The 70308 Cinema Contour Fixed Frame Screen by Da-Lite has a 57.5 x 92.0" viewing area, 16:10 aspect ratio, and 109" diagonal.

Da-Mat is a unity gain vinyl surface with a smooth surface and 120° viewing angle. It features a white surface for good color reproduction in environments with controllable ambient light. Da-Mat can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. It is also GREENGUARD GOLD Certified. Black backing on the back of the viewing surface prevents light bleed-through.

The aluminum frame is 3” wide by 1.63” and is covered with black Pro-Trim fabric, which absorbs excess light around the viewing area. The frame is slip-jointed at corners and joints. The screen also includes standard wall-mounting brackets.

109" Diagonal    16:10 Wide Format    Da-Mat Surface    1.0 Gain & 120° Viewing Angle    Black Backing Retains Brightness    Surface is Seamless    3" Wide Frame    Pro-Trim Fabric Frame Covering

45° angle cut frame

Flat viewing surface mounted on the back of an aluminum frame with masking or cropping border

Standard black backing retains projected brightness

Related Questions and Answers

Q: 1. Which projection does it use?

A: We think you are asking is there any protection filter available for this lens. As it often happen, a lens manufacturer creates a fisheye lens and then several months later a 3rd party maker comes up with a solution. That usually involves a large holder for the filter and an adapter for the lens. Unfortunately, there is no solution like that at this time.

Q: 2. Does it work in a contry use 220V, 60Hz voltage power?

A: The input voltage that the Elinchrom D-Lite RX One Flash Head, B&H # ELDLRXONE, is designed to accept is 90 to 260 VAC, 50/60 Hz. It is a multi-voltage item, so it would work for your usage needs. However, do note that the flash head includes the standard USA plug and the modeling lamp designed for use on 100-120V input voltage. As such, if you will be using the light fixture internationally, you will need to purchase a plug adapter to convert the plug to the type used in your country, and you will have to purchase a modeling lamp with the correct voltage for use in your country.

Q: 3. does this work with the Vello Captain Freewave?

A: The internal receiver does not work with the Vello FreeWave Captain. If you use a receiver on the light then you will be able to use the Vello FreeWave Captain.

Q: 4. could I trigger D-Lite with flash slave trigger or as slave ? and what the x-sync speed when as slave ? thanks

A: You can set up the strobes as slaves individually or together with a sinc cable, remote or on camera flash. I believe the x sinc should be based on the flash sinc on your camera. The elinchrom web site has manuals on the d-lite 4 strobe. The optional hs trigger works great . You can control each and all strobes and use high shutter speeds.

Q: 5. Hi! Is angenieux ez compatible with angenieux extender 1.4x and 2x?

A: I'm afraid not, the 1.4x and 2x extenders are for the Optimo Zoom Lenses only.

Q: 6. does the guaranty covers/applies to mexico?

A: As long as the purchase was from B&H, it applies. However any warranty work will have to be performed by MAC Group in New York.

Q: 7. Is there a portable power pack to go with the D-Lite RX 4? I can't find one anywhere. I'd like to take it outdoors for Senior sessions.

A: No, it uses mains power - for outdoors you would probably need a generator.Alternatively use something like an elinchrom ranger quadra system

Q: 8. Hey there, can this be dismantled so I can only have the cage and the top handle mounted to the BMPCC 4k?

A: Yes, you will be able to physically separate the cage kit and use just the top handle and cage.

Q: 9. Can this be triggered by pocket wizard?

A: Only if a PocketWizard is attached to it; it does not have a built-in PW receiver.

Q: 10. Is this lens brand new?

A: Yes, this is a brand-new lens.