The 750' Camplex OM3 Multimode Tactical Fiber LC Cable Reel 750'features a tight-buffered, round cable with 36" aqua fanouts, LC connectors, and a Schill fiber optic reel. The cable is designed for broadcast and audio deployments in indoor and extreme terrain outdoor settings. It is multi-stage machine polished and tested for < -55 dB return loss. Diagnostics documentation is supplied for each channel. The reel features a connector protection cavity, a hinged latching door, and it fully supports the required bend radius.

The cable features a polyurethane outer sheath, thick layer of aramid strength members, helically stranded core for flexibility and survivability, and mechanical optical fiber protection. It is built to withstand chemicals, cuts, abrasions, and crushing by vehicles as heavy as military tanks. It can be used directly on the ground in harsh terrain, such as mining environments.

Tight-Buffered, 36" Aqua Fanouts    Schill Reel with Cavity & Latch    Designed for Broadcast & Audio Uses    Compact, Round Design    Cut, Abrasion, Crush, Chemical Resistant    Polyurethane Outer Sheath    Thick Layer of Aramid Strength Members    Helically Stranded Core    Mechanical Optical Fiber Protection    Tested for < -55 dB Return Loss

• Designed for indoor/outdoor broadcast and audio applications
• Withstands cuts, abrasions, and crushing by tanks/vehicles
• Can be used directly on extremely harsh terrain
• Chemical resistant and suitable for petrochemical environments
• 50-micron fiber
• 36" aqua fanouts
• Multi-stage machine polished
• Tested for < -55 dB return loss
• Polyurethane outer sheath
• Thick layer of aramid strength members
• Helically stranded core for flexibility and survivability
• Mechanical optical fiber protection
• Exceeds MIL-PRF-85045 specifications

• Connector protection cavity
• Hinged latching door
• Carefully selected to support required bend radius

Related Questions and Answers

Q: 1. What wheels are these compatible with? I want to replace with air filled wheels

A: The two center pneumatic wheels are air-filled. The manufacturer does not specify replacement pneumatics for the outer wheels of the KRANE AMG 750 Full Shooter Rig BH #KRAMG750SFR Wheel Size: 10" / 25.4 cm (Middle) 6" / 15.2 cm (Front, Swiveled) 6" / 15.2 cm (Rear, Swiveled)

Q: 2. Does this kit come with any reels, or must they be purchased separately?

A: You have to purchase separately.

Q: 3. is this light tight without the rubberized cover? i.e. just the funnel thing in place.

A: Yes, it's light tight as long as you have the funnel set in correctly and twisted until it snaps in place.

Q: 4. Will this work with a Bowen 500 Gemini 500pro?

A: According to the manufacturer this will work with a Gemini 500Pro.

Q: 5. Where are these made?

A: Logan Electric Slide File #200 Holds 750 2 x 2" Slides manufacture facilities are in China.

Q: 6. What shelves or bags are included?

A: This kit included the cart, with carpeted decks, a full shelf kit/workstation, a padded carry case for the shelf kit, four padded handles for the shelf kit, four hooks and bungees and 2 cargo bags

Q: 7. Is this compatible with the old Calumet Standard Head 1 or Standard Head S2?

A: It would not be compatible.

Q: 8. So the reel says 290 ml? Can someone break down how much developer to water I use?

A: This tank holds 20 US OZ. Look at your developer dilution. I use Sprint chemistry. For 2 rolls of 35 mm it is 4:16 and the same for one roll of 120 fiilm. The ratio is 4 oz of developer to 16oz if water.Hope this is helpful,Karey

Q: 9. Does this include a funnel and agitation tube?

A: It comes with a Paterson 35mm Tank with Reel (Super System 4) and a 35mm plastic reel. A funnel and agitation tube are not included.

Q: 10. two questions really1. Is there an accessory i can pick up that will allow me to use a westcott parabolic umbrella easily with this (pointing the 750 into the umbrella or shooting through it)? My lightstand will be an impact branded chrome c-stand.2. im going to be shooting primarily outside and would like to daylight balance the light. I know this can be done with gels. The question i have is where and how to mount the gels w/o melting them.Thanks!

A: 1. This is a hanging fixture. You'd have to find some kind of adapter to change it to a stand mount. A 750W fixture is also possibly a bit too hot for your umbrella. You might consider a diffusion gel instead.2. For the gel, you'd want to use no-drip, fire resistant certified gels (Apollo, Rosco) & a gel frame available many places including B&H I'm sure. Check the diameter of the hole of the frame to be sure it is going to let most of your light thru, but you can use a generic gel frame.