Kramer Tp-121Xl Video Audio Transmitter Twisted Pair

Kramer Tp-121xl Video Audio Transmitter Twisted Pair

Product Code: eq175102
Availability: In Stock

$1,008.00 $1,552.32

Qty

11 reviews Write a review

Description
Reviews (11)

The Kramer TP-121XL Video Audio Transmitter Twisted Pairfrom Kramer TP-121XL Video Audio Transmitter Twisted Pairis a high-performance twisted pair transmitter for computer graphics video and unbalanced stereo audio signals. It converts the input signals to a CAT 5 twisted pair cable and transmits them over to a TP-122XL receiver.

Parameters
Input	1 x UXGA on a 15-pin HD connector 1 x 3.5 mm mini jack (unbalanced stereo)
Output	1 x RJ-45 connector (twisted pair)
Resolution	Up to WUXGA and 1080p
Audio Bandwidth	20 Hz - 20 kHz @-3dB
Audio S/N Ratio	84 dB
Total Gain	Audio: Analog/analog:0 dB Analog/SPDIF: -12 dBFS
Range	More than 820' (250 m)
Coupling	AC
THD + N	<0.02%
Cable Type	CAT 5; UTP (un-shielded twisted pair) or STP (shielded twisted pair)
Power Consumption	12 VDC, 190 mA (370 mA when powering both devices)
Dimensions	4.76 x 2.83 x 0.95" (12.1 x 7.18 x 2.42 cm)
Weight	Approx 0.44 lb (0.2 kg)
Packaging Info
Box Dimensions (LxWxH)	12 x 7.15 x 2.44"

Max Resolution-UXGA &1080p

HDTV Compatible

EDID Capture - CapturesEDID from the dispaly or uses pre-programmed default EDID

Interference Protection - Increased level of protection against noise, spikes, and interference in adverse environments

Power Connect System - A single connection to the transmitter or the receiver powers both units when the devices are within 200' of each other.

Related Questions and Answers

Q: 1. What outputs does the 4D transmitter utilize to get the signal to a switcher? Is a separate receiver required (which I am not seeing noted anywhere) or is there a HDMI or SDI output? Is the high bright remote monitor required for this?

A: The DJI Ronin 4D TX2 Video Transmitter will only connect to a DJI Display. It does not offer a wireless way to connect to a switcher. Works with BH #DJHBRM

Q: 2. Can you input 4k video into either SDI or HDMI and get 4k video out of receiver in 4k SDI or HDMI?

A: Yes, SDI to HDMI cross conversion is supported. However the 3G-SDI ports will only support HD resolutions. If you need to work with 4k you would input and output via HDMI.

Q: 3. Is it true that one transmitter can transmit to two receivers plus one M1 monitor all at the same time?

A: The Hollyland Mars 4K Wireless Video Transmission System can work with up to 4 apps, two receivers and no apps or one receiver and 2 apps. It does not have any app support when working with two receivers.

Q: 4. Can this TX be used to watch the shot being filmed on only a phone/phones via an app? Or does it need a receiver at all times?

A: Yes, the Hollyland Mars 4K Wireless Video Transmitter can send signals to the Hollyland app without the use of a receiver (RX).

Q: 5. Are these transmitters compatible with the Mars 400 Pro? To receive and transmit obviously in 1080p?

A: The Mars 400 is not compatible with the Hollyland Mars 4K Wireless Video Transmission System. However, the Mars 4k can work with the Mars 400 S PRO, Mars 300 PRO, and the Mars M1 display.

Q: 6. Would this be compatible with any receiver? Like a feelworld receiver+monitor combo?

A: The Hollyland Mars 4K Wireless Video Transmitter would work with the following Receiver. It would not work with other Brands. The Mars 4k transmitter can also output to the Hollyland Mars M1 5.5" Wireless Transceiver Monitor. Hollyland Mars 4K Wireless Video Receiver BH #HOHLMARS4KRX Hollyland Mars M1 5.5" Wireless Transceiver Monitor BH #HOMARSM1

Q: 7. Can this be powered using a USB-C to DC Barrel Power Cable coming from a Smallrig mini V-Mount Battery?

A: Yes, a Smallrig battery with USB-C support like the VB series could power the Hollyland Mars 4K Wireless Video Transmitter.

Q: 8. How many receivers can be used with one transmitter?

A: According to Hollyland, the Hollyland Mars 4K Wireless Video Transmission System will support 2 receivers.

Q: 9. Can I connect the transmitter to an atomos v monitor instead that connecting directly to the camera and then able to put the receiver in a different monitor?

A: Yes, you can connect any transmitter to an ATOMOS Ninja V Monitor because there is a HDMI Loop Out on the monitor. You can also connect a receiver to a different monitor.

Q: 10. can the antennas be removed and extended via an sma cable?

A: For the Hollyland Mars 4K Wireless Video Transmission System, the antennas aren't removable.

Woodrow	27/09/2024
[<0.02%] Used in a church sanctuary with DGK6 cable. Signals are excellent. Red/Orange/Green indicator is especially handy as well as the surface mounting hardware. 5

Theodore	14/09/2024
[84 dB] I have several pairs of PT-571/PT-572+ transmitter/receivers. They work the first time... every time. Picture and sound are great. Very little delay. I have cable lengths as long as 250 feet. 5

david	29/08/2024
[<0.02%] This piece (2) of equipment worked perfectly the first time I attached them and used them. They seem to be extremely well -constructed�and�were literally plug and play. I appreciated the nut that attached the power� to the unit to make it really secure. 5

Jon	25/08/2024
[<0.02%] These little pico tools from Kramer are an excellent solution at a good price point. Using these with 572 receivers and a Kramer 2x4 HDMI distro on the front end to send presentations to three screens over 100' of qualified (Kramer uniKat) CAT6 cable. It just works. No latency, no glitching, no resolution limits up to and including 1920 x 1080. Rack amount accessories make for a clean, manageable installation. The 572 receivers get power over ethernet, so no wall wart required at the receiver end. 5

Tom	17/08/2024
[<0.02%] I'm using 571/572s for video, with audio going to mixer and house speakers. Video and audio are not in synch. Presonix mixer has no function to delay audio. Help, anyone? 5

Mike	06/06/2024
[84 dB] This Receiver/Transmitter pair really just makes a long (up to 295ft) HDMI cable. Nothing to 'install' as much as just 'plug in'. You'll need an HDMI cable at each end - plan accordingly. Use shielded cable! 5

MACDdaddy	02/06/2024
[84 dB] Worked great. These work in pairs the PT-571 is the transmitter. You also need the the PT-572+ the receiver end. Our church uses 2 pairs of these. The one for our projector has been in use for more ten 2 years no issues at all. Rob 5

Patrick	26/05/2024
[AC] Easy to install. Little to no maintenance needed on these 5

david	17/04/2024
[<0.02%] These have worked perfectly from the time I got them. They are also less complicated than others in that the far end doesnt need electrical plug ins. Theyre great 5