Sierra Video 3232Vs-Xl 32X32 Composite Video Audio Switcher

Sierra Video 3232vs-xl 32x32 Composite Video Audio Switcher

Product Code: eq175104
Availability: In Stock

$19,800.00 $24,948.00

Qty

14 reviews Write a review

Description
Reviews (14)

The Sierra Video 3232VS-XL 32x32 Composite Video Audio Switcheris designed for routing composite video and stereo audio signals. It features 32 inputs and 32 outputs, an LCD display, and a Qwik Adjust knob rotary control interface.

The Lassen 3232VS-XL measures 3RU, and features BNC video connectors and 5-pin terminal block audio connectors. The Lassen XL also offers IP Ethernet control via a standard TCP/IP socket connection and a RS232/422 serial interface.

The Lassen XL routing switcher is designed to connect with other Sierra Video routing switcher families. The Lassen switcher can perform as either the master or the slave unit in your control system. The routing switcher can be inserted into an existing Sierra Video routing system providing additional format levels. Additional Lassen models can be linked to any Sierra Video SCP Series control panel for control of larger broadcast systems.

Composite Video
Bandwidth	> 100 MHz (-3 dB)
Video Gain	Unity
Crosstalk	-80 dB @ 1 MHz -47 dB @ 100 MHz
Switching Speed	Deterministic
Input/Output Signal	Video Level: 300 mV to 2.5V pp Max Impedance: 75 Ω nominal Return Loss: < -30 dB @ 5 MHz Connector Type: BNC
Audio
Type	Analog Stereo
Input Adjust Range	+20.5 dB to -8 dB
Output Adjust Range	+15 dB to -59.5 dB, and fully off (MUTE)
Frequency Response	20 Hz - 20 kHz ± 0.5 dB (typical -3 dB @ 120 kHz) (unity gain)
Dynamic Range	96 dB (20 Hz to 20 kHz un-weighted) (unity gain)
Crosstalk	< -80 dB @ 1 kHz (unity gain) < -60 dB @ 10 kHz (unity gain)
Total Harmonic Distortion (THD)	< 0.025% (20 Hz - 20 kHz @ +4 dBu) (unity gain)
Intermodulation Distortion	< 0.025% SMPTE-DIN @ +4 dBu (unity gain) < 0.01% CCIF @ +16 dBu (unity gain)
Input Signal	Max Source Level: +24 dBu Impedance: > 20 kΩ Connector Type: 5-pin terminal block for balanced or unbalanced operation
Output Signal	Max Source Level: +24 dBu balanced +18 dBu unbalanced Impedance: < 50 Ω Connector Type: 5-pin terminal block for balanced or unbalanced operation
Control
Control Panels	Supports SCP programmable control panels, XY & single bus control panels
Serial	General purpose 9-pin D-sub connector Switchable RS-232 or RS-422 9600, 38400, 115200 baud
Serial Protocol	SVS host, simple Kramer
RS-485	Mini-XLR for optional control panels
Ethernet	10/100 Base-T, full-duplex Connector: RJ-45
Ethernet Protocol	ARP, ICMP, TCP/IP, Telnet, HTTP
Web Server	For control interface
General
Power	90-240 VAC, 50/60 Hz (< 150 W) auto-detecting
Storage Temperature	40 to 150° F (4.4 to 65.5° C)
Operating Temperature	30 to 100° F ambient (-1.1 to 37.8° C)
Humidity	10% to 90 % non-condensing
Dimensions	19 x 18.5 x 5.25" (48.3 x 46.9 x 13.3 cm)
Weight	34 lb (15.4 kg)
Packaging Info
Package Weight	38.365 lb
Box Dimensions (LxWxH)	27.7 x 25 x 12.7"

IP (Ethernet) Control via standard TCP/IP socket connection - Mac or PC

Enhanced Video Boards 300MHz (-3dB)

RS232/422 Control

Qwik Adjust Knob Rotary Control Interface - intuitive user interface with front panel LCD display

Genlock Input- looping internal sync input for vertical interval switching

Use with other Sierra Video Routing Switchers - functions as either the master or the slave unit when used with other Sierra Video routing switchers

Related Questions and Answers

Q: 1. Hi. can i connect my HDMI laptop directly?

A: Yes, you can plug your laptop into 1 of the 2 HDMI output ports.

Q: 2. Can I use Chromo key AS WELL AS make that input to become the PiP? Basically I want a PiP window that comes in with Chroma and remove the chroma green background. In the demo video I saw the PiP and Chroma explained on two different inputs. But what I want is BOTH the PiP and Chroma Key effects to be applied on the very same input. Can I do it? Thanks.

A: No, unfortunately you won't be able to do that with our SE-1200MU switcher. You would need a 2 M/E switcher to have two different keys on one layer.

Q: 3. it is work with alpha key & fill inputs to make a layer inside it?

A: This switcher has the ability to Chroma Key and it also has two Downstream Keyers for bringing in graphics and titles.

Q: 4. Can this chart be used with other color space than Rec.709, like P3, Rec.2020 for HDR camera tests?

A: Yes, the Calibrite ColorChecker Video XL can be used to check color accuracy in any color space.

Q: 5. I don't know why chart dimensions aren't listed in the specs (?), but this reference chart is 530 x 375mm (20.87 x 14.76 in).

A: Thanks for letting us know the dimensions of the Calibrite ColorChecker Video XL.

Q: 6. can i use it for mac?

A: If you are referring to setting up the switcher then I am afraid not, that will be only with a Windows computer. However it does have HDMI inputs if you wanted to feed a Mac in to it as a source.

Q: 7. Can I connect this switcher to datavideo NVD-20 IP, to record my video

A: No. You can not record video via Ethernet coming from SE-1200 ethernet port because it sends only multicam window over network.

Q: 8. How would I connect (setup) for multi-view (viewing all input sources) Is this possible?

A: The Datavideo SE-3200 has built in Multiview and one of the HDMI outputs connected to a display would be a perfect way to setup a Multiview display output. Good info - https://bit.ly/3DQ5vMi

Q: 9. Can I use SE 900 control panel for SE-1200MU switcher?

A: No, unfortunately SE-900 control panel is not compatible with the SE-1200MU switcher. SE-1200MU has a control panel, RMC-260, that you can purchase. Thanks!

Q: 10. Can you plug a laptop directly into an input and will the mixer properly recognize the signal?

A: How well the signal will be recognized will depend on the computer itself, but that being said you should be able to connect a computer to this switcher through HDMI. It is possible.

Russell	18/09/2024
[Analog Stereo] In our DIY built video studio I use this switch to easily jump from Audio input to Audio input to a single headphone. I had used a cluster of AB switches that just got replaced with this switch. Life is good. The price is right and the performance is excellent. 5

RUSSELL	04/09/2024
[34 lb (15.4 kg)] Very solid unit. Switches have very positive feel. Unit is quiet and build/aesthetic quality is very nice. 5

JOhnnie B	27/08/2024
[Deterministic] easy to use User friendly 5

Stephen	16/08/2024
[Unity] I'm an old time video guy - if you had told me 20 years ago that I could by a 4x2 Matrix switcher for under $200 I'd say you are crazy. This thing is super easy to use and looks great. Fantastic product! 5

Tyler	01/08/2024
[Unity] I had two problems to solve. I wanted to be able to switch between game consoles without turning my entire CRT around to access the S-video port in the back. I also wanted a splitter to output to a capture card for live streams. This does both those things, and it does so without any noticeable loss in quality or added latency, at least to my eyes. 5

Mr. W.	14/07/2024
[Deterministic] Perfect for a high school on a tight budget. 5

Bryan	07/07/2024
[38.365 lb] Use the S-Video to HDMI Converter to connect an old analog video system to a new Digital TV. Without this device the entire system would have to be replaced. That was infeasible. 5

OSP	27/06/2024
[34 lb (15.4 kg)] B&H had what the local stores didn't. Allowed me to connect another tv to my fios box using the component jacks so I could view the same channel as the set in the other room. Made me a happy camper. 5

Travis	18/06/2024
[Analog Stereo] The client requested a product that would switch audio for them from multiple sources. This was exactly what they needed. 5

Andre	01/06/2024
[34 lb (15.4 kg)] I use a Logitec Harmony hub control for TV, cable TV, Netflix, music from Internet sent to amplifier and speakers, etc. The Shynybow selector (love that name) has very little conflict with other IR controlled devices, a problem I had with previous audio or AV switches. Out of the 4 inputs, only input no 1 control would conflict with the TV on/off. That left inputs 2,3,4 for which IR commands did not interfere with other devices (I only need 2 inputs in my setup). Great. Works well. 5