon F-mount version you can use the following lens adaptor Vello Nikon F Lens to Canon EF/EF-S-Mount Camera Lens Adapter BH #VELACEFNF .

Q: 6. Whats new in this release?

A: This model has a direct Sony E mount on it.

Q: 7. Can the Waterproof Front Lens Barrel be submerged in salt water? If yes what are the cleaning recommendations after salt water exposure?

A: Yes, rinse of with fresh water and dry promptly.

Q: 8. Is this lens sharp enough for 50MP stills?

A: This lens is very, very affordable for what it does. Therefore compromises were taken. We would say the optical quality is fine for prosumers but not up to critical high end work.

Q: 9. What is the hyper focal distance at F14 and F40? I use a Canon 90D.

A: The hyperfocal distance of the Venus Optics Laowa 24mm f/14 Probe Lens for Canon EF at f/14 would be 3.94 feet (1.2 meters). At f/40, the hyperfocal distance would be 17.17 inches (436mm).

Q: 10. I intend to use this lens on a Canon C100MK2 with a super 35mm sensor, but would like to take advantage of the full 24mm field of view for wide angles. What adaptor do I need to avoid to the crop factor? Is that possible?

A: The C100 Mark II has an EF mount and this is an EF mount lens. There is no EF to EF adapter. When you use this lens on the C100 Mark II it will be subject to the 1.5x crop factor.