The 20920 Cinema Contour Fixed Frame Screen by Da-Lite has a 65 x 104" viewing area, 16:10 aspect ratio, and 123" diagonal.

Dual Vision is a flexible vinyl surface ideal for rear projection, but capable of both front and rear projection. It has a gain of 0.9 and 130° viewing angle. It is suitable for video projection under controlled ambient light conditions. With a wide viewing cone and light gray tint, a sharp image with no color shift is observed regardless of location in the room. This seamless surface can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. This surface has also achieved GREENGUARD GOLD Certification..

The aluminum frame is 3” wide by 1.63” and is covered with black Pro-Trim fabric, which absorbs excess light around the viewing area. The frame is slip-jointed at corners and joints. The screen also includes standard wall-mounting brackets.

123" Diagonal    16:10 Wide Format    Dual Vision Surface    0.9 Gain & 130° Viewing Angle    Surface is Seamless    3" Wide Frame    Pro-Trim Fabric Frame Covering

45° angle cut frame

Flat viewing surface mounted on the back of an aluminum frame with masking or cropping border

Related Questions and Answers

Q: 1. could I trigger D-Lite with flash slave trigger or as slave ? and what the x-sync speed when as slave ? thanks

A: You can set up the strobes as slaves individually or together with a sinc cable, remote or on camera flash. I believe the x sinc should be based on the flash sinc on your camera. The elinchrom web site has manuals on the d-lite 4 strobe. The optional hs trigger works great . You can control each and all strobes and use high shutter speeds.

Q: 2. Does this have the standard Elinchrome mount-will fit any Elinchrome speedrings, reflectors, etc?

A: Yes standard Elinchrome EL mount

Q: 3. Which projection does it use?

A: We think you are asking is there any protection filter available for this lens. As it often happen, a lens manufacturer creates a fisheye lens and then several months later a 3rd party maker comes up with a solution. That usually involves a large holder for the filter and an adapter for the lens. Unfortunately, there is no solution like that at this time.

Q: 4. Will this lens work with a Pentax K10 ?

A: Yes, in fact, all the lenses that I used on my K10 work just fine on my K5 and K3. This particular lens is one of my favorites. It is really sharp, has great color and even does macro - you can't go wrong.

Q: 5. Is there a portable power pack to go with the D-Lite RX 4? I can't find one anywhere. I'd like to take it outdoors for Senior sessions.

A: No, it uses mains power - for outdoors you would probably need a generator.Alternatively use something like an elinchrom ranger quadra system

Q: 6. Will this work with a canon eos 250d? Even the hot shoe included?

A: Yes, the Elinchrom Skyport transmitter included with the Elinchrom D-Lite RX 4/4 Softbox to Go Kit would be compatible with DSLR cameras such as the Canon EOS 250D.

Q: 7. I had previously ordered this and it came with an EL-Skyport Speed Transmitter. Does it still include this remote trigger?

A: Unfortunately, a transmitter is not included with the Elinchrom D-Lite RX One Flash Head. A compatible option is the Elinchrom EL-Skyport Transmitter Plus, BH # ELSTP. https://bhpho.to/3c95qbf

Q: 8. If I'm using Phottix Indra, do I still need to get an external receiver?

A: The Indra has a receiver built in.

Q: 9. does the guaranty covers/applies to mexico?

A: As long as the purchase was from B&H, it applies. However any warranty work will have to be performed by MAC Group in New York.

Q: 10. Will this fit on the new Lastolite Joe McNally Ezybox Speed-Lite 2 Plus? (B&H # LALS2430JM) (MFR # LL LS2430JM)

A: Yes it will